Grandstream Networks, Inc.
GXV3611 Mini IP Dome Camera Safety Instructions These instructions are intended to assist users with the operation of the GXV3611 and also to instruct on how to avoid dangerous situations or damage to the device. Warnings: Serious injury or death may be caused if any of the warnings below are neglected. Cautions: Injury or damage to the equipment may occur if any of the following caution messages are neglected. Warnings Follow these safeguards to prevent serious injury or death.
GXV3611 Mini IP Dome Camera detector alarm system. The smoke detector does not comply with the National Alarm and Signaling Code, nor does it provide any form of visual or audible signal to alert the premises dwellers. You must not replace any existing smoke alarm system with this product. Firmware 1.0.4.6 Grandstream Networks, Inc.
GXV3611 Mini IP Dome Camera Contents Welcome .........................................................................................................................................................5 Package Contents ............................................................................................................................................6 Product Overview .......................................................................................................................................
GXV3611 Mini IP Dome Camera Welcome The GXV3611 is a next generation mini IP dome camera for remote monitoring and surveillance over your LAN or internet. The GXV3611 combines best in class IP video technology and SIP protocols for a robust IP surveillance solution. The product features H.264 video streams with up to 30 frames per second in full D1, delivering rich image clarity at rapid transmission rates.
GXV3611 Mini IP Dome Camera Package Contents Items in the package: • • • GXV3611 IP Camera 12V DC power Adapter Quick installation guide Firmware 1.0.4.6 Grandstream Networks, Inc.
GXV3611 Mini IP Dome Camera Product Overview GXV3611 Overview GXV3611 Side View GXV3611 Sample Connection Diagram Connectors and cables PINs –Alarm In connector, and Alarm out connector. AUDIO IN – 3.5mm port for audio input devices (microphone, pickup and etc.). NETWORK – 10/100 Switch LAN port for connecting to Ethernet. The indicator will be steady for connection and flashing for network activity. AUDIO OUT – 3.5mm port for audio output devices (speakers, and etc.). Firmware 1.0.4.
GXV3611 Mini IP Dome Camera DC 12V – 12V DC power jack; UL Certified. POWER – The indicator will be solid green if the power is on. Ground – wire used for grounding GXV3611 Key Features The table below lists the key features the GXV3611 Supports. Features Image Sensor Lens Type Minimum Illumination Video Compression Max Video Resolution GXV3611-HD GXV3611-LL 1/3.2”, 2-Megapixel CMOS, 1600H 1/4”, CMOS, 680H x 512V x 900V 1/3”, 4.2mm, F1.8, Mega, fixed 1/4”, 4.5m, F 1.
GXV3611 Mini IP Dome Camera Video Bit Rate 20fps for 1600x900, 30fps for 1280 x 720,800x450, 640x360, 480x270, 320x180 32 Kbps – 8 Mbps Video Output N/A Max Frame Rate in Max Resolution 30fps for VGA & NTSC 25fps for PAL 32 Kbps – 2 Mbps 1BNC (voltage1.0Vp-p, resistance75) 3.5mm LINE IN Audio Input 3.5mm LINE OUT Audio Output G.
GXV3611 Mini IP Dome Camera GXV3611 Lens Specification Parameters Lens Mount GXV3611-HD GXV3611-LL M12 Lens Format 1/3” Focal Length Aperture (D/f’) 4.2 mm 1.8 4.5 mm 1.9 View Angle 71 64 Size (Diameter x Length 1 x Length 2) 14x15.8mm 14x12.91mm M12 2 Mega pixels Firmware 1.0.4.6 Grandstream Networks, Inc.
GXV3611 Mini IP Dome Camera Installation Guide Minimum Recommended System Requirement • • • • Windows 2000 Server Professional, Windows XP, Windows Vista. CPU: Intel Pentium 4 or higher, 2 GHz. RAM: 1 GB (4 GB recommended for larger systems). Support for DirectX 8.0 and above. . Connect your GXV3611 Using the Power adapter as power supply • • • • Connect an RJ-45 cable to the NETWORK port of the GXV3611. Connect the other end of the RJ-45 cable to your network or PC.
GXV3611 Mini IP Dome Camera Configuring the GXV3611 via Web Browser The GXV3611’s embedded Web server responds to HTTP/HTTPS GET/POST requests. Embedded HTML pages allow you to configure your IP camera through Microsoft Internet Explorer. Access GXV3611 Web Configuration Menu Connect the Camera to DHCP server. 1. Navigate your browser to: http://www.grandstream.com/support/gxv_series_surveillance/general/resources/gs_ search.zip 2. Run the Grandstream GS_Search tool, that you just downloaded. 3.
