User's Manual

GXV3240 User Manual
GXV3240 WEB GUI
Grandstream Co., Ltd
Software Version：1.0.0.11 Document Version：0.1
185
Disable MWI Indicator
Set up whether to disable LED MWI Indicator when there is a unread
message. The default setting is “No”.
Disable New Message
Indicator
If set to “Yes”, the indicator will be disabled when there is a new
message. The default setting is “No”.
Disable Contact or
Message Full Indicator
If set to “Yes”, the indicator will be enabled when the storage of
contacts or messages is full. The default setting is “No”.
Disable Indicator When
LCD is Off
If set to “Yes”, the indicator will be disabled when LCD is Off. The
default setting is “No”.
RJ9 Headset TX Gain
(dB)
The headphone volume setting controls the sent-out audio signal.
The default is “0”.
RJ9 Headset RX Gain
(dB)
The headphone volume setting controls the received audio signal.
The default is “0”.
3.5mm Earphone TX
Gain (dB)
3.5mm Earphone RX
Gain (dB)
Headset Type
Select Normal headset or EHS headset type.
Headset Key Mode
Users could select Default Mode or Toggle Headset/ Speaker.
Please refer to the user manual for details
1. Default Mode
When the phone is running in idle screen, press the hardkey
HEADSET and off hook to dial. The headset icon will be displayed on
top of the calling interface.
Press the hardkey HEADSET and off hook to speak via headset if
there is an incoming call.
Press the hardkey HEADSET to hang up the call if the user is
speaking via the headset during an active call.
Press the hardkey HEADSET to switch to the headset if the user is
speaking via speaker or handset. Press the hardkey HEADSET
again to hang up the phone. Press the hardkey HEADSET
/SPEAKER to switch to the previous calling mode.
2. Toggle Headset/Speaker
When the phone is running in idle screen, Press the hardkey
HEADSET to enter the headset mode and the screen will display the
x-PDFDivision