Grandstream Networks, Inc.
GXP2130/GXP2140/GXP2160 User Manual Index GUI INTERFACE EXAMPLES .................................................................... 6 GNU GPL INFORMATION .......................................................................... 7 CHANGE LOG ........................................................................................... 8 FIRMWARE VERSION 1.0.1.14 ............................................................................................................ 8 WELCOME ............................
4-WAY/ 5-WAY CONFERENCING ............................................................................................... 34 VOICE MESSAGES (MESSAGE WAITING INDICATOR) ........................................................... 36 SHARED CALL APPEARANCE (SCA) ........................................................................................ 36 CALL FEATURES ................................................................................................................................
Table of Tables GXP2130/GXP2140/GXP2160 User Manual Table 1: GXP2130 /GXP2140/GXP2160 FEATURES IN A GLANCE ......................................................... 10 Table 2: GXP2130/ /GXP2140/GXP2160 COMPARISON GUIDE .............................................................. 11 Table 3 GXP2130 TECHNICAL SPECIFICATIONS .................................................................................... 11 Table 4: GXP2140 TECHNICAL SPECIFICATIONS .......................................................
GXP2130/GXP2140/GXP2160 User Manual Figure 1: GXP2140 Back View with GXP2200EXT .................................................................................... 18 Figure 2: GXP2130 Idle Screen .................................................................................................................. 20 Figure 3: GXP2140 Idle Screen .................................................................................................................. 20 Figure 4: GXP2160 Idle Screen ..................
GUI INTERFACE EXAMPLES http://www.grandstream.com/products/gxp_series/general/documents/gxp2140_2160_gui.zip 1. Screenshot of Login Page 2. Screenshots of Status Pages 3. Screenshots of Accounts Pages 4. Screenshots of Settings Pages 5. Screenshots of Network Pages 6. Screenshots of Maintenance Pages 7. Screenshots of Phonebook Pages FIRMWARE VERSION 1.0.1.
GNU GPL INFORMATION GXP2130/GXP2140/GXP2160 firmware contains third-party software licensed under the GNU General Public License (GPL). Grandstream uses software under the specific terms of the GPL. Please see the GNU General Public License (GPL) for the exact terms and conditions of the license. Grandstream GNU GPL related source code can be downloaded from Grandstream web site from: http://www.grandstream.com/support/faq/gnu_gpl. FIRMWARE VERSION 1.0.1.
CHANGE LOG This section documents significant changes from previous versions of user manuals for GXP2130/GXP2140/GXP2160. Only major new features or major document updates are listed here. Minor updates for corrections or editing are not documented here. FIRMWARE VERSION 1.0.1.14 This is the initial version. FIRMWARE VERSION 1.0.1.
WELCOME Thank you for purchasing Grandstream GXP2130/GXP2140/GXP2160 Enterprise IP Phone. GXP2130/GXP2140/GXP2160 is a next generation enterprise grade IP phone. GXP2140/GXP2160 features 4.3 inch TFT Color LCD, 5 programmable context-sensitive soft keys, dual Gigabit network ports, integrated PoE and Bluetooth, 5-way conference, and Electronic Hook Switch (EHS). GXP2130 supports 2.8 inch TFT Color LCD, 4 programmable context-sensitive soft keys, 4-way conference and EHS with Plantronics headsets.
PRODUCT OVERVIEW FEATURE HIGHTLIGHTS Table 1: GXP2130 /GXP2140/GXP2160 FEATURES IN A GLANCE GXP2130 GXP2140 GXP2160 FIRMWARE VERSION 1.0.1.14 3 lines 2.8 inch (320x240) TFT color LCD 4 programmable soft keys 8 programmable Multi Purpose Keys 5-way conference 4 lines 4.3 inch (480x272) TFT color LCD 5 programmable soft keys Bluetooth V2.1 5-way conference Expansion board 6 lines 4.
