User's Manual

Firmware Version 1.0.0.32 UCM6102/6104/6108/6116 USER MANUAL Page 71 of 110
properly.
INTERNAL OPTIONS/FEATURE CODES
Call Feature
Description
Blind Transfer
 Default code: #1.
 Enter the code during active call. After hearing "Transfer",
enter the number to transfer to. Then the user will be
disconnected.
 Options
- Neither: Disable the feature code.
- Caller Enable: Enable the feature code on caller side only.
- Callee Enable: Enable the feature code on callee side only.
Attended Transfer
 Default code: *2.
 Enter the code during active call. After hearing "Transfer",
enter the number to transfer to and the user will be connected
to this number. Hang up the call to complete the attended
transfer.
 Options
- Neither: Disable the feature code.
- Caller Enable: Enable the feature code on caller side only.
- Callee Enable: Enable the feature code on callee side only.
Disconnect
 Default code: *0.
 Enter the code during active call to disconnect the call.
 Options
- Neither: Disable the feature code.
- Caller Enable: Enable the feature code on caller side only.
- Callee Enable: Enable the feature code on callee side only.
Call Parking
 Default code: #72.
 Enter the code during active call to park the call.
 Options
- Neither: Disable the feature code.
- Caller Enable: Enable the feature code on caller side only.
- Callee Enable: Enable the feature code on callee side only.
Audio Record
 Default code: *1.
 Enter the code to record the audio call.
 Options
- Neither: Disable the feature code.