User's Manual
Table Of Contents
- Welcome
- Installation
- Product Overview
- Using the GXP1450 SIP Enterprise Phone
- Figure 1: GXP1450 Keypad Layout
- /
- Table 9: GXP1450 Keypad Buttons
- Figure 2: Keypad GUI Flow
- Software Upgrade & Customization
- Restore Factory Default Setting
Grandstream Networks, Inc. GXP1450 User Manual Page 23 of 40
Firmware 1.0.1.83 Last Updated: 08/2011
Table 12: Device Configuration - Status
MAC Address
The device ID, in HEXADECIMAL format.
IP Address
This field shows IP address of GXP1450.
Product Model
This field contains the product model information.
Part Number
This field contains the product part number.
Software Version
• Prog: This is the main firmware release number, which is always used for identifying
the software (or firmware) system of the phone.
• Boot: Booting code version number
• Core: Core code version number
• Base: Base code version number
• DSP: DSP code version number
• Aux: Aux code version number
System Up Time
This field shows system up time since the last reboot.
System Time
This field shows the current time on the phone system.
Registered
Indicates whether accounts are registered to the related SIP server.
PPPoE Link Up
Indicates whether the PPPoE connection is enabled (connected to a modem).
Service Status
• GUI: shows the GUI status: running or stopped
• Phone: shows the phone status: running or stopped
Core Dump
Download core dump file for troubleshooting when necessary.
Table 13: Device Configuration – Settings/Basic Settings
End User Password
This contains the password to access the Web Configuration Menu. This field is case
sensitive with a maximum length of 25 characters.
IP Address
The GXP1450 operates in three modes:
1. DHCP mode
: The GXP1450 acquires its IP address from the first DHCP
server it discovers on its LAN. The DHCP option is reserved for NAT router
mode. In DHCP mode, all the field values for the Static IP mode are not us
ed
(even though they are still saved in the Flash memory).
2. PPPoE mode: To use the PPPoE feature, set the PPPoE account settings
(PPPoE account ID, PPPoE password and PPPoE service name). The
GXP1450 establishes a PPPoE session if any of the PPPoE fields is set.
3. Static IP mode: Configure all of the following fields: IP address, Subnet
Mask, Gateway, DNS Server 1, DNS Server 2 and Preferred DNS Server.