User's Manual

Grandstream Networks, Inc. GXV3140H USER MANUAL Page 26 of 146
FIRMWARE VERSION 1.0.7.2 Updated : 11/2010
DURING CALLS
ANSWERING CALLS
1. Single Incoming call: When the phone rings, you can use the headset, handset or speaker to
answer the call. The user may also press the SPEAKER button (
) or the corresponding
FUNCTION button for “Accept” on the LCD screen. (See figure 17)
Figure 17: Incoming call screen
2. Multiple Incoming Calls: Users will hear a call waiting tone and the LCD will display the number
of the caller when another call is incoming. At this moment, press the corresponding FUNCTION
button for “Accept” to establish a connection with the new call/caller. The current call will be placed
on hold. Users may press LINE button (
) to see the status of each line and to switch
between the lines.
3. Auto-Answer/Paging/Intercom: After the phone makes a “beep” sound, the call is automatically
established through the speaker. (The phone should be configured to enable “Auto Answer” or
“Paging/Intercom”. Support from PBX / IP-PBX is also required)
CALL HOLD/WAITING
1. Call Hold：Press the HOLD button (
) to place the call on hold. The following will be
displayed on the screen. (See figure 18)