User's Manual
Table Of Contents
- DOCUMENT PURPOSE
- GNU GPL INFORMATION
- CHANGE LOG
- WELCOME
- PRODUCT OVERVIEW
- GXV3240D LCD SETTINGS
- GXV3240D WEB GUI SETTINGS
- ACCESS GXV3240D WEB GUI
- SAVING CHANGES
- DEFINITIONS
- TOOLBAR
- STATUS PAGE DEFINITIONS
- ACCOUNT PAGE DEFINITIONS
- ADVANCED SETTINGS PAGE DEFINATIONS
- MAINTENANCE PAGE DEFINATION
- MAINTENANCE/NETWORK SETTINGS
- MAINTENANCE/WI-FI SETTINGS
- MAINTENANCE/TIME SETTINGS
- MAINTENANCE/WEB/SSH ACCESS
- MAINTENANCE/UPGRADE
- MAINTENANCE/SYSLOG
- MAINTENANCE/LOGCAT
- MAINTENANCE/DEBUG
- MAINTENANCE/LANGUAGE
- MAINTENANCE/TR-069
- MAINTENANCE/CONTACTS
- MAINTENANCE/LDAP BOOK
- MAINTENANCE/BROADSOFT
- MAINTENANCE/DEVICE MANAGER
- UPGRADING AND PROVISIONING
- FACTORYRESET
- EXPERIENCING THE GXV3240DAPPLICATION PHONE
Firmware Version 1.0.1.54
GXV3240D Administration Guide
Page 20 of 83
For more information about how to use Wi-Fi on the GXV3240D, please refer to the following link:
http://www.grandstream.com/products/gxv_series/GXV3240D/documents/GXV3240D_wifi_guide.pdf
BLUETOOTH SETTINGS
Tap on "Bluetooth" to turn on/off Bluetooth connection. By default it's turned off.
Tap on "Bluetooth Settings" to set up and manage Bluetooth connections. This option is available
only when Bluetooth is turned on.
Figure 1: GXV3240D Bluetooth Settings
Visibility. Tap on "GXV3240D" on the top of the above screen to switch visibility status of the
phone via Bluetooth. Normally you would need turn it on during pairing process so that other
Bluetooth devices can discover the GXV3240D.
Visibility timeout. Press MENU button and select "Visibility timeout". Tap to select the
timeout interval among "2 minutes", "5 minutes", "1 hour" or "never". By default, the visibility
timeout is 2 minutes.
Rename phone. Press MENU button and select "Rename phone" to change the name of
the GXV3240D, which is displayed on other Bluetooth devices when discovered. By default, it's
"GXV3240D" as shown on the top of the Bluetooth settings screen.