TOOLS GXV3240 User Manual VIEW SMS The SMS page displays the received and sent SMS list, which are classified by contacts names or numbers as well as sorted by the time receive or send SMS. Tap on one specific SMS entry to view DF Di vis io n the interaction with the details of the contact's message, as shown in figure 92 below. NEW SMS Tap on x- P Figure 93 GXV3240 Send SMS in the toolbar on the SMS page to access SMS draft page. See figure 93. Grandstream Co., Ltd Software Version：1.0.0.
TOOLS Figure 94 GXV3240 New SMS DF Di vis 1. Select the account to send SMS in the drop-down menu. io n GXV3240 User Manual 2. Add contact. GXV3240 supports adding contact from the Contacts as well as directly input phone number. Input the number in the textbox then input comma to add another contact. Press x- P to select contacts or groups from the Contacts. 3. Click the textbox below to bring out the intelligent keyboard. 4. Input the message via the keyboard then touch “Send”.
TOOLS GXV3240 User Manual 2. Check the SMS you would like to delete and when it turns to blue background and the icon indicates the SMS has been selected and click again to unselect the SMS. Users could also tap on on the upper left corner to batch select/unselect. Select all indicates selects all SMS in the list. Unselect all indicates unselect all SMS in the list. 3. Press to delete the selected message.
TOOLS GXV3240 User Manual Figure 95 GXV3240 Recorder DF Di vis io n NORMAL RECORDER Figure 96 GXV3240 Normal Recorder 1. Tap on to initiate recording. x- P 2. Click “Save” to save the record file, click “Cancel” will bring out the dialog for users to confirm whether to save the file or not and to stop recording. Grandstream Co., Ltd Software Version：1.0.0.11 Document Version：0.
TOOLS GXV3240 User Manual Figure 97 GXV3240 Normal Record-Recording 3. Go back to the Recorder page, select one recording file and click on the right of the progress bar to play the file. CALL RECORDER In the process of an active call, the recording file will be saved on the phone. Users can only listen x- P DF Di vis io n to it via Recorder. See figure 97 below. Figure 98 GXV3240 Call Recordings IP LOCATION Grandstream Co., Ltd Software Version：1.0.0.11 Document Version：0.
TOOLS GXV3240 User Manual Based on the IP address provided, the following information will be given: Country, Region and City. DF Di vis io n See figure 98. Figure 99 GXV3240 IP Location x- P DIAGNOSIS Users could make operation like LCD Diagnosis, Keypad Diagnosis, LED Diagnosis, Audio Loopback and Camera Test on GXV3240 via built-in Diagnosis app. Grandstream Co., Ltd Software Version：1.0.0.11 Document Version：0.
TOOLS x- P FTP SERVER DF Di vis Figure 100 GXV3240 Diagnosis io n GXV3240 User Manual GXV3240 supports file transfer via FTP server. As shown in figure 100.Users can tap on “Start FTP Server” to activate it. Grandstream Co., Ltd Software Version：1.0.0.11 Document Version：0.
TOOLS Figure 101 GXV3240 FTP Server io n GXV3240 User Manual x- P computer. i.e., ftp://192.168.124.136:2121/ DF Di vis Once enabled, the field is shown in figure 101. Input the FTP address in the browser on the Figure 102 GXV3240 FTP Server- Start FTP Server Before start the FTP server ,you can tap on on the lower right corner of the page to access the settings .You can set the username and password, port number and the file directory to login the remote server. Grandstream Co.
TOOLS x- P DF Di vis Figure 103 GXV3240 FTP Server Settings io n GXV3240 User Manual Grandstream Co., Ltd Software Version：1.0.0.11 Document Version：0.
MULTIMEDIA GXV3240 User Manual MULTIMEDIA GXV3240 supports rich multimedia applications, users can play music and images on the device as DF Di vis x- P GALLERY io n well as surf the Internet to view news. Gallery could be used to view pictures from GXV3240 internal storage. Click menu to enter gallery. in the main Grandstream Co., Ltd Software Version：1.0.0.11 Document Version：0.
MULTIMEDIA Figure 104 GXV3240 Gallery The image folder from GXV3240 local storage will present on the Gallery page in the form of DF Di vis io n GXV3240 User Manual thumbnails, click the specific folder to enter image list interface. Click on the upper right to enable camera to take photos or videos. x- P Click the image folder to enter images list page, as shown in figure 104. Figure 105 GXV3240 Gallery-Images List Tap the slider to the left or right to flip to view all the images.
MULTIMEDIA GXV3240 User Manual Two modes to display images: users could tap on the switch button on the upper left corner to view images via Grid or Slide. Click the specific image to view it in full screen mode. See figure 105. DF Di vis io n Figure 106 GXV3240 Gallery- View Image in Full Screen Tap on the screen when the image is in full screen and click on the lower left corner to edit the image. Users could add effect to the image as well as crop/rotate the image, ect.
MULTIMEDIA GXV3240 User Manual io n Figure 107 GXV3240 Gallery- Edit Image Figure 108 GXV3240 Gallery- Edit Image via Menu Options Zoom In/ out ：Users could zoom in/out the image via finger gestures. Share: Click DF Di vis on the upper right corner of the image to select one mode to send the image. Long press one image to enter the editing mode. Users could choose one or multiple images to make operations like send, delete and rotate.
