User's Manual

Firmware Version 1.0.0.32 UCM6102/6104/6108/6116 USER MANUAL Page 78 of 110
Trunk Time Stamps
Enables/disables attaching time stamps to trunk frames.
IAX SETTINGS/SECURITY
Call Token Optional
A single IP address or a range of IP addresses for which call token
validation is not required in the form 11.11.11.11 or
11.11.11.11/22.22.22.22.
Max Call Numbers
Limits the amount of call numbers allowed for a single IP address.
Max Nonvalidated Call
Numbers
Limits the amount of nonvalidated call numbers for all IP addresses
combined.
Call Number Limits
Limits the call numbers for a given IP range.
SIP SETTINGS
The UCM6102/UCM6104/UCM6108/UCM6116 IAX Settings can be accessed via Web GUI->PBX->SIP
Settings.
SIP SETTINGS/GENERAL
Realm For Digest
Authentication
Realms MUST be globally unique according to RFC 3261. Configure this
value as your host or domain name. The default setting is \"asterisk\". If
a system name is configured in asterisk.conf, this value will be set to the
configured system name.
UDP Port to Bind to
The default setting is 5060.
IP Address to Bind to
The default setting is 0.0.0.0, which means binding to all addresses.
Domain
Use comma to separate a list of domains that the
UCM6102/UCM6104/UCM6108/UCM6116 will be responsible for.
Allow Guest Calls
Enables/disables guest calls.
Overlap Dialing Support
Enables/disables dialing support.
Allow Transfer
Enables/disables all transfers (unless enabled in peers or users)
initiated by the endpoint. The Dial() options 't' and 'T' are not related to
whether SIP transfers are allowed or not.
Enable DNS SRV Lookups (on
outbound calls)
Enables/disables DNS SRV lookups on calls.
MWI From
When sending MWI NOTIFY requests, this value will be used in the