GXV 3662 IP CAMERA Grandstream Networks, Inc. 1297 Beacon Street, 2nd Floor Brookline, MA 02446, USA Tel : +1 (617) 566 – 9300 Fax: +1 (617) 247 – 1987 深圳市南山高新科技园中区 科发路2号1栋(朗峰大厦)5楼 电话: +86 755-2601-4600 传真: +86 755-2601-4601 www.grandstream.com www.grandstream.cn For Warranty and RMA information, please visit www.grandstream.
Content English.....................................................1 Español.................................................. 13 Français................................................. 25 简体中文 ................................................
EN PRECAUTIONS • Do not attempt to disassemble, or modify the device • Do not use a third party power adapter • Do not expose this device to temperatures outside the range of -20 °C to +60 °C • Do not expose the GXV3662 to environments outside of the following humidity range: 10-90% RH (non-condensing) GXV3662 Indicators and Connectors IR-CUT Filter Internal Temperature Regulator Lens PACKAGE CONTENTS V 12 GXV3662 Power Adapter SD Card Slot Power Port x3 x3 Tool Set Reset Button Network Port Al
Installation Lens Adjustment Step 1: Take out the 3 screws on the housing. Use the tool comes with the package. Step2: Open the cover. 1 2 Cable Cable Cable Cable Step3: Attach the alighment sticker onto the surface. Step4: Drill 3 holes at the place where the mounting holes ) and hammer the 3 plastic anchors into the holes. are ( Then, insert the screws. Feed the cables through the cable hole. 1. Adjust the lens VERTICALLY: - Loosen the screws on both sides of axle.
CONNECTING THE GXV3662 GXV3662 CONFIGURATION Configuring the GXV3662 using Microsoft Internet Explorer Connect the GXV3662 to the DHCP server Network Port Power Port Step 1: Navigate your browser to: http://www.grandstream.com/support/gxv_ series_surveillance/general/resources/gs_search.zip Step 2: Run the Grandstream GS_Search tool, that you Option A-Power over Ethernet(PoE) When using a PoE switch,plug an RJ45 Ethernet cable into the network port.
Step 5: Open Microsoft Internet Explorer on your PC. Type in the IP in the address bar. Step 6: A pop-up window will appear with prompts for a user name and password. The default administrator user name and password are both set to “admin” at the default factory configuration. Step 7: Once you log into the GXV3662’s web interface Internet Explorer will indicate that “This website wants to install the following add-on: ‘GSViewer. cab’ from Grandstream Networks, Inc.
Step 9: Click through the menu on the left hand side of the web UI for more advanced configuration parameters. Connect the GXV3662 using Static IP Step 3: Open Microsoft Internet Explorer on your PC. Type 192.168.1.168 in the address bar. Step 4-7: Please refer to Step 6-9 on Page 7. If the camera does not get an response from the DHCP server after 3 minutes, it can be accessed by the default IP 192.168.1.168 Step 1: Connect your PC and the GXV3662’s to the same network.
GXV3662 SAMPLE CONNECTION DIAGRAM ~11~ GXV3662 LENS SPECIFICATIONS Lens Format 1/3-Inch Image Sensor 1/3-Inch CMOS Focal Length 3.3mm-12mm Aperture Ratio F1.6-F3.2 View Angle D: 125.7°- 29.9° H: 89.8°-23.9° V: 63.6°-17.
ES PRECAUTIONS Indicadores y conectores del • No intente abrir, desarmar o modificar la unidad • No use un adaptador de corriente de otra marca • No exponga esta unidad a temperaturas fuera de este rango:-20 °C to +60 °C •No exponga esta unidad a condiciones húmedas fuera del rango de 10 a 90% RH (no condensadas) GXV3662 Filtro IR-Cut Regulador interno de temperatura Lente Contenido Ranura de tarjeta SD V 12 GXV3662 Adaptador de corriente Puerto de corriente x3 x3 Set de herramientas Boton de r
Instalación Ajuste del lente Paso 1: Retire los 3 tornillos del chasis. Utilice la herramienta incluida. Paso 2: Retire el domo. 1 2 Cable Cable Cable Cable Paso 3: Pegue el sticker de alineamiento en la superficie . Paso 4: Taladre 3 agujeros en el lugar donde estan los ) y martille los 3 tarugos de orificios de montura ( plástico en los agujeros. Luego inserte los tornillos. Ingrese los cables por el orificio para cables. 1.
