User manual

FIRMWARE VERSION 1.0.5.15 GXP1100/GXP1105 USER MANUAL Page 27 of 47
ACCOUNT PAGE DEFINITIONS
Account x -> General Settings
Account Active Activates/deactivates account. The default setting is "Yes".
Account Name The name associated with the SIP account.
SIP Server
The URL or IP address, and port of the SIP server. This is provided by your
VoIP service provider (ITSP).
Secondary SIP Server
The URL or IP address, and port of the SIP server. This will be used when the
primary SIP server fails.
Outbound Proxy
IP address or Domain name of the Primary Outbound Proxy, Media Gateway,
or Session Border Controller. It's used by the phone for Firewall or NAT
penetration in different networ
k environments. If a symmetric NAT is detected,
STUN will not work and ONLY an Outbound Proxy can provide a solution.
SIP User ID
User account information, provided by your VoIP service provider (ITSP). It's
usually in the form of digits similar to phone
number or actually a phone
number.
Authenticate ID
SIP service subscriber's Authenticate ID used for authentication. It can be
identical to or different from the SIP User ID.
Authenticate Password
The account password required for the phone to authentica
te with the ITSP
(SIP) server before the account can be registered. After it is saved, this will
appear as hidden for security purpose.
Name
The SIP server subscriber's name (optional) that will be used for Caller ID
display.
Voice Mail User ID
Allows yo
u to access voice messages by pressing the MESSAGE button on
the phone. This ID is usually the VM portal access number. For example, in
Asterisk server, 8500 could be used.
Account x -> Network Settings
DNS Mode
This parameter controls how the Search Appliance looks up IP addresses for
hostnames. There are four modes: A Record, SRV, NATPTR/SRV
, Use
Configured IP
. The default setting is "A Record". If the user wishes to locate
the server by DNS SRV, the user may select "SRV" or "NATPTR/SRV". If "Use
Configured IP" is selected, please fill in the three fields below:
• Primary IP
: The primary IP address where the phone sends DNS query
to;
• Backup IP 1;
• Backup IP 2.
NAT Traversal
This parameter configures whether the NAT traversal mechanism is activated.
Users could select the mechanism from No, STUN, Keep-Alive, UPnP, Auto or