MULTIMEDIA GXV3240 User Manual BROWSER Users could browse webpage, view news and watch video via the built-in GXV3240 Browser. Press in the main menu to open Browser. x- P DF Di vis io n on Figure 110 GXV3240 Browser Slide up and down with slide gesture to scroll the screen. Zoom in/out the page via zoom gesture. Press the menu button on the phone to open the menu bar for more operations. AS shown in figure 110. Grandstream Co., Ltd Software Version：1.0.0.11 Document Version：0.
MULTIMEDIA GXV3240 User Manual x- P MUSIC DF Di vis io n Figure 111 GXV3240 Operating Browser via Menu Options Users could play the audio file on the phone or from the external storage. Press in the main menu to enable Music. Grandstream Co., Ltd Software Version：1.0.0.11 Document Version：0.
MULTIMEDIA RSS NEWS DF Di vis Figure 112 GXV3240 Music Interface io n GXV3240 User Manual Rss News is a desktop widget with which users could view the latest news. When the phone is running on idle screen, click the Menu button and select Edit Widgets in the pop-up menu, find RSS x- P News and drag it to the blank area of the desktop. Figure 113 GXV3240 RSS News Widget Click the up/down arrow on the right of RSS News to flip up or down. Grandstream Co., Ltd Software Version：1.0.0.
MULTIMEDIA GXV3240 User Manual Click the Refresh button on the left bottom of RSS News to refresh the news. Click the Settings button on the right bottom of RSS News to set up News Update Interval, DF Di vis io n Page-turning Intervals, Subscribe and RSS Feeds. WEATHER FORECAST x- P Figure 114 GXV3240 RSS News Settings Weather Forecast is a desktop widget with which users can view real-time weather information.
MULTIMEDIA GXV3240 User Manual Figure 115 GXV3240 Weather Forecast Widget Click the Refresh button on the upper right corner to update weather data. Click other area on the widget field to enter the detailed interface, as shown in figure 119. x- P DF Di vis io n Figure 116 GXV3240 Weather Forecast- Details Interface Users could set up Update, Share, Add City and other settings on the toolbar below the Weather Forecast detailed interface. Grandstream Co., Ltd Software Version：1.0.0.
GS MARKET GXV3240 User Manual io n GS MARKET DF Di vis GXV3240 provides direct access to apps via built-in GS Market app. Users could download the apps from the market and install to local. Click x- P VIEW APP’S DETAILS in the main menu to access GS Market. Figure 117 GXV3240 GS Market Grandstream Co., Ltd Software Version：1.0.0.11 Document Version：0.
GS MARKET GXV3240 User Manual Click the app icon to view details and users evaluation. SEARCH APPS Users could view the apps by category, or tap on to bring out the textbox and input the Click DF Di vis DOWNLOAD AND INSTALL APPS io n keyword of the app to search. below the app to download and install it. The icon will be shown below the downloaded app, click the icon to open the corresponding app. Tap on on the upper right of the page to view the download apps and installed apps.
GS MARKET GXV3240 User Manual The installing process will be automatically started after downloaded the app. Users could tap on Installed tab to view the installed apps, or uninstall the downloaded apps on this page. UPDATE APPS The GXV3240 will automatically detect if there is new version available for the installed apps to x- P DF Di vis apps on the Installed page, as shown in figure 118 below. io n upgrade when the network connection is normal.
GXV3240 User Manual CONNECTING TO NETWORKS AND DEVICES CONNECTING TO NETWORKS AND DEVICES io n NETWORK Network connection has a variety of ways, one is wired connection via the cables, and the other ENABLE ETHERNET Follow the steps below to turn on Ethernet: DF Di vis way is to connect via Wi-Fi. enter Network Settings. x- P 1. Insert the cable into the LAN port behind the phone then go to Settings and click Network to 2. Click Ethernet Settings and choose IPv4 or IPv6 to enter Settings. 3.
GXV3240 User Manual CONNECTING TO NETWORKS AND DEVICES DHCP If there are no requirements for network, users could select DHCP to reduce the risk of network disconnection. The steps 1 and 2 to obtain DHCP are the same as the steps in Ethernet Settings. Step 3 is to select DHCP. ENABLE PPPoE io n If the network is ADSL, users can connect to the network by means of dial-up. The steps 1 and 2 to enable PPPoE can be set following the steps above in Turn on Ethernet.
CONNECTING TO NETWORKS AND DEVICES GXV3240 User Manual SEARCH AND ADD WI-FI The phone will automatically search the available WI-Fi Within the effective range once enabled. Tap on the SSID and input the right password in the pop-up dialog, click Connect to connect to the DF Di vis io n selected Wi-Fi. BLUETOOTH x- P Figure 120 GXV3240 Wi-Fi Connection Users could use the Bluetooth to transfer files as well as make calls and listen to the music.
CONNECTING TO NETWORKS AND DEVICES GXV3240 User Manual Click to enable the Bluetooth in the drop-down status bar. Users need to pair the Bluetooth after enabled it then put it into use. BLUETOOTH SETTINGS Users could set up whether all the discovered Bluetooth in range will show or not on the Bluetooth x- P DF Di vis io n Settings page once enabled the Bluetooth, the available detection duration is 2 minutes.
CONNECTING TO NETWORKS AND DEVICES DF Di vis Figure 122 GXV3240 Search Bluetooth io n GXV3240 User Manual 2. Search for the device you want to pair in the Available Devices. x- P 3. Tap on the device ID on GXV3240, The pop-up dialog is shown in figure 122: Figure 123 GXV3240 Pair Bluetooth 4. Tap on the Pair button to pair Bluetooth. This is a two-way operation, namely the Bluetooth that being requested to pair should accept the pairing request.
