User's Manual

Firmware Version 1.0.0.32 UCM6102/6104/6108/6116 USER MANUAL Page 57 of 110
Figure 23: Record New IVR Prompt
 Specify the IVR file name.
 Select the format (GSM or WAV) for the IVR file.
 Select the extension which will be dialed for the user to start recording the voice prompt.
 Click the "Record" button. A request will be sent to the PBX and the PBX will then call the extension for
recording.
 Pick up the call from the extension and start the recording.
UPLOAD IVR PROMPT
In Web GUI->PBX->Internal Options->IVR Prompt page, click on "Upload IVR Prompt" and choose a file
to upload. The requirement on the audio file is as follows:
 PCM encoded.
 16 bits.
 8000HZ mono.
 In .mp3 or .wav format; or raw/ulaw/alaw/gsm file with .ulaw or .alaw suffix.
 File size smaller than 5M.
Click on to select audio file from local PC and click on to start uploading.