User's Manual
Firmware Version 1.0.0.32 UCM6102/6104/6108/6116 USER MANUAL Page 72 of 110
- Caller Enable: Enable the feature code on caller side only.
- Callee Enable: Enable the feature code on callee side only.
Audio Mix Record
Default code: *3.
Enter the code to record the audio call and the PBX will mix
the streams natively on the fly as the call is in progress.
Options
- Neither: Disable the feature code.
- Caller Enable: Enable the feature code on caller side only.
- Callee Enable: Enable the feature code on callee side only.
Do Not Disturb (DND) Active
Default code: *77.
Do Not Disturb (DND) Deactive
Default code: *78.
Call Forward Busy Active
Default Code: *71.
Enter the code and follow the voice prompt. Or enter the code
followed by the extension to forward the call.
Call Forward Busy Deactive
Default Code: *72.
Call Forward No Answer Active
Default Code: *73.
Enter the code and follow the voice prompt. Or enter the code
followed by the extension to forward the call.
Call Forward No Answer Deactive
Default Code: *74.
Call Forward Uncondition Active
Default Code: *75.
Enter the code and follow the voice prompt. Or enter the code
followed by the extension to forward the call.
Call Forward Uncondiion Deactive
Default Code: *76.
Feature Digit Timeout
Default Setting: 1000.
This is the maximum timeout (in milliseconds) between the
digits input of the feature code.
Extension to Dial to Park a Call
Default Extension: 700.
During an active call, press to park the call.
Extensions for Parked Calls
Default Extension: 701-720.
These are the extensions where the calls will be parked, i.e.,
parking lots that the parked calls can be retrieved.
Parked Call Timeout (in secs)
Default setting: 120.
This is the timeout for the call to be parked. After the timeout,
if the call is not retrieved, the extension who parked the call
will be called back.
Dial Voice Mail
Default Code: *98.
Enter *98 and follow the voice prompt. Or dial *98 followed by
the extension and # to access the entered extension's