User's Manual

GXV3615 IP Camera Series
Firmware 1.0.4.8 Page22of 30
Grandstream Networks, Inc. 11/29/10
From E-Mail Address ± The email address that s ends out the alarm em ail(s).
To E-Mail Address ± The em ail addresses that the alarm em ail(s) will be sent to. You can
have up to 3 emails configured.
User Name/ Password ± The user name and password required to log in to your SMTP
server, for example, [e-mail]/123.
SSL ± Checked if the SMTP server requires a secure connection.
Test Email Account Settings ± Click the Test button to send a test email from the From
E-Mail to the To E-Mail to m ake sure that SMTP is configured properly. If the receiver can get
the test email, then the SMTP s ettings are ready to go.
GXV3615 Series FTP Page
The FTP s erver is used to store video files if you configure the GXV3615 to rec ord video and
upload it to the FTP server when an alarm event or motion detection is triggered.
FTP Settings
Enable FTP ± 7KHGHIDXOWVHWWLQJLV³1R´LI\RXZDQWWKH*;93615 to upload the recorded
YLGHRWRWKH)73VHUYHUZKHQDQDODUPLVWULJJHUHGVHWWKLVILHOGWR³<HV´
FTP Server ± The IP address or hostname
of the SMTP server, ie. ftp.m yserver.com
.
FTP Server Port ± The port that your FTP
server is using.
User Name / Password ± The us er name
and password required to log into your
FTP server
Path ± The directory in the FTP server
where rec orded video will be uploaded.
Test FTP Account Settings ± Clic k the
Test button to upload a sample file to m ake
sure that FTP is properly configured.
GXV3615 Series Motion Detection Page
The GXV3615 supports Motion Detection. To utilize this feature, please follow the below
steps:
1. Setup the motion detection monitored area.
2. Configure the motion detection time schedule.
3. Configure alarm action properly.
Setup Motion Detection Monitored Area