Grandstream Networks, Inc. GXV3674_HD_VF/GXV3674_FHD_VF Outdoor Day/NightVari-focal HD IP Camera GXV3674_HD/FHD_VF User Manual Firmware Version 1.0.2.8 www.grandstream.com http://esupport.grandstream.
TABLE OF CONTENTS GXV3674_HD/FHD_VFUser Manual WELCOME.................................................................................................................................................... 4 SAFETY COMPLIANCES................................................................................................................................. 5 W ARRANTY..................................................................................................................................................
TABLE OF FIGURES GXV3674_HD/FHD_VFUSER MANUAL FIGURE 1: HOME PAGE OF GXV3674_HD/FHD_VF .................................................................................................... 14 FIGURE 2: WEB LANGUAGE SWITCH ............................................................................................................................. 15 FIGURE 3: SYSTEM SETTINGS PAGE ...............................................................................................................................
WELCOME Thank you for purchasing Grandstream’sGXV3674 series Outdoor Day/Night Vari-focal High Definition IP Camera, an innovative powerful weatherproof infrared next generation high definition network camera. Its advanced ISP (Image Sensor Processor) powered with state-of-the-art auto-exposure/auto-white-balance algorithm and a high quality lens, ensures high fidelity video quality that matches digital still camera color grade in a wide range of light environments.It features cutting edge H.
Safety Compliances These instructions areintended to assist users with the operation of the GXV3674_HD/FHD_VFand to instruct on how to avoid dangerous situations or damage to the device. Warnings: Cautions: Serious injury or death may be caused if any of the warnings below are neglected. Injury or damage to the equipment may occur if any of the following caution messages are neglected. Grandstream Networks, Inc. GXV3674_HD/FHD_VF User Manual Firmware Version 1.0.2.
Warranty If you purchased your GXV3674_HD/FHD_VFfrom a reseller, please contact the company where you purchased the device for replacement, repair or refund. If you purchased the product directly from Grandstream, please contact your Grandstream Sales and Service Representative for a RMA (Return Materials Authorization) number before you return the product. Grandstream reserves the right to remedy warranty policy without prior notification.
CONNECT YOUR GXV3674_HD/FHD_VF Equipment Package Contents The GXV3674_HD/FHD_VFpackage contains:(need modification of diagram and figure) GXV3674_HD/FHD_VF IP Camera 12V DC Universal Power Adaptor Ethernet Cable Hex Key and 3 Screws and Wall Anchors Quick Installation Guide Grandstream Networks, Inc. GXV3674_HD/FHD_VF User Manual Firmware Version 1.0.2.
Connecting the GXV3674_HD/FHD_VF Using the Power Adapter as power supply Connect the RJ-45 Ethernet cable to the NETWORK port of the GXV3674_HD/FHD_VF Connect the other end of the RJ-45 cable to your network (switch or router or PC) Connect the power supply to the DC 12V power jack on the back of the GXV3674_HD/FHD_VF Using PoE as power supply Connect the RJ-45 Ethernet cable to the NETWORK port of GXV3674_HD/FHD_VF Connect the other end of the RJ-45 cable to your PoE switch.
PRODUCT OVERVIEW GXV3674_HD/FHD_VFCamera 1. 2. 3. 4. 5. 6. Mounting Plate Top Shield Cover/Screw Adjustable Wire Shield Lens IR Light Array Light Sensor for IR-Cut Grandstream Networks, Inc. GXV3674_HD/FHD_VFMounting Plate Top metal cover (shielding direct light and rain, etc.) Adjustable cylinder for wiring shield 1/3”CMOS (1.2M for HD/3.1M for FHD) and Lens Infrared Light Array Light Sensor for mechanical IR-Cut switching GXV3674_HD/FHD_VF User Manual Firmware Version 1.0.2.
