User's Manual

GXV3615 IP Camera Series
Firmware 1.0.4.8 Page23of 30
Grandstream Networks, Inc. 11/29/10
Enable Motion Detection ± If this option is selected, motion detection will be enabled. If
something/somebody moves in the m otion detection region, an alarm will be triggered.
Show Motion Detection Regions ± If
this option is selected, the motion
detection regions will be displayed on
the screen with a white border.
To Edit a Monitored Area
1. In the Select a Region dropdown list, select
the region ID .
2. Click Edit.
3. Click on the video, drag and draw you
preferred area.
4. Set the Sensitivity. Click the Save button to
save the sensitivity.
NOTE:The Sensitivity value varies from 0 to
100. The larger the value is, the higher the
sensitivity.
5. Click Save to save the settings.
To Remove a Monitored Area
1. In the Select a Region dropdown list, select the region you would like to remove.
2. Click Remove.
3. Click Save to save the changes.
Configure Motion Detection & Alarm Actions
An alarm action is what the GXV3615 is going to do
when an alarm is triggered during the defined tim e
period ± the time schedule. The GXV3615 allows
multiple alarm actions.
Button to save sensitivity only
The white border for Motion
Detection Regions
NOTE: If Upload to Alarm center
is checked for Alarm Actions, the
white border will flash red when a
motion detection alarm is triggered.