Conexión del GXV3662 Configuración del GXV3662 Configure el GXV3662 usando el Explorador Internet de Microsoft Conecte el GXV3662 al servidor DHCP Puerto de Red Puerto de corriente Paso 1: Navegue su explorador hacia: http://www.grandstream.com/support/gxv_ series_surveillance/general/resources/gs_search.zip Paso 2: Ejecute la herramienta GS_Search de Grand stream que acaba de bajar. Opción A - Corriente sobre ethernet (PoE) Cuando use un switch PoE, inserte un cable de ethernet RJ45 al puerto de red.
Paso 5: Abra Microsoft Internet Explorer en su PC. Ingrese la dirección IP en la barra de direcciones. Paso 6: Una ventana aparecerá en donde deberá ingresar el nombre de usuario y la contraseña. De fabrica el nombre de usuario de administrador y la con traseña son ambos admin. Paso 7: Luego de ingresar a la pagina web, su explorador le indicara que “ Esta página quiere instalar el siguiente add-on: GSViewerX.cab desde “Grandstream Networks Inc.”. Instale el add-on siguiendo las instrucciones.
Paso 9: Para mas configuraciones vaya al menú principal a la izquierda. Paso 3: Abra su explorador de Internet Microsoft. Coloque 192.168.1.168 en la barra de dirección. Conecte la GXV3662 usando una dirección IP estática. Paso 4-7: Por favor referirse a los pasos 6-9 en la página 19. Si la cámara no recibe respuesta del servidor DHCP después de 3 minutos, se puede ingresar usando la IP de fabrica 192.168.1.168 Paso 1: Conecte su PC y el GXV3662 a la misma red. Paso 2: Coloque la IP de su PC en 192.168.
GXV3662 Diagrama de Conexion ~23~ GXV3662 Especificaciones del Lente Formato del lente 1/3-Inch Sensor de imagen 1/3-Inch CMOS Distancia focal 3.3mm-12mm Radio de apertura F1.6-F3.2 Angulo de visualización D: 125.7°- 29.9° H: 89.8°-23.9° V: 63.6°-17.
FR PRECAUTIONS Indicateurs et connecteurs • Ne pas tenter de désassembler ou de modifier le dispositif • Ne pas utiliser un adaptateur d’alimentation tiers • Ne pas exposer cet appareil à des températures hors de la plage de -20 °C à +60°C • Ne pas exposer le GXV3662 à un environnement avec humidité hors de la plage de 10-90% RH (sans condensation) du GXV3662 Régulateur de température interne Filtre IR Lentille CONTENU DU PACK V 12 GXV3662 Boitier d’alimentation Fente pour carte SD x3 x3 Port d’
Installation Réglages de la lentille Etape 1: Retirez les 3 vis du boîtier. Utilisez l’outil fourni avec le pack. Etape 2: Dévissez le boîtier. 1 2 Câble Câble Câble Câble Etape 3: Fixez l’autocollant d’alignement sur la surface. 1. 1. Régler la lentille VERTICALEMENT: - Desserrez les vis des deux côtés de l’axe. - Réglez la lentille à la position désirée. Plage de réglage admise est 0 ° ~ 160 °. - Serrez les vis pour terminer l’ajustement.
CONNEXION DU GXV3662 La Configuration du GXV3662 Configurer le GXV3662 en utilisant le navigateur Microsoft Internet Explorer Configurer le GXV3662 à un serveur DHCP Port Réseau Port d’alimentation Option A-Power over Ethernet(PoE) Lorsque vous utilisez un switch PoE, branchez un câble Ethernet RJ45 dans le port réseau. Insérez l’autre extrémité dans un port Ethernet pré-alimenté du switch. Etape 1: Accédez à ce lien dans votre navigateur: http://www.grandstream.
Etape 5: Ouvrez Microsoft Internet Explorer sur votre PC. Saisissez l’adresse IP trouvée à l’étape 4 dans la barre d’adresse. Etape 6: Une fenêtre pop-up apparaîtra avec invite à entrer un nom d’utilisateur et un mot de passe. Le nom d’utilisateur et le mot de passe administrateur par défaut sont définis sur “admin” à la configuration d’origine par défaut. Etape 7: Après avoir accédé à la page Web de votre GXV3662, IE indique que “Ce site veut installer l’add-on GSViewerX.cab de Grandstream Networks Inc.
