User's Manual

GXV3240 User Manual
UPGRADING AND PROVISIONING
Grandstream Co., Ltd
Software Version：1.0.0.11 Document Version：0.1
192
Figure 165 Select Firmware File
2. The pop-up dialog will show on screen, users could confirm to update according to the prompt.
MANUAL UPDATE
The steps to update file via HTTP are the same as via TFTP. Theis chapter will take via TFTP as an
example.
1. Go to Maintenance>Upgrade, Select “No” in “ Automatic Upgrade” ,as shown in figure 165.
Figure 166 Set up Auto Update
2. Go to Maintenance>Upgrade, Select “Always Check at Bootup” in “Automatic Upgrade Rule”
option, as shown in figure 166.
Figure 167 Set up Automatic Upgrade Rule
3. Set up upgrade mode and upgrade server. Select “TFTP”in “Upgrade Via”option and input the
local TFTP server address in the “Firmware Server Path” option. URL and IP address are
optional. See figure 167.
Figure 168 Set up Firmware update Mode
x-PDFDivision