User's Manual

Grandstream Networks, Inc. GXV3140 USER MANUAL Page 37 of 83
FIRMWARE VERSION 1.0.1.18 Updated : 09/2009
• Example 3: {1xxx[2-9]xxxxxx | <2=011>x+}
Allows any number with leading digit 1 followed by a 3 digit number, followed by
any number between 2 and 9, followed by any 7 digit number OR Allows any
length of numbers with leading digit 2, replacing the 2 with 011 when dialed.
3. Default: Outgoing – {x+}
Allow any length of numbers.
Example of a simple dial plan used in a Home/Office in the US:
{ ^1900x. | <=1617>[2-9]xxxxxx | 1[2-9]xx[2-9]xxxxxx | 011[2-9]x. | [3469]11 }
Explanation of example rule (reading from left to right):
• ^1900x. - prevents dialing any number started with 1900
• <=1617>[2-9]xxxxxx - allows dialing to local area code (617) numbers by
dialing
7 numbers and 1617 area code will be added automatically
• 1[2-9]xx[2-9]xxxxxx |- allows dialing to any US/Canada Number with 11 digits
length
• 011[2-9]x. - allows international calls starting with 011
• [3469]11 - allow dialing special and emergency numbers 311, 411, 611 and 911
Note: In some cases where the user wishes to dial strings such as *123 to
activate voice mail or other applications provided by their service provider, the *
should be predefined inside the dial plan feature. An example dial plan will be:
{ *x+ } which allows the user to dial * followed by any length of numbers.
Early Dial The default setting is NO. Use only if the proxy supports 484 response.
Refer to Use Target
Contact
The default is NO. If set to YES, then for Attended Transfer, the “Refer-To”
header uses the transferred target’s contact header information.
Auto Answer The default setting is NO. If it is set to YES, the GXV3140 will play a “beep”
sound and answer the phone automatically on the speaker.
Send Anonymous If set to YES, the “From” header in the outgoing SIP messages will be set to
anonymous to block the caller ID from displaying. The default setting is NO.
Anonymous Call
Rejection
The default setting is NO；If set to YES，any anonymous call will be rejected（with
486Busy message）
Account Ring Tone There are four ring tones to choose from:
1 system ring tone: After selecting this, all calls will have the same ring tone.
3 custom ring tones: The phone will have different ring tones according to the
caller.
Special Feature The default setting is Standard; different features can be selected depending on