User's Manual

Grandstream Networks, Inc. GXV3140H USER MANUAL Page 39 of 146
FIRMWARE VERSION 1.0.7.2 Updated : 11/2010
Disable Telnet The default value is No. If set to YES, the GXV3140H will not allow any
telnet access to the phone.
Access Method This defines the access method for web access: HTTP or secure HTTPS
protocol.
Port This defines the port for web access. By default, HTTP uses port 80 and
HTTPS uses port 443. This field is for customizable web ports.
Admin Password This defines the administrator password for web interface access. Only the
administrator can configure the “Advanced Settings” and “Account x”
pages. The password is case sensitive and the maximum password length
is 25 characters.
User Password This defines the user password for web interface access.
Maintenance/Upgrade and Provisioning
Lock Keypad for Update The default value is NO. If set to YES, the keypad will be disabled from
making any updates.
XML Config File Password The password used for encrypting the XML configuration file using
OpenSSL. This is required for the phone to decrypt the encrypted XML
configuration file.
HTTP/HTTPS User Name The user name for the HTTP server.
HTTP/HTTPS Password The password for the HTTP server.
Upgrade Via This field allows the user to choose the firmware upgrade method: TFTP,
HTTP or HTTPS.
Firmware Server Path
Defines the server path for the firmware server. It can be different from the
Configuration server which is used for provisioning.
Config Server Path This is the server path for provisioning; it can be different from the firmware
server.
Firmware File Prefix This field enables your ITSP to lock firmware updates. If configured, only
the firmware with the matching encrypted prefix will be downloaded and
flashed into the phone.
Firmware File Postfix This field enables your ITSP to lock firmware updates. If configured, only
the firmware with the matching encrypted postfix will be downloaded and
flashed into the phone.
Config File Prefix This field enables your ITSP to lock configuration updates. If configured,
only the configuration file with the matching encrypted prefix will be