User's Manual

Grandstream Networks, Inc.GXV3672_HD v2/FHD v2 / GXV3672_HD_36 v2/FHD_36 v2 User ManualPage 30 of 42
Firmware Version 1.0.2.12 Last Updated: 7/2013
FTP Settings Page (Upload Alarm)
This page allows user to configure FTP parameters to upload the alarm or video recording::
Figure 13: FTP Setting Page
 Enable FTP: When checked, built-in FTP client is enabled.
 FTP Server: IP or Domain name of FTP site or server
 FTP Server Port: TCP port for FTP server, default port number 21
 User Name: FTP server User ID
 Password: FTP server user password
 Path: Path in the server where upload files are stored.
NOTE:
 Click “Save” to save the FTP configuration information.
 Click “Test” after configuration, if setting is correct, a test FTP operation will be performed and
“Test successful!” yellow bar will display if the operation is successful.