GXV3611 Mini IP Dome Camera Connect to the Camera using Static IP. If the camera does not get response from DHCP server after 3 minutes, it can be accessed by the default IP 192.168.1.168. 1. Connect your PC to the same network as the GXV3611. 2. Configure the IP address of your PC to: 192.168.1.XXX (1
GXV3611 Mini IP Dome Camera GXV3611 Home Web Page Figure2: Home web page of GXV3611-LL Figure3: Home web page of GXV3611-HD Firmware 1.0.4.6 Grandstream Networks, Inc.
GXV3611 Mini IP Dome Camera Items on GXV3611 Home Page 1 Motion Detection 2 Alarm Event 3 Smoke Alarm 4 5 6 7 Control Console ZOOM FOCUS Default 8 9 10 11 12 SPEED BRIGHTNESS CONTRAST SATURATION View Size 13 14 Play Capture 15 Record 16 17 18 19 Sound Off/On Talk Playback Config If the motion detection alarm is triggered, the indicator will flash red. Click on the indicator to turn off the alarm. If an alarm event is triggered, the indicator will flash red.
GXV3611 Mini IP Dome Camera Set the System Time Update via NTP Server - the camera will obtain the time from an NTP server Specify the NTP server's IP address or host name. And you can select your time zone from the drop-down list or define your own time zone setting. NOTE: If using a host name for the NTP server, a DNS server must be configured under Basic Settings -> Networking. Synchronize with Local Computer - sets the time from the clock on your computer.
GXV3611 Mini IP Dome Camera Video Settings Preferred Video Codec – The GXV3611 supports the H.264 video codec. Resolution – The higher the resolution is, the better the video quality is, and higher bandwidth is required. Low -----------------------Æ High Resolution QCIF CIF 2CIF D1 Bit Rate – The number of bits that are conveyed or processed per unit of time. Maximum Frame Rate – The video frame rate is adjustable based on network conditions.
GXV3611 Mini IP Dome Camera Audio Compression – Audio compression is a form of data compression designed to reduce the size of audio files. Usually, the higher the audio compression is, the better the audio quality is. Microphone Volume/Speaker Volume – GXV3611 has build in Microphone and Speaker. And this volume can be adjusted here. Line In – Switching between Internal and External microphone. Line Out – Switching between Internal and External speaker.
GXV3611 Mini IP Dome Camera DNS Configuration There are two methods of DNS configuration on the GXV3611: 1. The GXV3611 can obtain the DNS server automatically 2. Users can configure their own preferred DNS server HTTP Port The GXV3611 supports user configured http ports. If the HTTP port is changed, the port number is needed to access the web GUI, for instance: http://192.168.1.168:8080. NOTE: If the HTTP Port is 80, when you add this device to GSurf or GS_NVR, the RTSP port is 554.
GXV3611 Mini IP Dome Camera STUN Server – If the device is behind a router, a STUN server is needed to help penetrate the NAT. 4. Click Save to save the changes. You might need to reboot the device to apply all the changes. GXV3611 SIP Page The GXV3611 has the ability to receive phone calls and make phone calls when an alarm event is triggered through motion detection or alarm input. Register the GXV3611 to a SIP server to enable the product to make and receive phone calls.
GXV3611 Mini IP Dome Camera 5. STUN Server – If the device is behind a router, a STUN server is needed to help penetrate the NAT. Stream – To choose between Primary and Secondary stream. Preferred Vocoder – To choose different Vocoder type. Registration Expiration – This parameter allows users to specify the time frequency (in minutes) in which the GXV refreshes its registration with the specified registrar. The default interval is 60 minutes.
GXV3611 Mini IP Dome Camera NOTE: With current firmware, only the first phone number in the list will be called when an alarm is triggered. GXV3611 Status Page System Statistics System Statistics lists hardware and software information, for example, the part number, the software version, about the GXV3611. Hardware Version – This field contains the product’s hardware information. Part Number – This field contains the product part number information. Bootloader Version – Bootloader code version number.
GXV3611 Mini IP Dome Camera GXV3611 User Management Page All current users will be list in the User List section of this page. You can also add and remove users here. Existing User Name –The field lists all of the current users. You can insert or remove users from the list by click on the Add or Update or Delete button. User Name / Password – The user name and password required to login. Privilege – The privilege for the user to access to configuration page.
