Security Camera User Manual

GXV3651_FHD IP Camera
Firmware 1.0.1.32 Page 30 of 36
Grandstream Networks, Inc. 06/2011
GXV3651_FHD Motion Detection Page
The GXV3651_FHD supports Motion Detection. To utilize this feature, please follow the steps
below:
1. Setup the motion detection monitored area.
2. Configure the motion detection time schedule.
3. Configure alarm action properly.
Setup Motion Detection Monitored Area
Enable Motion Detection – If this option is selected, motion detection will be enabled. If
something/somebody moves in the motion detection region, an alarm will be triggered.
Show Motion Detection Regions – If
this option is selected, the motion
detection regions will be displayed on
the screen with a white border.
The white border for Motion
Detection Regions
NOTE: If Upload to Alarm center
is checked for Alarm Actions, the
white border will flash red when a
motion detection alarm is triggered.