Etape 9: Pour plus de paramètres, Veuillez aller sur le menu principal sur le côté gauche. Etape 3: Ouvrez le navigateur Microsoft Internet Explorer et tapez 192.168.1.168 dans la barre d’adresse. Connecter le GXV3662 en utilisant une adresse IP statique Etape 4-7: Référez-vous SVP aux étapes 6-9 à la page 31. Si la caméra ne reçoit pas de réponse du serveur DHCP au bout de 3 minutes, vous pouvez y accéder par l’adresse IP par défaut 192.168.1.
Exemple de Diagramme de connexion du GXV3662 ~35~ Spécifications de la lentille du GXV3662 Format de la lentille 1/3-Inch French: Capteur d’image 1/3-Inch CMOS Distance focale 3.3mm-12mm Rapport d’ouverture F1.6-F3.2 Angle de vue D: 125.7°- 29.9° H: 89.8°-23.9° V: 63.6°-17.
GXV3662接口指示 注意事项 • 请不要拆卸或修改该设备 • 请不要使用第三方的电源适配器 • 请不要在超出-20至60摄氏度的环境下使用 此设备 • 请不要将GXV3662暴露在超出相对湿度1090%范围外的环境下 包装内容 内部温度调节器 镜头 SD卡槽 V 12 GXV3662 IR-CUT红外滤 光片 12V DC 电源 电源接口 x3 x3 配套工具 恢复出厂按钮 网络接口 报警输入输出/ 音频输入输出 校准贴纸 接线端子 ~37~ 快速入门指南 ~38~
安装步骤 调节镜头 步骤1:首先使用随附的螺 丝起子将三颗螺丝旋松。 步骤2:取下基座上的半球 型外壳。 1 乧亮 乧亮 乧亮 乧亮 步骤3:将随附的校准贴纸贴在天花板或墙壁上。 步骤4:依照贴纸上的三个圆圈钻出导孔,然后 将随附的塑料锚钉敲入导孔中。并以螺丝固定底 座。将电线穿过侧面或底部的导孔。 步骤5:调节镜头(参考第40页)。 2 1.垂直调节: - 松开两侧的螺丝。 - 转动镜头模块到所需的位置,允许的调整范围 为0°~160°。 - 完成后,拧紧螺丝。 2.
GXV3662 连接方法 GXV3662 配置 连接GXV3662到DHCP服务器环境下,GXV3662默认 通过DHCP获取IP地址 步骤1: 通过浏览器访问地址下载IP搜索工具 网络接口 电源接口 http://www.grandstream.com/support/gxv_ series_surveillance/general/resources/gs_search.
步骤5: 打开IE浏览器,在地址栏输入搜索到 的设备IP地址。 步骤6: 界面将会跳出输入用户名及密码 的验证框, 出厂时默认的用户名和密 码均为:admin 步骤7: 登录到GXV3662网络界面后, IE浏 览器将提示您“此站点可能需要下列 ActiveX控件:来自‘Grandstream Networks Inc’的‘grandstream’.
步骤 9: 点击网络用户界面左侧的菜单进行更 多的高级配置。 通过默认的静态IP地址访问 如果将GXV3662置于非DHCP环境下或者GXV3662 未从DHCP服务器得到响应3分钟之,GXV3662将 可以使用默认的静态IP地址:192.168.1.168访 问。 步骤1: 将您的PC与GXV3662通过双绞线相连, 或将您的PC与GXV3662接入同一网段; 步骤2: 将您的PC的IP地址设置为192.168.1.X 将子网掩码设置为255.255.255.0。如 下图所示: 步骤3: 打开微软的IE浏览器,在IE地址栏中输 入GXV3662的出厂默认IP地址 192.168.1.168; 步骤4:请参考第43頁中步驟6-9 注意:请下载用户手册和常见问题解答,以取 得更详细的配置说明。下载地址: http://www.grandstream.
GXV3662连接示意图 ~47~ GXV3662摄像镜头参数(百万像素) 像面尺寸 感测器 焦距 通光孔径 1/3-Inch 视场角 D: 125.7°- 29.9° H: 89.8°-23.9° V: 63.6°-17.9° 光圈 DC Auto 最近物距 50cm IR-CUT红外滤光片 Yes 1/3-Inch CMOS 3.3mm-12mm F1.6-F3.