User manual

GXV3601 IP Camera
Firmware 1.0.4.6 Page 29 of 36
Grandstream Networks, Inc. 09/2010
files: SD card, USB Flash drive, or USB hard drive.
Voice Alarm to SIP Phone – If this option is selected, the GXV3601 will make calls to the
number listed in the Phone List page using the configured SIP account when an alarm is
triggered. To use this function, the settings in SIP page must be configured properly.
Alarm Output – If this option is selected, the alarm will output via the configured
method/equipment when it is triggered.
Upload to Alarm Center – This option is an integrated feature with GSurf. If this option is
checked, the GXV3601 will report the alarm event to GSurf.
Record Video and Upload to FTP server – If this option is selected, the GXV3601will record
the video and upload it to the FTP server when an alarm is triggered. You must check Record
Video and configure the FTP page properly to use this feature.
Email JPEG and Store it to USB drive or SD card – If this option is selected, the GXV3601
will capture the image and store it to connected live storage device when an alarm is
triggered.
Set up Alarm Event Time Schedule
This section allows you to configure the time during which the GXV3601 will monitor the
Alarm Input. The GXV3601 not only can monitor your settings but also can take actions when
the alarm is triggered.
To add a schedule, select the date from the dropdown list, Start Time and End time and
Click Add to add a new time schedule.
To delete a schedule, check the schedule you would like to remove and click Delete.
How to connect an Alarm Output Equipment to GXV3601
Here is a sample connection diagram. Connect the alarm output equipment to the GXV3601
by following the diagram below.
Available time
schedules
Dropdown list for date