CONNECTING TO NETWORKS AND DEVICES GXV3240 User Manual CONNECTING TO A BLUETOOTH DEVICE Users could find the pairing Bluetooth in the Paired Devices. Tap on it to connect. The connected device will display the corresponding status. to unpair Bluetooth as well as rename and configure it. DF Di vis io n Tap on x- P Figure 124 GXV3240 Bluetooth Device Settings SEND FILES VIA BLUETOOTH Users could transmit file and Contacts data via Bluetooth when the Bluetooth is connected successfully.
Figure 125 GXV3240 Send File via Bluetooth io n CONNECTING TO NETWORKS AND DEVICES GXV3240 User Manual DF Di vis The GXV3240 will display the following page as shown in figure 129 when receiving a request to transmit file. Click “Yes” to download the file under directory SD Card/Bluetooth. Figure 126 GXV3240 Transmit File via Bluetooth x- P USE BLUETOOTH HEADSET FOR CALLS 。 Users could switch voice channel in the process of calls once Bluetooth headset is connected successfully.
CONNECTING TO NETWORKS AND DEVICES GXV3240 User Manual incoming call. Refer to the EHS Headset Manual for detailed operations. Refer to the chapter Via EHS Headset to learn how to switch EHS headset voice channel. Click on http://www.grandstream.cn/Wenti_view.aspx?Id=110 to view headset compatibility. EXTERNAL USB DEVICE Insert the USB device to the USB port on the right side of the GXV3240, a USB device icon will io n show on the status bar.
CONNECTING TO NETWORKS AND DEVICES GXV3240 User Manual EXTERNAL SD CARD Insert the SD card to the SD port on the right side of the GXV3240, a SD card icon will show on the status bar. Users could also open the File Manager to view the external SD card status and the files DF Di vis io n stored in it. See figure 127. x- P Figure 128 GXV3240 External SD Card Status Grandstream Co., Ltd Software Version：1.0.0.11 Document Version：0.
GXV3240 LCD SETTINGS GXV3240 User Manual GXV3240 LCD SETTINGS The GXV3240 LCD MENU provides easy access to the settings on the phone that io n making it more convenient to accommodate users’ habits. There are two ways to Follow open Click Press the Menu button in the main menu. DF Di vis Settings: when the phone is running on idle and select “System Settings” in the pop-up menu. x- P The Settings page is shown in figure 128. Figure 129 GXV3240 System Settings Grandstream Co.
GXV3240 LCD SETTINGS GXV3240 User Manual PERSONALIZED ACCOUNT Personalized Account allows users to set up varied ring tone and personalized features to each account. Go to Personalized Account page, tap on one account to set. The account will show up with registration status on the right side of the Personalized Account menu. Ringtone: Select ringtone for the incoming call. If choose Custom Ringtone, users could select the custom ringtone in the File Manager.
GXV3240 LCD SETTINGS GXV3240 User Manual WIRELESS & NETWORK Users could configure network connection features via Wireless & Network. Ethernet settings: Set up a series of network parameters like DHCP. Wi-Fi: Check/uncheck to turn on/off Wi-Fi. The GXV3240 would automatically scan the available Wi-Fi and connect to it once enabled Wi-Fi. Wi-Fi settings: Set up and manage W-Fi access point.
GXV3240 LCD SETTINGS GXV3240 User Manual Notification tone: Select notification tone for applications like SMS. DISPLAY Use Display to configure the screen display parameters like brightness and screen saver. Brightness: Tap on Brightness and scroll the slider to left/right to adjust the brightness on the GXV3240 LCD; io n Screen timeout: Tap to set the timeout interval before the LCD turns dark form idle screen. STORAGE Check the internal storage of the phone.
GXV3240 LCD SETTINGS GXV3240 User Manual LOCATION ACCESS Set whether to let app to use Google location service to collect location data. SECURITY SETTINGS Set up the security parameters on the phone. Screen lock. Set up pattern or password for screen lock. Please set up the pattern with the Wizard. io n Owner info. Display owner info on the lock screen. Display password. The screen will display the input value when users input the password if DF Di vis check the option.
GXV3240 LCD SETTINGS GXV3240 User Manual LANGUAGE &KEYBOARD Language. Tap to open a list of language options. Spell checker. Configure whether to check spellings and select the available spell-checker tool. Personal dictionary. Add words to user dictionary. Keyboard & input methods. Set up the default input method. Android keyboard（AOSP）. Set up whether to use Android keyboard and configure Android Text-to-speech (TTS) output: Set up TTS. Moue/trackpad. Set up the point speed.
GXV3240 LCD SETTINGS GXV3240 User Manual Contacts. The contact synchronizes with Google account will show in the Contacts. Refer to DF Di vis io n Figure 130 GXV3240 Google Play-Add Account the chapter Manage Contacts-Account for details. DATE &TIME Enable and Use Specified NTP Server Address. Set the specified NTP server URL or IP address. x- P Set date. Set the date on GXV3240 manually if not set auto sync. Set time. Set the time on GXV3240 manually if not set auto sync.
GXV3240 LCD SETTINGS GXV3240 User Manual Account status. Displays the account name and registration status on the GXV3240. Network status. Displays MAC Address, IP Address info, ect. System Info. Displays the system version of the GXV3240. ADVANCED SETTINGS Users could open Advanced Settings to configure Account Advanced Settings, Upgrade, Syslog& Factory Reset. Account.
