User's Manual

Firmware Version 1.0.0.32 UCM6102/6104/6108/6116 USER MANUAL Page 70 of 110
INTERNAL OPTIONS
The configuration for PBX internal options can be accessed via Web GUI->PBX->Internal Options.
INTERNAL OPTIONS/GENERAL
General Preferences
Global OutBound CID
This is the default global CallerID that is used for all outgoing calls when
no other CallerID is defined. If ther "User" tab or "VoIP Trunks" tab does
not have defined CallerID neither, this Global OutBound CID will be
used for CallerID.
Global OutBound CID Name
This is the global CallerID Name that is used for all outgoing calls. If this
value is defined, all outgoing calls will have a "CallerId Name" set to this
value. Usually this value could be your company name. Leave this value
blank if you would like to have the users' "CallerID Name" display on
outbound calls.
Operator Extension
The operator extension is the number dialed when users press "0" to exit
Voicemail. It's also available in IVR option.
Ring Timeout
Number of seconds to ring an extension before sending to the user's
voicemail box.
Extension Preferences
Enable Rand Password
If enabled, random password will be generated when the extension is
created. The default setting is enabled. It is recommended to enable it
for security purpose.
Disable Extension Range
If set to Yes, users could disable specified extension range. The default
extension range assignment are:
User Extension: 6000-6299
Conference Extension: 6300-6399
IVR Extension: 7000-7100
Ring Group Extension: 6400-6499
Queue Extensions: 6500-6599
VoiceMail Group Extension: 6600-6699
Note:
It is recommended to keep the system assignment for PBX to work