Table 2: GXP2130/ /GXP2140/GXP2160 COMPARISON GUIDE Features LCD Display LCD Backlight Number of Lines Programmabl e Hard Keys Programmabl e Soft Keys Extension GXP2130 GXP2140 GXP2160 320x240 480 x 272 480 x 272 Yes Yes Yes 3 4 6 8 N/A 24 4 5 5 N/A Module Yes, N/A up to 4 EXT Boards, GXP2130/GXP2140/GXP2160 TECHNICAL SPECIFICATIONS Table 3 GXP2130 TECHNICAL SPECIFICATIONS Protocols/Standards SIP RFC3261, TCP/IP/UDP, RTP/RTCP, HTTP/HTTPS, ARP, ICMP, DNS (A record, SRV, NAPTR), DH
Telephony Features Hold, transfer, forward, 5-way conference, call park, call pickup, shared-call-appearance (SCA)/bridged-line-appearance (BLA), downloadable phonebook (XML, LDAP, up to 2000 items), call waiting, call log (up to 500 records), customization of screen, off-hook auto dial, auto answer, click-to-dial, flexible dial plan, hot desking, personalized music ringtones and music on hold, server redundancy and fail-over Sample Applications Weather, currency, GMI available for advanced custom applic
MUTE, SEND/REDIAL, SPEAKERPHONE, VOL+, VOLVoice Codec Support for G.729A/B, G.711µ/a-law, G.726, G.
EN60950-1, AS/NZS CISPR22 Class B Table 5: GXP2160 TECHNICAL SPECIFICATIONS Protocols/Standards SIP RFC3261, TCP/IP/UDP, RTP/RTCP, HTTP/HTTPS, ARP, ICMP, DNS (A record, SRV, NAPTR), DHCP, PPPoE, SSH, TFTP, NTP, STUN, SIMPLE, LLDP, LDAP, TR-069, 802.1x, TLS, SRTP, IPv6 Network Interfaces Dual switched auto-sensing 10/100/1000 Mbps Gigabit Ethernet ports with integrated PoE Graphic Display 4.3 inch (480x272) TFT color LCD Bluetooth Yes, Bluetooth V2.
Energy Efficiency Input:100-240V ; Output: +12V, 1A ; Integrated Power-over-Ethernet (802.3af) Max power consumption:6W Physical Dimention: 222mm (W) x 210mm (L) x 93mm (H); Unit weight: 0.98kg; Package weight: 1.
INSTALLATION EQUIPMENT PACKAGING Table 6: GXP2130/GXP2140/GXP2160 EQUIPMENT PACKAGING Main Case Yes 1 Handset Yes 1 Phone Cord Yes 1 Power Adaptor Yes 1 Ethernet Cable Yes 1 Phone Stand Yes 1 Wall Mount Yes 1 Quick Start Guide Yes 1 CONNECTING YOUR PHONE Table 7: GXP2130/GXP2140/GXP2160 CONNECTORS Handset Port RJ9 handset connector port Headset Port RJ9 headset connector port (supporting EHS with Plantronics headset) USB Port USB port connecting a USB flash drive.
6. Using the keypad configuration menu or phone's embedded web server (Web GUI) by entering the IP address in web browser, you can further configure the phone. GXP2200EXT MODULE The GXP2140 is expandable with GXP2200EXT modules. GXP2140 supports up to 4 extension modules, adding 160 fully programmable phone extensions to the phone.
6. After successfully booting up, the GXP2200EXT board will stay in idle. Press and hold the Left button for 3 to 5 seconds to check the version information and status. Figure 1: GXP2140 Back View with GXP2200EXT The GXP2200EXT board can be configured via the web GUI of the GXP2140 connected. After successfully configured, press Left or Right button on the GXP2200EXT board and users could browse all the MPK's status in different pages.
before the product is returned. Grandstream reserves the right to remedy warranty policy without prior notification. Warning: Use the power adapter provided with the phone. Do not use a different power adapter as this may damage the phone. This type of damage is not covered under warranty. FIRMWARE VERSION 1.0.1.
GETTING TO KNOW GXP2130/GXP2140/GXP2160 IDLE SCREEN GXP2130/GXP2140/GXP2160 screen displays differently depending on whether the phone is idle or in use (active). The following figures show the idle screen of GXP2130/GXP2140/GXP2160. Figure 2: GXP2130 Idle Screen Figure 3: GXP2140 Idle Screen FIRMWARE VERSION 1.0.1.
