User's Manual

GXV3240 User Manual
GXV3240 WEB GUI
Grandstream Co., Ltd
Software Version：1.0.0.11 Document Version：0.1
172
Parameters
Description
Configuration via
LCD Menu
Set LCD menu configuration permission. No Limited or General Settings is optional.
XML Config File
Password
The password for encrypting the XML configuration file using OpenSSL. This is
required for the phone to decrypt the encrypted XML configuration file.
HTTP/HTTPS User
Name
Input the authenticated user name if HTTP/HTTPS or configured server adopts User
authentication mode.
HTTP/HTTPS
Password
Input the authenticated user password if HTTP/HTTPS or configured server adopts
User authentication mode.
Upgrade Via
Allows users to choose the firmware upgrade method: TFTP, HTTP, HTTPS or
manual upload.
Firmware Server
Path
Defines the IP address or domain name for the firmware upgrade server.
Configure Server
Path
Defines the IP address or domain name for the file server.
Firmware File
Prefix
The default setting is “Empty”. If configured, only the firmware with the matching
encrypted prefix will be downloaded and flashed into the phone. This option appeals
to service provider. End users don't need to fill in this option.
Firmware File
Postfix
The default setting is “Empty”. End users don't need to fill in this option.
Configure File
Prefix
The default setting is “Empty”. End users don't need to fill in this option.
Configure File
Postfix
The default setting is “Empty”. End users don't need to fill in this option.
mDNS Server
If set to “Yes”, the device allows mDNS to rewrite configure/firmware server. The
default setting is “Yes”.
DHCP Option 66
Override Server
The default setting is “No”. If set to “Yes”, the device will obtain IP address as well as
firmware upgrade server address via DHCP(configured via DHCP). The address will
override the path the “Firmware Server Path” specifies to fulfill auto deployment. The
upgrade will use force TFTP.
x-PDFDivision