User's Manual

GXV3615 IP Camera Series
Firmware 1.0.4.8 Page2of 30
Grandstream Networks, Inc. 11/29/10
Safety Instructions
These instructions are intended to assist users with the operation of the GXV3615 and also to
instruct on how to avoid dangerous situations or damage to the device.
Warnings: Serious injury or death may be caused if any of the warnings below are neglected.
Cautions: Injury or damage to the equipment may occur if any of the following caution
messages are neglected.
Warnings Follow these safeguards to prevent
serious injury or death.
Cautions Follow these precautions to
prevent potential injury or material
damage.
Warnings:
Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power
Source with DC 12V according to the IEC60950-1 standard. Please refer to the technical
specifications for more details.
Do not use a third-party power adapter or power cord
When the device is installed on the wall or c eiling, make sure that it is firm ly attached.
Notice
˖
Make sure that the power supply voltage is correct before using the cam era.
Do not drop the device or expose it to physical shock.
Do not expos e the device to tem peratures outside the range of -10
o
C to +60
o
C when the
device is in operation.
Do not expos e the device to damp/w et conditions or high electromagnetism radiation.
To avoid heat accumulation, make sure that your operating environment has proper
ventilation.
Do not attempt to open, disassemble, or modify the device
A few parts (e.g. electrolytic capacitor) of the equipm ent s hall be replaced regularly according
to their average life tim e. The average life time varies from the differences b etween operating
environments and usage history. Regular m aintenance checks are recommended for all
users. Pleas e contact your dealer for more details.