Grandstream Networks, Inc.
GXV3662 IP dome camera Series Safety Instructions These instructions are intended to assist users with the operation of the GXV3662 and also to instruct on how to avoid dangerous situations or damage to the device. Warnings: Serious injury or death may be caused if any of the warnings below are neglected. Cautions: Injury or damage to the equipment may occur if any of the following caution messages are neglected. Warnings Follow these safeguards to prevent serious injury or death.
GXV3662 IP dome camera Series Contents Welcome......................................................................................................................................................... 3 Package Contents............................................................................................................................................ 4 Product Overview.....................................................................................................................................
GXV3662 IP dome camera Series Welcome The GXV3662 Series is a next generation IP dome camera for remote monitoring and surveillance over your LAN or internet. The GXV3662 Series combines best in class IP video technology and SIP protocols for a robust IP surveillance solution. The product features H.264 video streams with up to 30 frames per second in full 720P, delivering rich image clarity at rapid transmission rates.
GXV3662 IP dome camera Series Package Contents Items in the package: GXV3662 IP dome camera 12V DC power Adapter Mount Stand Ethernet Cable Quick installation guide GXV3662 series includes 2 models: GXV3662_HD and GXV3662_HDIR. The difference between GXV3662_HD and GXV3662_HDIR: GXV3662_HD : Do not support IR_LED GXV3662_HDIR : Support IR_LED for low light environment. Product Overview GXV3662 Series Overview GXV3662 Inner view Firmware 1.0.4.8 Grandstream Networks, Inc.
GXV3662 IP dome camera Series Physical Description: 1） Heater and Fan 2） SD card slot 3） Reset button 4） General I/O Terminal Block 5） Ethernet 10/100 RJ45 Plug 6） Power socket 7） lens 8） IR-LED （GXV3662_HDIR only） Firmware 1.0.4.8 Grandstream Networks, Inc.
GXV3662 IP dome camera Series Installation Guide Minimum Recommended System Requirement • • • • Windows 2000 Server Professional, Windows XP, Windows Vista. CPU: Intel Pentium 4 or higher, 2 GHz. RAM: 1 GB (4 GB recommended for larger systems). Support for DirectX 8.0 and above. . Connect your GXV3662 Series Using the Power adapter as power supply • • • Connect an RJ-45 cable to the NETWORK port of the GXV3662. Connect the other end of the RJ-45 cable to your network or PC.
GXV3662 IP dome camera Series Configuring the GXV3662 Series via Web Browser The GXV3662’s embedded Web server responds to HTTP/HTTPS GET/POST requests. Embedded HTML pages allow you to configure your IP dome camera through Microsoft Internet Explorer. Access GXV3662 Series Web Configuration Menu Connect the Camera to DHCP server. 1. Navigate your browser to: http://www.grandstream.com/support/gxv_series_surveillance/general/resources/gs_ search.zip 2.
GXV3662 IP dome camera Series Connect to the Camera using Static IP. If the camera does not get response from DHCP server after 3 minutes, it can be accessed by the default IP 192.168.1.168. 1. Connect your PC to the same network as the GXV3662. 2. Configure the IP address of your PC to: 192.168.1.XXX (1
GXV3662 IP dome camera Series GXV3662 Series Home Web Page Figure1: Home web page of GXV3662 Items on GXV3662 Home Page 1 Motion Detection 2 Alarm Event 3 4 5 6 7 Language Control Console ZOOM FOCUS Default 8 9 10 11 12 SPEED BRIGHTNESS CONTRAST SATURATION View Size 13 Play If the motion detection alarm is triggered, the indicator will flash red. Click on the indicator to turn off the alarm. If an alarm event is triggered, the indicator will flash red.
GXV3662 IP dome camera Series 14 Capture 15 Record 16 17 18 19 Sound Off/On Talk Playback Config Captures the image displayed and saves it to C:\GS_Capture (default directory). Records the video and saves it to C:\GS_Record (default directory). Toggles the sound On or Off. Establishes two-way audio. Replays the saved video. Configures the Save Location for captured images and recorded videos. GXV3662 Series System Page This page allows you to configure the system settings on GXV3662.