Figure 4: GXP2160 Idle Screen The following table describes the items displayed on the GXP2130/GXP2140/GXP2160 idle screen. Table 9: LCD DISPLAY DEFINITIONS DATE AND TIME NETWORK ICON STATUS ICON LINE STATUS INDICATOR Displays the current date and time. It can be synchronized with Internet time servers. Shows the status of network. It will indicate whether the network is down or starting.
phone. MissedCalls Shows up unanswered calls to this phone. Redial Redials the last dialed number when there is existed dialed call log. Note: If XML application is used for GXP2130/GXP2140/GXP2160, the softkey for XML application will show up in the default idle screen as configured. The softkeys are context sensitive and will change depending on the call status of the phone. Here are the main softkeys in call screen.
press Split to quit transfer and go back to normal talking status. ConfCall Conferences the active calls. ReConf Re-establish the conference among the calls on hold. Call Parking: Please refer to UCM61xx Online User Manual for more SPECIAL SOFTKEYS information. (Only for GXP2130/GXP2140/GXP2160 when integrated with UCM61xx) CallPark When the phone dials out, the Call Park softkey will display on screen.
OFF - Call Forward All and Call Forward No Answer feature disabled ON - Call Forward All and Call Forward No Answer feature enabled Missed Call Status. OFF - No missed call ON - New missed call Handset Status. OFF - Handset is not in use ON - Handset is in use Headset Status. OFF - Headset is not in use ON - Headset is in use Microphone MUTE Status. OFF - No muted ON - Muted Bluetooth Status. (GX2140/GXP2160) OFF - Bluetooth is off ON - Bluetooth is on USB Status.
ON - Call connected Call Conference. OFF - No Conference call ON - Conference call is established Click Hand In call screen, this icon shows on the line available for transfer or conference. IP Call Status The current call is an IP call. SIP Call Enter number for initiate call. The current call is a SIP call. Call Time During an active call, this icon shows the call time. LCD Brightness Up Brightness is increasing LCD Brightness Down Brightness is decreasing Speaker Volume Up Call screen icon.
Ringtone Volume Up Call screen icon. The volume of ringtone is increasing Ringtone Volume Down Call screen icon. The volume of ringtone is decreasing VOC status Call screen icon. OFF - VOC is off. ON - VOC is on. USING THE KEYPAD Figure 5: GXP2130 Keyboard FIRMWARE VERSION 1.0.1.
Figure 6: GXP2140 Keyboard Figure 7: GXP2160 Keyboard Table 11: GXP2130/GXP2140/GXP2160 Keypad Buttons Contacts. Press to view and edit contact information. Hold. Press to put call on hold or resume the call. Mute. Press to mute or unmute the call. Headset. Press to switch to headset mode. Message. Press to view voicemail messages. FIRMWARE VERSION 1.0.1.
Transfer. Press to transfer call. Conference. Press to conference call. Speaker. Send/Redial. Volume. Up Navigation key. In idle screen, press to see the IP. MAKING PHONE CALLS HANDSET, SPEAKER AND HEADSET MODE The GXP2130/GXP2140/GXP2160 allows users to switch among handset, speaker or headset when making calls. Press the Hook Switch to switch to handset; press the Headset button to switch to headset; or press the Speaker button to switch to speaker.
COMPLETING CALLS There are several ways to complete a call. On hook dialing. Enter the number when the phone is on hook and then send out. When the phone is in idle, enter the number to be dialed out; Take handset off hook; or Press Speaker button; or Press Headset button with headset plugged in; or Select an available LINE key; The call will be dialed out. Off hook and dial. Off hook the phone, enter the number and send out.
Via Phonebook. Dial the number from the phonebook. Press Contacts button; Under Contacts, enter Local Phonebook/ Broadsoft Phonebook using the navigation arrow key; Select the contact you would like to call using the navigation arrow key; Press SEND button to dial the selected contact. Speed Dial from Line Key. Dial the number configured as Speed Dial on Line Key. Go to phone's Web GUI->Settings->Programmable Keys, configure the Line Key's Key Mode as Speed Dial.
