User's Manual

FIRMWARE VERSION 1.0.1.14 GXP2130/GXP2140/GXP2160 USER MANUAL Page 51 of 84
order to support PSTN internetworking. To invoke a reliable provisional
response, the 100rel tag is appended to the value of the required header of the
initial signaling messages.
Caller ID Display
When set to "Auto", the phone will look for the caller ID in the order of
P-Asserted Identity Header, Remote-Party-ID Header and From Header in the
incoming SIP INVITE. When set to "Disabled", all incoming calls are displayed
with "Unavailable". When set to "From Header", the phone will display the
caller ID based on the From Header in the incoming SIP INVITE. The default
setting is "Auto".
Use Privacy Header
Controls whether the Privacy Header will present in the SIP INVITE message
or not. The default setting is "default", which is when "Huawei IMS" special
feature is on, the Privacy Header will not show in INVITE. If set to "Yes", the
Privacy Header will always show in INVITE. If set to "No", the Privacy Header
will not show in INVITE.
Use P-Preferred-Identity
Header
Controls whether the P-Preferred-Identity Header will present in the SIP
INVITE message or not. The default setting is "default", which is when
"Huawei IMS" special feature is on, the P-Preferred-Identity Header will not
show in INVITE. If set to "Yes", the P-Preferred-Identity Header will always
show in INVITE. If set to "No", the P-Preferred-Identity Header will not show in
INVITE.
Account x -> SIP Settings -> Advanced Features
Broadsoft Call Center
When set to "Yes", Feature Key Synchronization will be enabled regardless of
web settings. The default setting is "No".
Hoteling Event
Enables Broadsoft Hoteling event feature. The default setting is "No".
Call Center Status
When set to "Yes", the phone will send SUBSCRIBE to the server to obtain call
center status. The default setting is "No".
Publish to Call Center
When set to "Yes", users could select "Away", "Online" or "Busy" from LCD
menu and publish it to call center. The default setting is "No".
Feature Key
Synchronization
This feature is used for Broadsoft call feature synchronization. When it's
enabled, DND and Call Forward features can be synchronized with Broadsoft
server. The default setting is "Disabled".
Line Seize Timeout
Defines the interval (in seconds) before the line can be seized when Shared
Line is used. The default value is 15 seconds.
Eventlist BLF URI
Configures the eventlist BLF URI on the phone to monitor the extensions in the
list with Multi Purpose Key. If the server supports this feature, users need to
configure an eventlist BLF URI on the service side first (i.e.,
[e-mail]) with a list of extension included. On the phone, in