GXV3611 Mini IP Dome Camera Automatic Upgrade – The default setting is “No.” Choose “Yes” to enable automatic. HTTP/HTTPS/TFTP upgrade and provisioning. When set to “No”, the IP Camera will only perform a HTTP/HTTPS/TFTP upgrade and perform a configuration check once during the boot process. Performing a firmware upgrade: 1. Download the firmware package from http://www.grandstream.com/firmware.html. 2. Unzip the firmware package and copy the files to the firmware upgrade server directory.
GXV3611 Mini IP Dome Camera Test Email Account Settings – Click the Test button to send a test email from the From E-Mail to the To E-Mail to make sure that SMTP is configured properly. If the receiver can get the test email, then the SMTP settings are ready to go. GXV3611 FTP Page The FTP server is used to store video files if you configure the GXV3611 to record video and upload it to the FTP server when an alarm event or motion detection is triggered.
GXV3611 Mini IP Dome Camera How Alarm Input and Alarm Output Work Alarm-in is the alarm input port; users are able to connect sensors such as infrared sensor, smoke sensor or light sensor to it. The detectable signal voltage range for alarm-in is from 1.8V to 15 V NOTE: Please do not connect a device that has a signal voltage that is higher than 15V, this will damage the IP camera.
GXV3611 Mini IP Dome Camera Record Video – If this option is selected, the GXV3611 will record the video when an alarm is triggered. You can enter the length of the video recording (in seconds). Voice Alarm to SIP Phone – If this option is selected, the GXV3611 will make calls to the number listed in the Phone List page using the configured SIP account when an alarm is triggered. To use this function, the settings in SIP page must be configured properly.
GXV3611 Mini IP Dome Camera How to connect an Alarm Output Equipment to GXV3611 Here is a sample connection diagram. Connect the alarm output equipment to the GXV3611 by following the diagram below. Set up Smoke Alarm Action The smoke alarm action is what the GXV3611 is going to do when build in smoke detector is triggered during the defined time period – the time schedule. The GXV3611 allows multiple alarm actions.
GXV3611 Mini IP Dome Camera GXV3611 Motion Detection Page The GXV3611 supports Motion Detection. To utilize this feature, please follow the below steps: 1. Setup the motion detection monitored area. 2. Configure the motion detection time schedule. 3. Configure alarm action properly. Setup Motion Detection Monitored Area Enable Motion Detection – If this option is selected, motion detection will be enabled. If something/somebody moves in the motion detection region, an alarm will be triggered.
GXV3611 Mini IP Dome Camera 5. Click Save to save the settings. To Remove a Monitored Area 1. In the Select a Region dropdown list, select the region you would like to remove. 2. Click Remove. 3. Click Save to save the changes. Configure Motion Detection Time Schedule & Alarm Actions This section allows you to configure the time during which the GXV3611 will monitor the motion detection. The GXV3611 not only can monitor your settings but also can take actions when the alarm is triggered.
GXV3611 Mini IP Dome Camera IP VIDEO SURVEILLANCE FAQ 1. What is the default IP address of GXV3601/3501/3504/3611? Prior to firmware version 1.0.3.9, the IP address of GXV3501/ 3504/ 3601/ 3611 is 192.168.1.168 at the factory default settings. You can perform a factory reset by pressing the RESET button on the device for 7 seconds. Starting from firmware version 1.0.3.9, the default IP configuration is DHCP. 2.
GXV3611 Mini IP Dome Camera 6. Why does IE indicate to install Grandstream Video Viewer add-on after a firmware upgrade? The add-on was properly installed before the firmware upgrade process. New firmware will often upgrade the add-on as well. To watch the live video stream, you must install the newest version of the add-on. 7. How do you watch secondary video stream? Login to the home page of the GXV3501/ 3504/ 3601/ 3611 web GUI, click Play to watch the video stream.
GXV3611 Mini IP Dome Camera 13. How can I use a cell phone to watch the GXV3501/ 3504/ 3601/ 3611 video stream? You must set the video resolution to QCIF to watch the GXV3501/3504 /3611 video stream from a cell phone. Make sure to set the bit rate to 64kbps to ensure the best video quality. 14. Why doesn’t the IP address of the device reset when I click the “Restore” button on the Maintenance page? The GXV3501/ 3504/ 3601/ 3611 could be installed in areas that are not easy to access.
GXV3611 Mini IP Dome Camera the RTSP port equals the web port +2000. RTSP port will be 2088. For example, if the web port is 88, then the 19. Tested PC display adapters.