User's Manual

FIRMWARE VERSION 1.0.1.14 GXP2130/GXP2140/GXP2160 USER MANUAL Page 66 of 84
PC Port Mode
Configures the PC port mode. When set to "Mirrored", the traffic in the LAN
port will go through PC port as well and packets can be captured by
connecting a PC to the PC port. The default setting is "Enable".
Enable LLDP
Control the LLDP(Link Layer Discovery Protocol) service.
MAINTENANCE PAGE DEFINITIONS
Table 18: Maintenance Page Definitions
Maintenance -> Web Access
End User Password
Set new password for web GUI access as User. This field is case sensitive.
Confirm Password
Enter the new User password again to confirm.
Current Admin Password
The current admin password is required for setting a new admin password.
Admin Password
Set new password for web GUI access as Admin. This field is case sensitive.
Confirm Password
Enter the new Admin password again to confirm.
Maintenance -> Upgrade and Provisioning
Firmware Upgrade and
Provisioning
Specifies how firmware upgrading and provisioning request to be sent: Always
Check for New Firmware, Check New Firmware only when F/W pre/suffix
changes, Always Skip the Firmware Check.
XML Config File
Password
The password for encrypting the XML configuration file using OpenSSL. This
is required for the phone to decrypt the encrypted XML configuration file.
HTTP/HTTPS User
Name
The user name for the HTTP/HTTPS server.
HTTP/HTTPS Password
The password for the HTTP/HTTPS server.
Upgrade Via
Allows users to choose the firmware upgrade method: TFTP, HTTP or HTTPS.
Firmware Server Path
Defines the server path for the firmware server. It could be different from the
configuration server for provisioning.
Config Server Path
Defines the server path for provisioning. It could be different from the firmware
server for upgrading.
Firmware File Prefix
This field enables user to store different versions of firmware files in one single
directory on the firmware server. If configured, only the firmware file with the
matching prefix will be downloaded.
Firmware File Postfix
This field enables user to store different versions of firmware files in one single
directory on the firmware server. If configured, only the firmware file with the
matching postfix will be downloaded.
Config File Prefix
This field enables user to store different configuration files in one single
directory on the configuration server. If configured, only the configuration file