GXV3674_HD/FHD_VFSpecifications Table 1: GXV3674_HD/FHD_VFTechnical Specifications Model GXV3674_HD_VF GXV3674_FHD_VF Video Compression H.264, MJPEG Image Sensor Resolution 1/3”, 1.2 Megapixel 1/3”, 3.1 Megapixel Progressive Scan CMOS, Progressive Scan CMOS, 1280H x 960V 2048H x 1536V Image Sensor Sensitivity Day & night mode, exceptionally low noise levels and low-light sensitivity.Shutter: 1/10000– 1/30 second Focal Length 2.8 ~12 mm Aperture F1.
INSTALLATION GUIDE Minimum Recommended Computer System Requirement To install GXV3674_HD/FHD_VF, you have to have a computer, PC recommend. The minimum recommended PC system requirement listed below: Windows XP, Windows Vista, Windows 7 and Windows 8 CPU: Intel Pentium 4 or higher, 2 GHz RAM: 1 GB (4 GB recommended for larger systems) Support for DirectX 8.0 and above.
Connect the Camera to network with DHCP server (Recommended) The GXV3674_HD/FHD_VFby default enabled as DHCP client, it will automatically get IP address from the network with DHCP server running. User can know the IP address assigned to the camera from DHCP server log or using “SearchTool” from Grandstream GSurf_Pro free VMS software. 1. Download and install the GSurf_Pro software from Grandstream website: http://www.grandstream.com/products/tools/surveillance/gsurf_pro.zip 2.
Connect to the Camera using Static IP If no DHCP server in the network, or the camera does not get IP from DHCP server, user can connect the camera to a computer directly, using static IP to configure the camera. The default IP, if no DHCP server; or DHCP offer time out (3 minutes), is 192.168.1.168 1. Connect the computer RJ-45 via an Ethernetcable directly to the IP camera GXV3674_HD/FHD_VF. 2. Configure the computer using Static IP: 192.168.1.
GXV3674_HD/FHD_VF Home Web Page The Home Page of GXV3674_HD/FHD_VFshown as Figure 1: Figure 1: Home Page of GXV3674_HD/FHD_VF 1. 2. 3. 4. Control Console: ZOOM: FOCUS: PTZ SPEED/Default Button: “D” 5. 6. 7. 8. BRIGHTNESS: CONTRAST: SATURATION: Configuration: 9. Language: 10. Play/Stop: 11. Snapshot Capture: 12. Record: 13. Sound On/Off: 14. Talk: 15. Playback: 16. Local Configuration: 17. Motion Detection Alarm Indicator: Grandstream Networks, Inc. PTZ Console controller for ePTZ function.
GXV3674_HD/FHD_VFConfiguration & Language Page When click the “Configuration” tab, web pagewilllink to page to configure the related parameters of the GXV3674_HD/FHD_VF. There are two big categories of settings: Basic Settings and Advanced Settings. Details will be illustrated in the later Chapter. When click the “Language” tab, supported languages will be displayed in Figure 2. Click to select the related webpage display language.
BASIC SETTINGS EXPLANATION System SettingsPage This page allow user to configure the system settings of GXV3674_HD/FHD_VF. Figure 3: System Settings Page Current System Time: Display time current system is running at Set the System Time: Configure the time system is running. o Time Zone: Select from pull down menu the time zone unit located o Self-Defined Time Zone: Use the self-defined time zone for automatic daylight saving time adjustment.
Video & Audio Setting Page This page allows user to configure the video and audio related settings. Figure 4-1: Video & Audio Settings Page Grandstream Networks, Inc. GXV3674_HD/FHD_VF User Manual Firmware Version 1.0.2.
On Screen Display (OSD): Display time stamp and text on the video screen. o o o o OSD Text: OSD Position: Display Time: Display Text: Input text (to identify the camera) shown on the screen. Show the OSD in either top or bottom left position on screen. When checked, time stamp will display on video screen When checked, input text will display on video screen.
