User's Manual

Firmware Version 1.0.0.32 UCM6102/6104/6108/6116 USER MANUAL Page 62 of 110
RING GROUP
Users could create extension for ring group which contains members that will receive the call with specific
ring strategy if the group extension has incoming calls.
CONFIGURING RING GROUP
Ring group settings can be accessed via Web GUI->PBX->Call Features->Ring Group.
Figure 27: Ring Group
 Click on "Create New Ring Group" to add ring group.
 Click on to edit the ring group.
 Click on to delete the ring group.
RING GROUP PARAMETERS
Table 24: Ring Group Parameters
Ring Group Name
Configure ring group name to identify the ring group. Letters, digits,
underscore and hyphen are allowed.
Extension
Configure the ring group extension.
Ring Group Members
Select available users to the ring group member list. Click on
to arrange the order.
Ring Strategy
Select the ring strategy.
 Ring All Simultaneously. Ring all the members at the same time
when there is incoming call to the ring group extension. If any of the
member answers the call, it will stop ringing.
 Ring In Order. Ring the members with the configured order one by
one. If the first member doesn't answer the call, it will stop ringing
the first member and start ringing the second member.