For Paging/Intercom, if the SIP Server/PBX supports the feature and has Paging/Intercom feature code set up already, users do not necessarily need toggle to paging mode in the call screen. Simply dial the feature code with extension as a normal call. When dial out via paging, user can see the “call-info” header contains “answer-after=0” and “the “alert-info” header contains “info=alert-autoanswer;delay=0” in the outgoing INVITE.
To enable Quick IP Call Mode, go to phone's Web GUI->Settings->Call Features, set "Use Quick IP Call Mode" to "Yes". Clicking on "Save and Apply" on the bottom of Web GUI page to take the change. To make Quick IP Call, take the phone off hook first. Then dial #xxx where x is 0-9 and xxx<255. Press # or SEND and a direct IP call to aaa.bbb.ccc.XXX will be completed. "aaa.bbb.ccc" is from the local IP address regardless of subnet mask. The number #xx or #x are also valid.
When Do Not Disturb feature is turned on, the DND icon will appear on the top of the LCD. The incoming call will not be accepted or the call will directly go into voicemail. DURING A PHONE CALL CALL WAITING/CALL HOLD Hold. Place a call on hold by pressing the HOLD button. The active LINE key will blink in green; Resume. Resume call by pressing the blinking LINE key; Multiple calls. Automatically place active call on hold or switch between calls by pressing the LINE key.
Auto-Attended Transfer. Set "Auto-Attended Transfer" to "Yes" under Web GUI->Settings->Call Features. And then click "Save and Apply" on the bottom of the page; Establish one call first; During the call, press TRAN key. A new line will be brought up and the first call will be automatically placed on hold; Dial the number and press SEND or # to make a second call. (Once the number is entered, a "Transfer" soft key will show.
current active LINE key (LED in solid green); This will resume the 2-way conversation with the current line. Split and Re-conference. During the conference, press HOLD key.
ReConf softkey right after the conference call is split. Cancel Conference. If users decides not to conference after establishing the second call, press EndCall softkey instead of the ConfCall softkey/CONF key; This will end the second call and the screen will show the first call on hold. End Conference. Press HOLD key to split the conference call.
All the users that belong to the same SCA group will be notified by visual indicator when a user seizes the line and places an outgoing call, and all the users of this group will not be able to seize the line until the line goes back to an idle state or when the call is placed on hold (with the exception of when multiple call appearances are enabled on the server side). In the middle of the conversation, there are two types of hold: Public Hold and Private Hold.
Call with Caller ID Blocked (per call) *67 Off hook the phone; Dial *67 and then enter the number to dial out. Call with Caller ID Enabled (per call) *82 Off hook the phone; Dial *82 and then enter the number to dial out. Call with Call Waiting Disable (per Call) *70 Off hook the phone; Dial *70 and then enter the number to dial out. Call with Call Waiting Enabled (per Call) *71 Off hook the phone; Dial *71 and then enter the number to dial out.
Dial *92 and then enter the number to forward the call; Press OK softkey or SEND key. Cancel Delayed Call Forward. To cancel the delayed call forward: *93 Off hook the phone; Dial *93; Hang up the call. FIRMWARE VERSION 1.0.1.
CONFIGURATION GUIDE The GXP2130/GXP2140/GXP2160 can be configured via two ways: LCD Configuration Menu using the phone's keypad; Web GUI embedded on the phone using PC's web browser. CONFIGURATION VIA KEYPAD To configure the LCD menu using phone's keypad, follow the instructions below: Enter MENU options. When the phone is in idle, press the round MENU button to enter the configuration menu; Navigate in the menu options.
Status Displays account status, network status, software version number and Hardware Account status. Network status. Press to enter the sub menu for IP setting information (DHCP/Static IP/PPPoE), IPv4 address, IPv6 address, Subnet Mask, Gateway and DNS server. Software Version Press to enter the sub menu for Boot, Core, Base and Prog version. Hardware Press to enter the sub menu for MAC address, Hardware version and P/N number.