GXV3240 WEB GUI GXV3240 User Manual GXV3240 WEB GUI DEFINITIONS io n This chapter introduces the GXV3240 Web GUI. As mentioned, you can log in as an administrator DF Di vis or a user. Status: Displays the Account Status, Network Status, and System Info of the phone; Account (1-6): To configure each of the SIP accounts. Including General Info, Network Settings, SIP Settings, Encoding Settings, Call Settings.
GXV3240 WEB GUI GXV3240 User Manual ACCESSING GXV3240 WEB GUI IP ADDRESS Users could view the GXV3240 IP Address via Account widget on the screen as shown in figure DF Di vis io n 130. Figure 131 GXV3240 Desktop Widget-Account x- P TO ACCESS THE GXV3240 WEB GUI 1. Connect the computer to the same network as the phone; 2. Open a Web browser on your computer, enter the phone’s IP address in the address bar of the browser; for example: http://192.168.124.111; Grandstream Co.
GXV3240 WEB GUI DF Di vis io n GXV3240 User Manual Figure 132 GXV3240 Web GUI-Login 3. Press the “Enter” button and input the administrator’s login and password in the prompt box. set to "admin". 4. x- P The default login name for the administrator is "admin". The default administrator password is Select the language being used on Web page in the drop-down menu of the language bar. Chinese and English are optional. 5. Click “Login” to access the Web GUI.
GXV3240 WEB GUI GXV3240 User Manual page or press the “Enter” Button, the Web browser will prompt to indicate having saved successfully. For those options with next to them, users must reboot the phone for the changes to take effect. CONFIGURE WEB PAGE GXV3240 WEB page includes Status, Account, Advanced Settings and Maintenance. Users could io n login the phone with varied username and the corresponding access permissions are DIFFERENT.
GXV3240 WEB GUI GXV3240 User Manual Select the language. Reboot the phone. Logout. STATUS GXV3240 Status page includes Account Status. Network Status and System Info. Users could click x- P DF Di vis io n the corresponding option on the left navigation bar to enter each subpage. See figure 133. Figure 134 GXV3240 Web GUI Status-Account Status Table 9 Status/Account Status Parameters Parameters Description Grandstream Co., Ltd Software Version：1.0.0.11 Document Version：0.
GXV3240 WEB GUI GXV3240 User Manual All the 6 SIP accounts on the phone. Number The number or extension corresponds to each account. SIP Server The SIP server the account registers with Status Two registration status for the SIP account: Registered and Unregistered. DF Di vis io n Account Figure 135 GXV3240 Web GUI Status-Network Status x- P Table 10 Status/Network Status Parameters Parameters Description MAC Address GXV3240 MAC address.
GXV3240 WEB GUI io n GXV3240 User Manual Table 11 Status/System Info Parameters DF Di vis Figure 136 GXV3240 Web GUI Status-System Info Description Product Model Product model of the phone. Hardware Revision Hardware version number. Part Number Product part number. System Version Firmware version. This is the main software release version. Recovery Version Recovery image version. Boot Version Booting code version. Kernel Version Kernel version. Android Version Android OS version.
GXV3240 WEB GUI GXV3240 User Manual ACCOUNT Users could configure each account on Account page.GXV3240 has six independent SIP accounts that can be configured on an individual configuration page. Users could select Account X in the menu bar on WEB GUI to enter the corresponding account configuration page. See figure 136. The account page has five parts as General Settings, Network Settings, SIP Settings, Codec Settings and Call Settings.
GXV3240 WEB GUI GXV3240 User Manual Account Active This field indicates whether to activate the account. The phone will not send login message to the SIP server if uncheck this option. Account Name SIP Server The name associated with each account to be displayed on the LCD. The URL or IP address of the SIP server. This is provided by your VoIP service provider (ITSP). SIP User ID User account information, provided by your VoIP service provider (ITSP).
GXV3240 WEB GUI io n GXV3240 User Manual Figure 138 GXV3240 Web GUI Account-Network Settings Parameters Outbound Proxy Description DF Di vis Table 13 Account/Network Settings Parameters IP address or URL of the Outbound Proxy, Media Gateway, or Session Border Controller. It's used by the phone for Firewall or NAT penetration in different network environments. If a symmetric NAT is detected, STUN will not work and ONLY an Outbound Proxy can provide a solution.
GXV3240 WEB GUI GXV3240 User Manual NAT Traversal This parameter configures whether the NAT traversal mechanism is activated. If set to "STUN" and STUN server is configured, the phone will route according to the STUN server. If NAT type is Full Cone, Restricted Cone or Port-Restricted Cone, the phone will try to use public IP addresses and port number in all the SIP&SDP messages.
GXV3240 WEB GUI x- P DF Di vis io n GXV3240 User Manual Grandstream Co., Ltd Software Version：1.0.0.11 Document Version：0.
GXV3240 WEB GUI GXV3240 User Manual Figure 139 GXV3240 Web GUI Account-SIP Settings Table 14 Account/SIP Settings Parameters Parameters Description SIP Registration The default setting is "Yes”. Selects whether or not the phone will send SIP Register messages to the proxy/server. If set to "No”, the phone will not send SIP Register messages to the proxy/server. Unregister Before If set to "Yes", the SIP user's registration information will be cleared when the phone reboots.
GXV3240 WEB GUI GXV3240 User Manual UAS Specify As a Callee, select UAC（User Agent Client） to use caller or proxy server as the refresher; or select UAS （User Agent Server）to use the phone as the refresher. Refresher Force INVITE The Session Timer can be refreshed using the INVITE method or the UPDATE method. Select "Yes" to use the INVITE method to refresh the session timer.
