User's Manual

Grandstream Networks, Inc. GXV3174 USER MANUAL Page 53 of 59
FIRMWARE VERSION 1.0.1.1 Updated : 3/2012
those features will be synchronized on the phone side and the Broadsoft
server side.
Enable Call Features The default is set to YES. If it is set to NO, call features are disabled.
Call Forward
Unconditional
Sets the number to forward to unconditionally.
Call Forward When Busy Sets the number to forward to when busy.
Call Forward When No
Answer
Sets the number to forward to when no answer.
Delayed Call Forward
Wait Time (s)
The wait time before transferring the call to another extension or to
voicemail; the default setting is 20 seconds.
No Key Entry Timeout (s) Defines the time out duration on no key entry.
Default setting is 4 seconds.
Ring Timeout (s) Defines the time out duration on no answer.
Default setting is 60 second.
Transfer on Conference
Hangup
Defines whether or not the call is transferred to the other party if the initiator
of the conference hangs up.
Default setting is set to No.
Use # as Dial Key Selects whether or not # is used as Send.
Account ring tone This allows the user to configure the general ringtone used for this account.
Users can choose from different ringtones from the dropdown menu. They
can also upload mp3 files in Ringtone manager for their own ringtone.
Ring Tone Users can select up to 3 distinctive ringtones to match incoming caller ID.
Users can choose from different ringtones from the dropdown menu. They
can also upload mp3 files in Ringtone manager for their own ringtone.
SAVING THE CONFIGURATION CHANGES
After users makes changes to the configuration, press the “Save” button in the Configuration Menu. The
web browser will then display a message window to confirm the saved changes. Reboot the phone for the
new settings to take effect if the settings that you have changed have a * next to it.
REBOOTING FROM REMOTE LOCATIONS
Press the “Reboot” button at the top right-hand corner of the configuration menu to reboot the phone
remotely. The web browser will then display a message window to confirm with the user if they wish to