Adjusts ring volume by pressing left/right arrow key. Appearance o Active LCD Brightness Adjusts active LCD brightness by pressing left/right arrow key o Idle LCD Brightness Adjusts idle LCD brightness by pressing left/right arrow key o Display Language Selects the language to be displayed on the phone's LCD. Users could select Automatic for local language based on IP location if available. Time Settings Configures date and time on the phone.
o Start Scan Starts to scan other Bluetooth devices around the phone. If found, user could press “Pair” soft key, and enter Pin code to pair to other Bluetooth devices. o Discoverable Defines if the phone is discoverable by other Bluetooth devices. o MAC Displays the MAC address of the phone. Upgrade o Firmware Server Configures firmware server for upgrading the phone. o Config Server Configures config server for provisioning the phone. o Upgrade Via Specifies upgrade/provisioning via TFTP/HTTP/HTTPS.
Detect/connect UCM server to process auto-provision. Manually input the IP and port of the UCM server phone wants to bind with; Or select from the available UCM server in network. Operations o Factory Reset Resets the phone to factory default settings. Reboot Reboots the phone. The following picture shows the keypad MENU configuration flow. FIRMWARE VERSION 1.0.1.
MENU Call History Status Contacts Account Status Network Status System information Hardware Local Phonebook Local Group Broadsoft Phonebook LDAP Directory Messages Instant Messages Voice Mails Preference Do Not Disturb Star Key Lock Sounds Appearance Time Settings Phone System SIP Call Features Network Bluetooth Upgrade Factory Functions UCM Detect Factory Reset Reboot Enable/Disable Password Ring Tone Ring Volume Active LCD Brightness Idle LCD Brightness Display Language IP Settins 802.
CONFIGURATION VIA WEB BROWSER The GXP2130/GXP2140/GXP2160 embedded Web server responds to HTTP/HTTPS GET/POST requests. Embedded HTML pages allow a user to configure the IP phone through a Web browser such as Google Chrome, Mozilla Firefox and Microsoft’s IE. To access the Web GUI: 1. Connect the computer to the same network as the phone; 2. Make sure the phone is turned on and shows its IP address. You may check the IP address by pressing Up arrow button when phone is at idle state; 3.
DEFINITIONS This section describes the options in the phone's Web GUI. As mentioned, you can log in as an administrator or an end user. Status: Displays the Account status, Network status, and System Info of the phone; Account: To configure the SIP account; Settings: To configure call features, ring tone, audio control, LCD display, date and time, Web services, XML applications, programmable keys and etc.
Status -> System Info Product Model Product model of the phone. Part Number Product part number. Software Version Boot: boot version number; Core: core version number; Base: base version number; Prog: program version number. This is the main firmware release number, which is always used for identifying the software system of the phone; Aux: Aux version number; Dsp: DSP version number. System Up Time System up time since the last reboot.
appear as hidden for security purpose. Name The SIP server subscriber's name (optional) that will be used for Caller ID display. Allows you to access voice messages by pressing the MESSAGE button on Voice Mail User ID the phone. This ID is usually the VM portal access number. For example, in Asterisk server, 8500 could be used. Account x -> Network Settings This parameter controls how the Search Appliance looks up IP addresses for hostnames.
number. If set to "Enable", "Tel:" will be used instead of "SIP:" in the SIP request. The default setting is "Disable". SIP Registration Selects whether or not the phone will send SIP Register messages to the proxy/server. The default setting is "Yes". If set to "Yes", the SIP user's registration information will be cleared when the Unregister On Reboot phone reboots. The SIP Contact header will contain "*" to notify the server to unbind the connection. The default setting is "No".
order to support PSTN internetworking. To invoke a reliable provisional response, the 100rel tag is appended to the value of the required header of the initial signaling messages. When set to "Auto", the phone will look for the caller ID in the order of P-Asserted Identity Header, Remote-Party-ID Header and From Header in the Caller ID Display incoming SIP INVITE. When set to "Disabled", all incoming calls are displayed with "Unavailable".
this "eventlist BLF URI" field, fill in the URI without the domain (i.e., BLF1006). To monitor the extensions in the list, under Web GUI->Settings->Programmable Keys page, please select "eventlist BLF" in the key mode, choose account, enter the value of each extension in the list. Conference URI Music On Hold URI BLF Call-pickup Prefix PUBLISH for Presence Omit charset=UTF-8 in MESSAGE Configures the conference URI when using Broadsoft N-way calling feature.
a session timer when it receives inbound calls. If Force Timer is set to "Yes", the phone will use the session timer even if the Force Timer remote party does not support this feature. If Force Timer is set to "No", the phone will enable the session timer only when the remote party supports this feature. To turn off the session timer, select "No".