GXV3240 WEB GUI GXV3240 User Manual Support SIP Defines whether SIP Instance ID is supported or not. The default setting is "Yes". Instance ID Validate Incoming Defines whether the incoming SIP messages will be validated or not. SIP Messages Validate Incoming If set to "Yes", the phone will response to SIP 401 Unauthorized to validate the incoming INVITE message. The default setting is "No". INVITE Session SIP T1 Timeout The default setting is 0.5 seconds.
GXV3240 WEB GUI x- P DF Di vis io n GXV3240 User Manual Figure 140 GXV3240 Web GUI Account- Codec Settings Table 15 Account/Codec Settings Parameters Parameters Description DTMF This parameter specifies the mechanism to transmit DTMF digits. There are 3 supported modes: In audio: DTMF is combined in the audio signal (not very reliable with low-bit-rate codecs), Via RTP (RFC2833).
GXV3240 WEB GUI GXV3240 User Manual DTMF Payload Species the DTMF payload type using RFC2833. The default is 101. Type Preferred Vocoder 5 different vocoder types are supported on the phone, including PCMA, PCMU, G.722, G.726-32, iLBC. Users can configure vocoders in a preference list that is included with the same preference order in SDP message. 20 ms or 30 ms is optional. Support RFC5168 If set to “Yes”, the video call would support RFC5168. The default setting is "No". H.
GXV3240 WEB GUI GXV3240 User Manual Voice Frames Per Configures the number of voice frames transmitted per packet.( The maximum value of IS limit that based on Ethernet packets is recommended to be 1500 bytes or 120Kbit/s) TX When configuring this, it should be noted that the "ptime" value for the SDP will change with different configurations here. This value is related to the codec used and the actual frames transmitted during the in payload call. i.e., If set the first code to G.
GXV3240 WEB GUI x- P DF Di vis io n GXV3240 User Manual Grandstream Co., Ltd Software Version：1.0.0.11 Document Version：0.
GXV3240 WEB GUI GXV3240 User Manual Figure 141 GXV3240 Web GUI Account – Call Settings Table 16 Account/Call Settings Parameters Parameters Start Description Video Automatically Remote Press the Conference button will automatically connect the active line to the conference. Video Configure video request type. Three options are available: Prompt, Accept, deny. Request The default setting is “Prompt”. Dial Plan Prefix Set dial prefix.
GXV3240 WEB GUI GXV3240 User Manual Three options. The default is “log all calls”. Call Log Special Feature log all calls: Log all calls; Only log incoming/outgoing calls: Disable Missed calls record. Disable call log: Disable call record. The default setting is "Standard". Users may need to select special features to meet the specific requirements of different soft switch vendors. Feature Key Call features can be synchronized with SIP server.
GXV3240 WEB GUI GXV3240 User Manual Defines whether the call will be transferred once the conference host hangs up the 3-Party Conference host phone. If check, the other two parties will still on line if the host hangs up.The default transfer the call is uncheck. Conference URI Configure Conference URI（Broadsoft Standard）according to N-way conference Broadsoft Enable Broadsoft Call Center. The default setting is “No”. Call Center Hoteling Event Enable Broadsoft event function.
GXV3240 WEB GUI GXV3240 User Manual The account page has six parts as General Settings, Call Features, Video settings, Tone Generator, MPK General Settings, MPK LCD Settings. User could click the corresponding option on the x- P DF Di vis io n navigation bar on the left to configure respectively. Figure 142 GXV3240 Web GUI-Advanced Settings Table 17 Advanced Settings/General Settings Parameters Parameters Description Grandstream Co., Ltd Software Version：1.0.0.11 Document Version：0.
GXV3240 WEB GUI GXV3240 User Manual Local RTP Port Defines the local RTP-RTCP port pair used to listen and transmit. It is the base RTP port for channel 0. Users should configure 2 ports for one RTPdialogue: one for RTP and the other for RTCP. When configured, channel 0 will use this port_value for RTP and the port_value+1 for its RTCP; channel 1 will use port_value+2 for RTP and port_value+4 for RTCP. The default value is 5004.
GXV3240 WEB GUI DF Di vis io n GXV3240 User Manual Figure 143 GXV3240 Web GUI Advanced Settings-Call Features Parameters Always Description Ring x- P Table 18 Advanced Settings/Call Features Parameters If set to “Yes”, the incoming call will ring through speakers when using headphones. speaker The default is "No". Auto Conference If set to “Yes”, when during an active or more calls, users could press the Conference icon to join all the current lines on the phone. The default setting is "No".
GXV3240 WEB GUI GXV3240 User Manual Disable DND The default setting is "No". If set to "Yes", the ring splash that indicates an incoming Reminder Ring call when DND is enabled will not be played. Disable The default setting is "No". If set to "Yes", the phone cannot make IP calls via IP-Call IP-Call mode mode. Use Quick IP-Call Users can dial an IP address under the same LAN/VPN segment by entering the last mode octet in the IP address.
GXV3240 WEB GUI DF Di vis io n GXV3240 User Manual Figure 144 GXV3240 Web GUI Advanced Settings-Video Settings Table 19 Advanced Settings/Video Settings Parameters Configure the frame rate for SIP video call. The default setting is “15 Frames/ Second”. x- P Frame Rate Grandstream Co., Ltd Software Version：1.0.0.11 Document Version：0.
