User's Manual
GXV3615 IP Camera Series
Firmware 1.0.4.8 Page18of 30
Grandstream Networks, Inc. 11/29/10
SIP User ID ± User account
information provided by your service
provider (ITSP); this is either an
actual phone number or is formatted
like one.
Authenticate ID ± The SIP service
VXEVFULEHU¶V$XWKHQWLFDWH,'XVHG
for authentic ation. It can be identical
to or different from the SIP User ID.
Authenticate Password ± The SIP
VHUYLFHVXEVFULEHU¶VDFFRXQW
password for the GXV to register to
the SIP server of the ITSP.
STUN Server ± If the device is behind a router, a STUN server is needed to help
penetrate the NAT.
Stream ± To choose between Primary and Secondary stream.
Preferred Vocoder ± To choose different Vocoder type.
Registration Expiration ± This parameter allows users to specify the time frequenc y (in
minutes) in which the GXV refreshes its registration with the specified registrar. The
default interval is 60 minutes.
Local SIP Port ± This parameter defines the local SIP port used to listen and transmit.
The default value is 5060.
Local RTP Port ± This param eter defines the local RTP-RTCP port pair that is used to
listen and transmit. The default value is 5004.
5. Clic k Save to save all the c hanges. You need to restart the devic e to apply all changes.
Configure Phone List
To make sure the GXV3615 can make phone calls to the number you preferred w hen alarm is
triggered. You need to add num ber to the phone list.
Steps to add phone number:
1. From the GXV3615 home page, click Basic Settings > SIP.
2. Go to Phone List Tab.
3. Enter the Phone number and name, click Add a N umber to save all the changes.
4. Numbers added to the s ystem will be listed in this page.