"Disabled". Symmetric RTP Defines whether symmetric RTP is supported or not. The default setting is "No". Controls the silence suppression/VAD feature of the audio codec G.729. If set Silence Suppression to "Yes", when silence is detected, a small quantity of VAD packets (instead of audio packets) will be sent during the period of no talking. If set to "No", this feature is disabled. The default setting is "No". Configures the number of voice frames transmitted per packet.
Allow 311, 611, and 911 or any 10 digit numbers with leading digits 1617; Example 2: {^1900x+ | <=1617>xxxxxxx} Block any number of leading digits 1900 or add prefix 1617 for any dialed 7 digit numbers; Example 3: {1xxx[2-9]xxxxxx | <2=011>x+} Allows any number with leading digit 1 followed by a 3 digit number, followed by any number between 2 and 9, followed by any 7 digit number OR Allows any length of numbers with leading digit 2, replacing the 2 with 011 when dialed.
different ringtones from the dropdown menu. Specifies matching rules with number, pattern or Alert Info text. When the incoming caller ID or Alert Info matches the rule, the phone will ring with selected distinctive ringtone. Matching rules: Specific caller ID number. For example, 8321123; A defined pattern with certain length using x and + to specify, where x could be any digit from 0 to 9.
No Key Entry Timeout (s) Defines the timeout (in seconds) for no key entry. If no key is pressed after the timeout, the digits will be sent out. The default value is 4 seconds. Allows users to configure the "#" key as the "Send" key. If set to "Yes", the "#" Use # as Dial Key key will immediately dial out the input digits. In this case, this key is essentially equivalent to the "Send" key. If set to "No", the "#" key is included as part of the dialing string.
have the IP address of the phone displayed. Settings -> Call Features Configures a User ID/extension to dial automatically when the phone is Off-hook Auto Dial off hook. The phone will use the first account to dial out. The default setting is "No". Off-hook Timeout Disable Call Waiting Disable Call Waiting Tone Disable Direct IP Call If configured, when the phone is on hook, it will go off hook after the timeout (in seconds). The default value is 30 seconds. Disables the call waiting feature.
Configures ring or tone frequencies based on parameters from local Call Progresses Tones: System Ring Tone Dial Tone Message Waiting Ring Back Tone Call-Waiting Tone Busy Tone Reorder Tone telecom. The default value is North American standard. Frequencies should be configured with known values to avoid uncomfortable high pitch sounds.
Configures to enable or disable the speaker to ring when headset is used Always Ring Speaker on "Toggle Headset/Speaker" mode. If set to "Yes", when the phone is in Headset "Toggle Headset/Speaker" mode, both headset and speaker will ring on incoming call. The default setting is "No". Headset TX gain Headset RX gain Handset TX gain Configures the transmission gain of the headset. The default value is 0dB. Configures the receiving gain of the headset. The default value is 0dB.
Tues, ... ,Sat) Therefore, this example is the DST which starts from the First Sunday of April to the 1st Sunday of November. Configures the date display format on the LCD. The following formats are supported: Date Display Format Time Display Format yyyy-mm-dd: 2012-07-02 mm-dd-yyyy: 07-02-2012 dd-mm-yyyy: 02-07-2012 dddd, MMMM dd: Friday, October 12 MMMM dd, dddd: October 12, Friday Configures the time display in 12-hour or 24-hour format on the LCD.
are: Line Regular line key to open up a line and switch line. The Value field can be left blank. Shared Line Share line for Shared Line Appearance feature. Select the Account registered as Shared line for the line key. The Value field can be left blank. Speed Dial Select the Account to dial from. And enter the Speed Dial number in the Value field to be dialed. Busy Lamp Field (BLF) Select the Account to monitor the BLF status. Enter the extension number in the Value field to be monitored.