GXV3240 WEB GUI DF Di vis io n GXV3240 User Manual Figure 145 GXV3240 Web GUI Advanced Settings-Tone Generator Table 20 Advanced Settings- Tone Generator Parameters Parameters Call Progress Description Users can configure ring or tone frequencies based on parameters from the local x- P telecom provider. By default, they are set to the North American standard. Tones Frequencies should be configured with known values to avoid uncomfortable high pitch sounds.
GXV3240 WEB GUI DF Di vis io n GXV3240 User Manual x- P Figure 146 GXV3240 Web GUI Advanced Settings-MPK General Settings Table 21 Advanced Settings/ MPK General Settings Parameters BLF Call-pickup The prefix when the phone using MPK to call up. Each account is set to “**”by default. Prefix The Event List URI in MPK list, it requires server support. Users should firstly Event List URI configure a Event List URI including expanded list on the server (i.e.: BLF1006@myserver.
GXV3240 WEB GUI DF Di vis io n GXV3240 User Manual Figure 147 GXV3240 Web GUI Advanced Settings- MPK LCD Settings Table 22 Advanced Settings/ MPK LCD Settings Parameters Configure MPK key mode on the GXV3240 extension board Speed Dial: Dial the uesr ID on the extension board. BLF: Monitor the call ID status on the extension board. Call Transfer: Transfer the current active call to the user ID on the extension board.
GXV3240 WEB GUI GXV3240 User Manual Display MPK format: User name, User ID, User ID(User Name) Display Format Show Display x- P DF Di vis io n Name from Server Figure 148 GXV3240 Web GUI Advanced Settings - MPK EXT Settings Grandstream Co., Ltd Software Version：1.0.0.11 Document Version：0.
GXV3240 WEB GUI GXV3240 User Manual Table 23 Advanced Settings/ MPK EXT Settings Parameters（Extension board 1/2/3/4） Account Set up the SIP account for MPK keys. Name Set up the corresponding name of MPK keys. User ID Set up the user ID corresponds to MPK keys. MPK ID is used to one-to-one tag 160 MPK keys on the 4 extension boards. The default number is 1-160. The user can click on Up and Down button to view the MPK ID MPK ID of each extension board. i.e.
GXV3240 WEB GUI x- P DF Di vis io n GXV3240 User Manual Grandstream Co., Ltd Software Version：1.0.0.11 Document Version：0.
GXV3240 WEB GUI GXV3240 User Manual Figure 149 GXV3240 Web GUI Maintenance-Network Settings Table 24 Maintenance/Network Settings Parameters Parameters Specifications Address Type Allows users to obtain IP address via the following modes DHCP: Obtain IP address form DHCP server automatically. PPPoE: Dial up via PPPoE. Static IP: Static IP address configured by administrator. DNS Server 1 Enter the DNS Server 1. DNS Server 2 Enter the DNS Server 2.
GXV3240 WEB GUI io n GXV3240 User Manual Table 25 Maintenance-Time Settings Parameters Parameters Assigned Specification NTP Defines the URL or IP address of the specified NTP server to synchronize the date and time with NTP server. Server Address Defines whether DHCP Option 42 should override NTP server or not.
GXV3240 WEB GUI GXV3240 User Manual Time Display Configures the time display format on the LCD. Display Configures the date display format on the LCD. Format Date x- P DF Di vis io n Format Figure 151 GXV3240 Web GUI Maintenance-Web/SSH Access Table 26 Maintenance/ Web/SSH Access Parameters Parameter Description Disable SSH The default setting is “No”. If set to “Yes”, the phone will not allow any SSH access to the phone.
GXV3240 WEB GUI GXV3240 User Manual Admin Password Allows users to change the admin password. Only the administrator could configure the Advanced Configuration page. This field is case sensitive with a maximum length of 32 characters. User Password Allows the administrator to set the password for user-level GUI access. This field is x- P DF Di vis io n case sensitive with a maximum length of 32 characters. Grandstream Co., Ltd Software Version：1.0.0.11 Document Version：0.
GXV3240 WEB GUI x- P DF Di vis io n GXV3240 User Manual Figure 152 GXV3240 Web GUI Maintenance-Upgrade Table 27 Maintenance/Upgrade Parameters Grandstream Co., Ltd Software Version：1.0.0.11 Document Version：0.
GXV3240 WEB GUI GXV3240 User Manual Parameters Description Configuration via Set LCD menu configuration permission. No Limited or General Settings is optional. File The password for encrypting the XML configuration file using OpenSSL. This is LCD Menu XML Config Password required for the phone to decrypt the encrypted XML configuration file. HTTP/HTTPS User Input the authenticated user name if HTTP/HTTPS or configured server adopts User Name authentication mode.
GXV3240 WEB GUI GXV3240 User Manual DHCP Option 120 Override Enables DHCP Option 120 from local server to override the SIP Server on the phone. SIP Server 3CX Auto Enables automatic provision feature on the phone when 3CX is used as the SIP Provision server. Automatic Upgrade This function is set for the network service provider. The default setting is "No". If set the checking time for every week/day/intervals, the Auto Upgrade and the corresponding configurations will be enabled.
GXV3240 WEB GUI io n GXV3240 User Manual Table 28 Maintenance/Syslog Parameters Parameters Syslog Server Description The URL/IP address for the syslog server. This function appeals to the VOiP service server. Syslog Level DF Di vis Figure 153 GXV3240 Web GUI Maintenance-Syslog Selects the level of logging for syslog. The default setting is None. It means send no x- P syslog. The 4 levels from high to low are: DEBUG, INFO, WARNING and ERROR.
