User's Manual

GXV3615WPI_HD IP Camera Series
Firmware 1.0.4.8 Page 17 of 30
Grandstream Networks, Inc. 02/10/12
Set up DDNS
1. Apply for a domain name from your service provider.
2. Login to the web configuration page, click Basic Settings > DDNS.
3. Enter the required information
DDNS Active – If you want to use
DDNS, please set this field to
“Enabled” .
DDNS ISP Type – Select your
DDNS ISP Type.
Self-Define DDNS Address –
Self-define the DDNS server
instead of using DDNS ISP Type.
Site Name – The DDNS name for
your device.
DDNS Account/ DDNS Password – The account and password from the DDNS
Provider.
STUN Server – If the device is behind a router, a STUN server is needed to help
penetrate the NAT.
4. Click Save to save the changes. You might need to reboot the device to apply all the
changes.
GXV3615WPI_HD Series SIP Page
The GXV3615WPI_HD has the ability to receive phone calls and make phone calls when an
alarm event is triggered through motion detection or alarm input. Register the
GXV3615WPI_HD to a SIP server to enable the product to make and receive phone calls.
To make outgoing phone calls out, the user needs to configure the Phone List properly.
Register GXV3615WPI_HD to a SIP Server
1. From the GXV3615WPI_HD home page, click Basic Settings > SIP.
2. Go to SIP Settings Tab.
3. General Phone Settings.
Registered – The field shows the registration
status of the account with the SIP server.
Unregister On Reboot – If it’s checked, the SIP user’s registration information will be
cleared from the server when the phone reboots.
4. Enter the required information.
Account Name – The field configures the SIP account name.
SIP Server – The SIP Server’s IP address or Domain name provided by your service
provider.
Outbound Proxy – The IP address or Domain name of the Outbound Proxy, Media