Audio Settings: o o Pull down to select Audio Codec: PCMU, PCMA, AAC supported. Audio can also be disabled via choice. Microphone Volume: Speaker Volume: Power Frequency: Slide to adjust microphone gain. Slide to adjust the speaker volume connected. Select correct local power frequency to avoid video flicking effect under fluorescence light condition. Default is Outdoor. NOTE: H.264 suggested if camera needs to be viewed via Internet. If MJPEG selected, reduce max. frame rate to min.
CMOS Settings Page This page allows user to adjust the CMOS parameters: Figure 5: CMOS Settings Page Flip: Iris Setting: Auto. Shutter Speed: Pull down to choose video flip, either vertical or horizontal or both. Pull down to choose: Mechanical Manual, DC Auto, and DC Manual. Default Camera Shutter Speed. There are 10 options, with Auto, 1/30, 1/60, 1/125, 1/250, 1/500, 1/1000, 1/2000, 1/5000 and 1/10000. Default Auto.
Networking Setting Page This page allows user to configure network related parameters: Figure 6: Networking Setting Page IP Address Configuration: Camera IP address configuration o Dynamically Associated via DHCP: Default setting, DHCP server assign IP to camera. o Statically Configured as: Static IP address configuration DNS Configuration: DNS server IP, must be configured correctly if using static IP. HTTP: Web access TCP port, default 80.
DDNS Settings Page This page allows user to configure dynamic DNS related parameters: Figure 7: DDNS Setting Page DDNS Active: Enable DDNS by check this field. DDNS ISP Type: Select the DDSN service provider from the pull-down menu list Self-Define DDNS Address: Input the self-defined DDNS address Site Name: DDNS site name DDNS Account: DDNS account name DDNS Password: DDNS password STUN Server: Stun server FQDN or IP.
SIP Setting Page This page allows user to configure SIP related parameters. GXV3674_HD/FHD_VF can be configured as SIP endpoint to call out when alarm trigged, or allow permitted number to call in to check the audio/video if Grandstream IP videophone used. Figure 8-1: SIP Setting Page SIP registration status. Display “Online” in Green, “Offline” in Red. If checked and server support,reboot camera will unbind all registration in same SIP account.
Steam: Which stream used for SIP call.
Status Page This page shows the GXV3674_HD/FHD_VF operation status: Figure 9: Status Page NOTE: When SIP account registered, the status will display “Online” in Green. When SIP account unregistered, the status will display “Offline” in Red, as below. Grandstream Networks, Inc. GXV3674_HD/FHD_VF User Manual Firmware Version 1.0.2.
ADVANCED SETTINGS EXPLANATION The supports all the traditional and advanced telephony features. User Management Page This page allows user to do user management: Figure 10: User Management Page Existing User Name: User Name: User Password: Confirm User Password: Privilege: Allow Anonymous Viewing: Grandstream Networks, Inc.
Maintenance Page This page allows user to maintain the camera: Figure 11: Maintenance Page Restart: Restore: When clicked, the camera will reboot or restart When clicked, the camera will be reset to factory default, wiping out all the configurations (except IP address) Firmware Upgrade and Provisioning: Upgrade via: Upgrade firmware via TFTP, HTTP or HTTPS Firmware Server Path: Server path holding the firmware Config Server Path: Server path holding the configuration file (auto provisioning)
SMTP Setting Page (Email Alarm) This page allows user to configure email client to send out email when alarmtrigged: Figure 12: SMTP Setting Page Enable SMTP: When checked, email client is enabled. SMTP Server: SMTP Email Server IP or Domain Name SMTP Server Port: Port number used by server to send email From Email address: The email address of alarm email sending from, usually client email ID To E-Mail address: The email address to receive the alarmed email, total 3 included.
NOTE: Click “Save” to save the email configuration information. Click “Test” after configuration, if setting is correct, a test email will send out and “Test successful!” orange bar will display like below Grandstream Networks, Inc. GXV3674_HD/FHD_VF User Manual Firmware Version 1.0.2.
