User's Manual
Table Of Contents
- DOCUMENT PURPOSE
- GNU GPL INFORMATION
- CHANGE LOG
- WELCOME
- PRODUCT OVERVIEW
- GXV3240D LCD SETTINGS
- GXV3240D WEB GUI SETTINGS
- ACCESS GXV3240D WEB GUI
- SAVING CHANGES
- DEFINITIONS
- TOOLBAR
- STATUS PAGE DEFINITIONS
- ACCOUNT PAGE DEFINITIONS
- ADVANCED SETTINGS PAGE DEFINATIONS
- MAINTENANCE PAGE DEFINATION
- MAINTENANCE/NETWORK SETTINGS
- MAINTENANCE/WI-FI SETTINGS
- MAINTENANCE/TIME SETTINGS
- MAINTENANCE/WEB/SSH ACCESS
- MAINTENANCE/UPGRADE
- MAINTENANCE/SYSLOG
- MAINTENANCE/LOGCAT
- MAINTENANCE/DEBUG
- MAINTENANCE/LANGUAGE
- MAINTENANCE/TR-069
- MAINTENANCE/CONTACTS
- MAINTENANCE/LDAP BOOK
- MAINTENANCE/BROADSOFT
- MAINTENANCE/DEVICE MANAGER
- UPGRADING AND PROVISIONING
- FACTORYRESET
- EXPERIENCING THE GXV3240DAPPLICATION PHONE
Firmware Version 1.0.1.54
GXV3240D Administration Guide
Page 34 of 83
GXV3240D WEB GUI SETTINGS
TheGXV3240Dembedded Web server responds to HTTP/HTTPS GET/POST requests. EmbeddedHTML
pages allowusersto configure the application phone through a Web browser such as Microsoft’s IE, Mozilla
Firefox, Google Chrome and etc.
ACCESS GXV3240D WEB GUI
The GXV3240DWeb GUIURLishttp://Phone-IP-Address,where the Phone-IPAddressis the IP
addressdisplayed on the GXV3240Ddesktop account widget.
Figure 12: GXV3240D Main Screen - IP Address
To access the GXV3240D Web GUI:
1. Connect the computer to the same network as the phone.
2. Make sure the phone is turned on and shows its IP addresson the account widget of the desktop.
3. Opena Web browser on your computer.
4. Enter the phone’s IP address in the address bar of the browser.
5. Enter the administrator’s login and password to access the Web Configuration Menu. The default login
name and password for the administrator is "admin" and"admin".The default loginname and password
for the end-user is "user" and "123".
Note:
Thecomputer has to be connected to the same sub-network as the phone. This can be easily done by
connecting the computer to the same hub or switch as the phone connected to. In absence of a
hub/switch (or free ports on the hub/switch), please connect the computer directly to the PC port on the