User's Manual

GXV3615WPI_HD IP Camera Series
Firmware 1.0.4.8 Page 22 of 30
Grandstream Networks, Inc. 02/10/12
port 465, which is for SMTP with an encrypted connection.
From E-Mail Address – The email address that sends out the alarm email(s).
To E-Mail Address – The email addresses that the alarm email(s) will be sent to. You can
have up to 3 emails configured.
User Name/ Password – The user name and password required to log in to your SMTP
server, for example, [e-mail]/123.
SSL – Checked if the SMTP server requires a secure connection.
Test Email Account Settings – Click the Test button to send a test email from the From
E-Mail to the To E-Mail to make sure that SMTP is configured properly. If the receiver can get
the test email, then the SMTP settings are ready to go.
GXV3615WPI_HD Series FTP Page
The FTP server is used to store video files if you configure the GXV3615WPI_HD to record
video and upload it to the FTP server when an alarm event or motion detection is triggered.
FTP Settings
Enable FTP – The default setting is “No,” if you want the GXV3615WPI_HD to upload the
recorded video to the FTP server when an alarm is triggered, set this field to “Yes.”
FTP Server – The IP address or hostname
of the SMTP server, ie. ftp.myserver.com.
FTP Server Port – The port that your FTP
server is using.
User Name / Password – The user name
and password required to log into your
FTP server
Path – The directory in the FTP server
where recorded video will be uploaded.
Test FTP Account Settings – Click the
Test button to upload a sample file to make
sure that FTP is properly configured.
GXV3615WPI_HD Series Motion Detection Page
The GXV3615WPI_HD supports Motion Detection. To utilize this feature, please follow the
below steps:
1. Setup the motion detection monitored area.
2. Configure the motion detection time schedule.
3. Configure alarm action properly.