Select Account, and enter the call park extension in the Value field to park/pick up the call. Intercom Select Account, and enter the extension number in the Value field to do the intercom. LDAP Search This option is to narrow the LDAP search scope. Enter the LDAP search base in the Name field. It could be the same or different from the Base in LDAP configuration under Advanced Settings. The Base in LDAP configuration will be used if the Name field is left blank.
The last answered calls can be dialed out by using Call Return. The Value field should be left blank. Also, this option is not binding to the account and the call will be returned based on the account with the last answered call. Transfer Select Account, and enter the number in the Value field to be transferred (blind transfer) during the call. Call Park Select Account, and enter the call park extension in the Value field to park/pick up the call.
Gateway Enter the Default Gateway when static IP is used for IPv4. DNS Server 1 Enter the DNS Server 1 when static IP is used for IPv4. DNS Server 2 Enter the DNS Server 2 when static IP is used for IPv4. Preferred DNS Server Enter the Preferred DNS Server for IPv4. Allows users to configure the appropriate network settings on the phone to IPv6 Address Type obtain IPv6 address. Users could select "Auto-configured" or "Statically configured" for the IPv6 address type.
Configures the PC port mode. When set to "Mirrored", the traffic in the LAN PC Port Mode port will go through PC port as well and packets can be captured by connecting a PC to the PC port. The default setting is "Enable". Enable LLDP Control the LLDP(Link Layer Discovery Protocol) service. MAINTENANCE PAGE DEFINITIONS Table 18: Maintenance Page Definitions Maintenance -> Web Access End User Password Set new password for web GUI access as User. This field is case sensitive.
with the matching prefix will be downloaded. This field enables user to store different configuration files in one single Config File Postfix directory on the configuration server. If configured, only the configuration file with the matching postfix will be downloaded. Allow DHCP Option 43 and Option 66 Override Server If DHCP option 43 or 66 is enabled on the LAN side, the TFTP server can be redirected. The default setting is "Yes".
Maintenance -> TR-069 Enable TR-069 Enables TR-069. The default setting is "No". ACS URL URL for TR-069 Auto Configuration Servers (ACS). TR-069 Username ACS username for TR-069. TR-069 Password ACS password for TR-069. Periodic Inform Enable Periodic Inform Interval Connection Request Username Connection Request Password Enables periodic inform. If set to "Yes", device will send inform packets to the ACS. The default setting is "No".
Configuration Web Access Mode Sets the protocol for web interface. Disable SSH Disables SSH access. Specifies the time in minutes that the web or LCD login interface will be locked Web/Keypad/Restrict out to user after five login failures. This lockout time is used for web login, mode Lockout Duration STAR keypad unlock and LCD restrict mode admin login. Range is 0-60 minutes.
Port Configures the LDAP server port. Configures the LDAP search base. This is the location in the directory where the search is requested to begin. Base Example: dc=grandstream, dc=com ou=Boston, dc=grandstream, dc=com User Name Password Configures the bind "Username" for querying LDAP servers. Some LDAP servers allow anonymous binds in which case the setting can be left blank. Configures the bind "Password" for querying LDAP servers.
Example: telephoneNumber telephoneNumber Mobile Configures the entry information to be shown on phone's LCD. Up to 3 fields LDAP Display Name can be displayed. Example: %cn %sn %telephoneNumber Max. Hits Search Timeout Sort Results LDAP Lookup Specifies the maximum number of results to be returned by the LDAP server. If set to 0, server will return all search results. The default setting is 50.
If the devices are kept within a private network behind a firewall, we recommend using STUN Server. The following settings are useful in the STUN Server scenario: STUN Server Under Settings->General Settings, enter a STUN Server IP (or FQDN) that you may have, or look up a free public STUN Server on the internet and enter it on this field. If using Public IP, keep this field blank. Use Random Ports It is under Settings->General Settings. This setting depends on your network settings.
Figure 9: Web Service By default the City Code is set to "Automatic", which allows the phone to obtain weather information based on the IP location detected. To use "Self-Defined City Code" option, please follow the steps below to obtain the correct city code: In a web browser, go to www.weather.com; Enter the city name in the search field. For example, Boston, MA. And click on "SEARCH"; The searching result will show in a new window with URL in the browser's address bar.