GXV3662 IP dome camera Series Grandstream network cameras or digit video cameras in the same subnet. GXV3662 Series Video & Audio Page On Screen Display (OSD) Settings OSD Time/ Text – The time stamp and channel name displayed on the screen. Video Settings Preferred Video Codec – The GXV3662 supports the H.264 video codec. Resolution – The higher the resolution is, the better the video quality is, and higher bandwidth is required.
GXV3662 IP dome camera Series to show the incremental difference between each frame. I-frames are used to help keep the video looking normal. When intervals are shorter, the video quality is higher but uses more bandwidth. NOTE: The users might need to configure the Primary Stream and Secondary Stream properly.
GXV3662 IP dome camera Series addresses are recommended for the GXV3662 DNS Configuration There are two methods of DNS configuration on the GXV3662: 1. The GXV3662 can obtain the DNS server automatically 2. Users can configure their own preferred DNS server HTTP Port The GXV3662 supports user configured http ports. If the HTTP port is changed, the port number is needed to access the web GUI, for instance: http://192.168.1.168:8080.
GXV3662 IP dome camera Series 3. Enter the required information DDNS Active – If you want to use DDNS, please set this field to “Enabled” . DDNS ISP Type – Select your DDNS ISP Type. Self-Define DDNS Address – Self-define the DDNS server instead of using DDNS ISP Type. Site Name – The DDNS name for your device. DDNS Account/ DDNS Password – The account and password from the DDNS Provider. STUN Server – If the device is behind a router, a STUN server is needed to help penetrate the NAT. 4.
GXV3662 IP dome camera Series 5. SIP User ID – User account information provided by your service provider (ITSP); this is either an actual phone number or is formatted like one. Authenticate ID – The SIP service subscriber’s Authenticate ID used for authentication. It can be identical to or different from the SIP User ID. Authenticate Password – The SIP service subscriber’s account password for the GXV to register to the SIP server of the ITSP.
GXV3662 IP dome camera Series Available phone numbers NOTE: With current firmware, only the first phone number in the list will be called when an alarm is triggered. GXV3662 Series Status Page System Statistics System Statistics lists hardware and software information, for example, the part number, the software version, about the GXV3662. Hardware Version – This field contains the product’s hardware information. Part Number – This field contains the product part number information.
GXV3662 IP dome camera Series LAN default gateway of the GXV3662. DDNS Status – This field shows the status of DDNS. Camera Type This section shows the Lens information of GXV3662. The Lens type information contains the brand name, the size of image sensor, the resolution and so on. GXV3662 Series User Management Page All current users will be list in the User List section of this page. You can also add and remove users here. Existing User Name –The field lists all of the current users.
GXV3662 IP dome camera Series Firmware Upgrade and Provisioning Items Upgrade via – This field lets you choose the firmware upgrade method. The GXV3662 supports HTTP, HTTPS and TFTP. Firmware Server Path – The IP address or domain name of the firmware server (the location of the firmware files) . Automatic Upgrade Interval – Enter the frequency (in minutes) in which the HTTP/HTTPS/TFTP server will be checked for new firmware upgrades or configuration changes. Automatic Upgrade – The default setting is “No.
GXV3662 IP dome camera Series which is for SMTP with an encrypted connection. From E-Mail Address – The email address that sends out the alarm email(s). To E-Mail Address – The email addresses that the alarm email(s) will be sent to. You can have up to 3 emails configured. User Name/ Password – The user name and password required to log in to your SMTP server, for example, 123@gmail.com/123. SSL – Checked if the SMTP server requires a secure connection.
GXV3662 IP dome camera Series Setup Motion Detection Monitored Area Enable Motion Detection – If this option is selected, motion detection will be enabled. If something/somebody moves in the motion detection region, an alarm will be triggered. Show Motion Detection Regions – If this option is selected, the motion detection regions will be displayed on the screen with a white border.
GXV3662 IP dome camera Series multiple alarm actions. Configure Motion Detection Time Schedule This section allows you to configure the time during which the GXV3662 will monitor the motion detection. The GXV3662 not only can monitor your settings but also can take actions when the alarm is triggered. Monitored region Dropdown list for date Available time schedules GXV3662 Series System Log This page is used to set up the system log server path and system log level.
GXV3662 IP dome camera Series FCC Warnings This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
