User manual

FIRMWARE VERSION 1.0.5.15 GXP1100/GXP1105 USER MANUAL Page 26 of 47
STATUS PAGE DEFINITIONS
Status -> Account Status
SIP User ID Displays the configured SIP User ID.
SIP Server Displays the configured SIP Server address.
SIP Registration Displays SIP registration status YES/NO.
Status -> Network Status
MAC Address
Global unique ID of device, in HEX format. The MAC address will be used for
provisioning and can be found on the label coming with original box and on the
label located on the back of the device.
IP Setting DHCP, Static IP or PPPoE.
IPv4 Address The IPv4 address obtained on the phone.
IPv6 Address The IPv6 address obtained on the phone.
Subnet Mask The subnet mask obtained on the phone.
Gateway The gateway address obtained on the phone.
DNS Server 1 The DNS server address 1.
DNS Server 2 The DNS server address 2.
PPPoE Link Up PPPoE connection status.
NAT Traversal NAT traversal status for each account.
Status -> System Info
Product Model Product model of the phone.
Part Number Product part number.
Software Version
• Boot: boot version number;
• Core: core version number;
• Base: base version number;
• Prog: program version number.
This is the main firmware release number,
which is always used for identifying the software system of the phone;
• Aux: Aux version number;
• Dsp: DSP version number.
System Up Time System up time since the last reboot.
System Time Current system time on the phone system.
Service Status GUI and Phone service status.
Core Dump Core dump file that could be downloaded for troubleshooting purpose.