GXV3240 WEB GUI DF Di vis io n GXV3240 User Manual Figure 154 GXV3240 Web GUI Maintenance-Logcat Table 29 Maintenance/Logcat Parameters Clear Log Log Tag Log Level Description Press the clear log button to clear log. Specifies the log tag to filter the log. x- P Parameters Selects the log priority in the drop-down menu. Grandstream Co., Ltd Software Version：1.0.0.11 Document Version：0.
GXV3240 WEB GUI io n GXV3240 User Manual Table 30 Maintenance/Debug Parameters Parameters Capture Trace Description DF Di vis Figure 155 GXV3240 Web GUI Maintenance –Debug Press Start to start capturing a trace and press Stop to discontinue .Capture Trace will help to diagnosis. The default is disabled. View Trace Press LIST to view the list of captured traces. It will show the time when the trace was x- P captured. Click on the name of the file to download and view the trace. Grandstream Co.
GXV3240 WEB GUI io n GXV3240 User Manual Table 31 Maintenance-Language Parameters Parameters Language Description DF Di vis Figure 156 GXV3240 Web GUI Maintenance-Language Select the language displayed on the phone. GXV3240 supports multi language: x- P Chinese, English, Spanish, French, Russian and etc. Grandstream Co., Ltd Software Version：1.0.0.11 Document Version：0.
GXV3240 WEB GUI DF Di vis io n GXV3240 User Manual Table 32 Maintenance/TR-069 Parameters x- P Figure 157 GXV3240 Web GUI Maintenance-TR-069 Parameters Description Enable TR-069 If set to "Yes", the phone will send session connection request to the ACS. ACS URL URL for TR-069 Auto Configuration Servers (ACS). There are 2 methods toidentify ASC server: IP Address i.e: http://10.10.10.1:9090 Domain Name i.e:http://huawei.acs.com:9090 Note: 9090 is the port number of ASC server Grandstream Co.
GXV3240 WEB GUI GXV3240 User Manual ACS username ACS username to authenticate TR-069 when the phone sends connecting request to ASC. It should be in accordance with ASC configuration. ACS password Periodic Inform Enable Periodic Inform ACS password for TR-069. It should be in associated with ASC configuration. If set to "Yes", the phone will send inform packets to the ACS periodically. Sets up the periodic inform interval (in seconds) to send the inform packets to the Interval (s) ACS.
GXV3240 WEB GUI DF Di vis io n GXV3240 User Manual Table 33 Maintenance/Contacts Parameters Parameters Description x- P Figure 158 GXV3240 Web GUI Maintenance-Contacts Import/Export Supports import/export Contacts: UTF-8，GBK，UTF-16，UTF-32，Big5， File Encoding Big5-HKSCS,Shift-JIS,IOS8859-1,IOS8859-15,Windows-1251,EUC-KR . File Type Save Phonebook to PC Clear The Old List Supports import/export Contacts: XML，VCard，CSV. Allow users to save XML file to PC.
GXV3240 WEB GUI GXV3240 User Manual Replace Duplicate Items Local File The phone will delete all the duplicated items before downloading new ones if check. The default is uncheck. Click Browse to select XML file and download it to the phone. Download Clear The Old List Replace Duplicate Items Download Mode The phone will delete all the duplicated items before downloading new ones if check. The default is uncheck. The phone will delete all the duplicated items before downloading new ones if check.
GXV3240 WEB GUI DF Di vis io n GXV3240 User Manual Table 34 Maintenance/LDAP Book Parameters x- P Figure 159 GXV3240 Web GUI Maintenance-LDAP Book Parameters Descriptions Server Address LDAP server address, users could input IP address or domain name. Port Set up the port number of LDAP server. Set up the base DN to inquire on the serve ,namely under which Base DN directory to inquire contacts.i.e.
GXV3240 WEB GUI GXV3240 User Manual Set up the name attribute of each record returned from LDAP search. LDAP Name Attributes It allows users to configure multiple name attribute separated by spaces. i.e., gn cn sn description。 Set up the number attribute of each record returned from LDAP search. It allows users to configure multiple number attribute LDAP Number Attributes separated by spaces. i.e.
GXV3240 WEB GUI GXV3240 User Manual “No”. LDAP Lookup For Set up whether to appy LDAP lookup for incoming call. The default setting is “No”. x- P DF Di vis io n Incoming Call Figure 160 GXV3240 Web GUI Maintenance-Device Manager Table 35 Maintenance/Device Manager Parameters Parameters Description Users could set up the environment settings to obtain better visual AE Mode Disable effect. Bright environment and dark environment are optional. Missed Call missed call.
GXV3240 WEB GUI GXV3240 User Manual Set up whether to disable LED MWI Indicator when there is a unread Disable MWI Indicator message. The default setting is “No”. Disable New Message If set to “Yes”, the indicator will be disabled when there is a new Indicator message. The default setting is “No”. Disable Contact or Message Full Indicator Disable Indicator When LCD is Off If set to “Yes”, the indicator will be enabled when the storage of contacts or messages is full.
GXV3240 WEB GUI GXV3240 User Manual corresponding icon. Press the hardkey HEADSET or the numeric key will initiate the headset mode as default. Press the Answer button on screen or the hardkey HEADSET to speak via headset when there is an incoming call Press the hardkey HEADSET to switch to the Headset/Speaker x- P DF Di vis io n during an active call . Grandstream Co., Ltd Software Version：1.0.0.11 Document Version：0.