Under Web GUI->Settings->General Settings, set "Public Mode" option to "Yes". Click "Save and Apply" and reboot the phone; When the phone boots up, SIP User ID and Password to register to the configured SIP server in account 1 will be required. Enter the correct account information to log in to the phone.
password=admin/123: The admin login password or user login password of phone's Web GUI. Click to dial from Add contacts. available lines. Click to call this Edit contact. contact from the phone. Figure 10: Web GUI - Phonebook->Contacts Figure 11: Click-to-Dial SAVING THE CONFIGURATION CHANGES After users makes changes to the configuration, press the "Save" button will save but not apply the changes until the "Apply" button on the top of web GUI page is clicked.
"Save and Apply" button. We recommend rebooting or powering cycle the phone after applying all the changes. REBOOTING FROM REMOTE LOCATIONS Press the "Reboot" button on the top right corner of the web GUI page to reboot the phone remotely. The web browser will then display a reboot message. Wait for about 1 minute to log in again. FIRMWARE VERSION 1.0.1.
CONNECTING TO DEVICES The GXP2130/GXP2140/GXP2160 supports EHS headset (Plantronics). GXP2140/2160 is also capable to connect to USB and Bluetooth devices. EHS HEADSET The GXP2130/GXP2140/GXP2160 supports normal RJ11 headset and Plantronics EHS headset. To use Plantronics EHS headset, go to the GXP2130/GXP2140/GXP2160 web GUI->Settings->Audio Control: Headset Type. Select "Plantronics EHS" and reboot the phone to take effect. 1. Connect EHS Headset (Plantronics) to GXP2130/GXP2140/GXP2160.
3. When the Power option is highlighted, pressing menu round button to turn on/off Bluetooth. PAIRING GXP2140/GXP2160 WITH A BLUETOOTH DEVICE Before connecting GXP2140/GXP2160 with other Bluetooth device, users must pair them first. They will stay paired afterwards unless they are unpaired. 1. Go to GXP2140/GXP2160's LCD menu->System->Bluetooth; 2. Enter Start Scan option; 3. The GXP2140/GXP2160 scans and displays the IDs of all available Bluetooth devices in range.
UPGRADING AND PROVISIONING The GXP2130/GXP2140/GXP2160 can be upgraded via TFTP/HTTP/HTTPS by configuring the URL/IP Address for the TFTP/HTTP/HTTPS server and selecting a download method. Configure a valid URL for TFTP or HTTP/HTTPS; the server name can be FQDN or IP address. Examples of valid URLs: firmware.grandstream.com fw.ipvideotalk.com/gs There are two ways to setup a software upgrade server: The LCD Keypad Menu or the Web Configuration Interface.
When upgrading starts, the screen will show upgrading progress. When done you will see the phone restart again. Please do not interrupt or power cycle the phone when the upgrading process is on. Firmware upgrading takes around 60 seconds in a controlled LAN or 5-10 minutes over the Internet. We recommend completing firmware upgrades in a controlled LAN environment whenever possible.
A configuration parameter is associated with each particular field in the web configuration page. A parameter consists of a Capital letter P and 2 to 3 (Could be extended to 4 in the future) digit numeric numbers. i.e., P2 is associated with the "New Password" in the Web GUI->Maintenance->Web Access page->Admin Password. For a detailed parameter list, please refer to the corresponding firmware release configuration template.
RESTORE FACTORY DEFAULT SETTINGS Warning: Restoring the Factory Default Settings will delete all configuration information on the phone. Please backup or print all the settings before you restore to the factory default settings. Grandstream is not responsible for restoring lost parameters and cannot connect your device to your VoIP service provider.
EXPERIENCING THE GXP2130/GXP2140/GXP2160 Please visit our website: http://www.grandstream.com to receive the most up- to-date updates on firmware releases, additional features, FAQs, documentation and news on new products. We encourage you to browse our product related documentation, FAQs and User and Developer Forum for answers to your general questions. If you have purchased our products through a Grandstream Certified Partner or Reseller, please contact them directly for immediate support.
FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
