User's Manual

Grandstream Networks, Inc. GXV3140 USER MANUAL Page 30 of 83
FIRMWARE VERSION 1.0.1.18 Updated : 09/2009
uses port 443. This field is for customizable web ports.
Admin Password This defines the administrator password for web interface access. Only the
administrator can configure the “Advanced Settings” and “Account x” pages. The
password is case sensitive and the maximum password length is 25 characters.
User Password This defines the user password for web interface access.
Maintenance/Upgrade and Provisioning
Lock Keypad for
Update
The default value is NO. If set to YES, the keypad will be disabled from making
any updates.
Upgrade Via This field allows the user to choose the firmware upgrade method: TFTP, HTTP
or HTTPS.
Firmware Server Path
Defines the server path for the firmware server. It can be different from the
Configuration server which is used for provisioning.
Config Server Path This is the server path for provisioning; it can be different from the firmware
server.
Firmware File Prefix This field enables your ITSP to lock firmware updates. If configured, only the
firmware with the matching encrypted prefix will be downloaded and flashed into
the phone.
Firmware File Postfix This field enables your ITSP to lock firmware updates. If configured, only the
firmware with the matching encrypted postfix will be downloaded and flashed
into the phone.
Config File Prefix This field enables your ITSP to lock configuration updates. If configured, only the
configuration file with the matching encrypted prefix will be downloaded and
flashed into the phone.
Config File Postfix This field enables your ITSP to lock configuration updates. If configured, only the
configuration file with the matching encrypted postfix will be downloaded and
flashed into the phone.
DHCP Option 66
override Server
The Default setting is YES. If DHCP option 66 is enabled on the LAN side, the
TFTP server can be redirected. Please be very careful when configuring this as
the redirection could break the phone if this happens during the firmware
upgrade.
Automatic Upgrade The default value is NO. Choose “YES” to enable automatic HTTP upgrade and
provisioning.
Hour of the day (0-23) Defines the hour of the day to check the HTTP/TFTP server for firmware