UPGRADING AND PROVISIONING GXV3240 User Manual UPGRADING AND PROVISIONING GXV3240 supports software upgrade via TFTP or HTTP/HTTPS. Go to Advanced Settings page to DF Di vis CONFIGURATION FILE DOWNLOAD io n configure. Grandstream SIP Devices can be configured via the WEB Interface as well as via a Configuration File (binary or XML) through TFTP or HTTP/HTTPS. The “Config Server Path” is the TFTP, HTTP x- P or HTTPS server path for the configuration file.
UPGRADING AND PROVISIONING GXV3240 User Manual When a Grandstream Devices boots up or reboots, it will issue a request for a configuration XML file named "cfgx.xml" followed by a file named "cfgxxxxxxxxxxxx", where "xxxxxxxxxxxx" is the MAC address of the device, i.e., "cfg000b820102ab". The configuration file name should be in lowercase letters. For more details on XML provisioning, please refer to: io n http://www.grandstream.com/general/gs_provisioning_guide_public.
UPGRADING AND PROVISIONING GXV3240 User Manual Figure 162 HFTP Server Interface -Configure Dialog io n Set the path to save the file under “Upload/Download”in“TFTP Configuration”tab. x- P DF Di vis 3. Figure 163 Set HFTP Server Path 4. Select the path then click “Ok” to bring out the following dialog. Figure 164 Confirm Changes Grandstream Co., Ltd Software Version：1.0.0.11 Document Version：0.
UPGRADING AND PROVISIONING GXV3240 User Manual 5. Click “Yes” to confirm changes. 6. Click “Ok” to close the dialog. Note: The file uploaded to sever should be unzipped.bin file. CONFIGURE HTTP SERVER The following chapter will take 3CDaemon TFTP as an example. io n You could obtain Apache HTTP server installation provisioning from http://httpd.apache.org, and follow the wizard to complete the default installation. 1. DF Di vis The following chapter will take using Apache HTTP Server2.
UPGRADING AND PROVISIONING GXV3240 User Manual FIRMWARE UPDATE Update via upload firmware file Manual update via firmware file Auto update via firmware server This chapter will introduce the three upgrade methods in details. Note: io n GXV325 supports the following ways to update DF Di vis It is HIGHLY recommended that an Uninterruptible Power Supply (UPS) be used in conjunction with the device in the process of update or it might be fail.
UPGRADING AND PROVISIONING GXV3240 User Manual Figure 165 Select Firmware File 2. The pop-up dialog will show on screen, users could confirm to update according to the prompt. MANUAL UPDATE The steps to update file via HTTP are the same as via TFTP. Theis chapter will take via TFTP as an example. Go to Maintenance>Upgrade, Select “No” in “ Automatic Upgrade” ,as shown in figure 165.
UPGRADING AND PROVISIONING GXV3240 User Manual 4. Uncheck “DHCP Option 66 Override Server”, as shown in figure169.If check, it allows the phone to obtain IP address as well as the upgrade server address via DHCP. This address will override the “Firmware server path” configured in step 3. Figure 169 Set up whether to Enable Option 66 Override Server Click “Save” to save the change. 6. Click the Reboot icon to boot up the phone and upgrade the device. AUTO UPGRADE DF Di vis io n 5.
UPGRADING AND PROVISIONING GXV3240 User Manual Figure 171 Automatic Upgrade Rule Setting 3. Set up upgrade and upgrade server. Select “TFTP”in “Upgrade Via ”option and input the local TFTP server address in the “Firmware Server Path” option. URL and IP address are optional. 4. DF Di vis Figure 172 Upgrade Setting io n See figure 171. Uncheck “DHCP Option 66 Override Server”, as shown in figure 180.If check, it allows the phone to obtain IP address as well as the upgrade server address via DHCP.
UPGRADING AND PROVISIONING GXV3240 User Manual WARNING: Restoring the Factory Default Settings will DELETE all configuration information on the phone. Please backup or print all the settings before you restore to the factory default settings. Grandstream is not responsible for restoring lost parameters and cannot connect your device to your VoIP service provider VIA LCD MENU Follow the steps below to restore the GXV3240 to the factory default settings.
UPGRADING AND PROVISIONING GXV3240 User Manual 2. Click on the Reset button for Factory reset. See figure 174. Figure 175 Web GUI-Factory Reset DF Di vis Figure 176 Web GUI-Confirm Factory Reset io n 3. A dialog box will pop up shown in figure 175; 4. Click OK to restore the phone to factory settings. VIA BUTTONS press and x- P When the message waiting indicator LED goes out the first time after the GXV3240 is powered, at the meanwhile.
FAQs GXV3240 User Manual FAQs Q: Why my GXV3240 screen is dark? Please check whether your phone is powered on. Please ensure that the GXV3240 is connected io n correctly to the power adapter. DF Di vis Q: Why my GXV3240 touch screen is not sensitive? Check that the power adaptor for GXV3240 is the original 12V BY adaptor. Q: Why I can’t hear the dial tone through my GXV3240? Please ensure that all units of the GXV3240 have been installed and connected correctly.
FAQs GXV3240 User Manual Q: How to change the user password? Please login the WEB GUI, go to Maintenance->Web/SSH Access and input new password in the textbox of” User Password” option, save the change then reboot the phone. x- P DF Di vis io n Please visit our website: http://www.grandstream.cn/ for answers to your more questions. Grandstream Co., Ltd Software Version：1.0.0.11 Document Version：0.