FTP Settings Page (Upload Alarm) This page allows user to configure FTP parameters to upload the alarm or video recording:: Figure 13: FTP Setting Page Enable FTP: FTP Server: FTP Server Port: User Name: Password: Path: When checked, built-in FTP client is enabled. IP or Domain name of FTP site or server TCP port for FTP server, default port number 21 FTP server User ID FTP server user password Path in the server where upload files are stored.
Alarm Server Settings Page (Upload Alarm to supported VMS or HTTP Server) This page allows user to configure alarm HTTP server to upload alarms: Figure 14: Alarm HTTP Server Setting Page Server Name: URL: User Name: Password: The name of HTTP server or VMS system URL of the Server User ID from that Server Password for that User ID NOTE: Grandstream provide HTTP API to help third party companiesby using HTTP server or VMS to develop further solutions for their customers. http://www.
Motion Detection Configuration Page (Set Alarm) This page allows user to configure motion detection to trigger alarms: Figure 15-1: Motion Detection Configuration Page Enable Motion Detection: Show Motion Detection Regions: Select a Region: Sensitivity: Grandstream Networks, Inc. When checked, Motion Detection enabled.
Alarm Action: Record Video From…..: Voice Alarm to SIP Phone: Upload to Alarm Center: Upload to Alarm HTTP Server: Record Video and Upload…: Email and FTP upload JPEG: Allow user to configure how long pre/post alarm trigger moment, thevideo to be captured by the camera. When checked and SIP proxy configured and IPCam registered, SIP alarm call will be made to pre-configured number.
Syslog Settings Page (Troubleshooting) This page allows user to enable the Syslog to help troubleshooting problems: Figure 16: Alarm Server Setting Page Syslog Server: Syslog server IP or Domain Name Syslog Lever: Lever of syslog message sent to the syslog server: None, Debug, Info, Warning, Error. Grandstream Networks, Inc. GXV3674_HD/FHD_VF User Manual Firmware Version 1.0.2.
Software Upgrade Software upgrade can be done via either TFTP, HTTP or HTTPS. The corresponding configuration settings are in the ADVANCED SETTINGS configuration page. Software Upgrade via TTFP, HTTP or HTTPS This page allows user to configure firmware upgrade: Figure 17: Firmware Upgrade and Provisioning NOTE: Grandstream recommends end-user use the Grandstream HTTP server. Currently the HTTP firmware server isfirmware.grandstream.com.
Instructions for local firmware upgrade using TFTP server: 1. Unzip the file and put all of them under the root directory of the TFTP server. 2. Put the PC running the TFTP server and the device in the same LAN segment. 3. Please go to File -> Configure -> Security to change the TFTP server's default setting from "Receive Only" to "Transmit Only" for the firmware upgrade. 4. Start the TFTP server, in the phone’s web configuration page 5. Configure the Firmware Server Path with the IP address of the PC 6.
RESTORE FACTORY DEFAULT SETTING WARNING! Restoring the Factory Default Setting will DELETE all configuration information of the camera. Please BACKUP or PRINT out all the settings before approach to following steps. Grandstream will not take any responsibility if you lose all the parameters of setting or cannot connect to your VoIP service provider.
IP SURVEILLANCE FAQ 1. Whatisthedefault IPaddress of theGXV3674_HD/FHD_VF? A: Thedefault IPconfigurationisDHCP. 2. Why canI not view thelive videostreamin Microsoft InternetExplorer? A: Pleasedouble checkwhether the Grandstream Plug-in/Active-X isinstalledcorrectly. OnceyoulogintotheGXV3674_HD/FHD_VFwebinterface,InternetExplorerwill indicatethat this websitewantstoinstalltofollowingadd-on:GSViewer.cab‘ fromGrandstreamNetworks, Inc.Please install thisadd-onwhen promptedbyIE. 3.
6. Why doesIEindicate to install Grandstream Video Vieweradd-onaftera firmware upgrade? Theadd-onwasproperlyinstalledbeforethefirmwareupgrade process. Newfirmware willoftenupgradetheadd-onaswell.Towatchthelivevideostream,youmust install thenewestversion oftheadd-on. 7. Howdoyouwatchsecondaryvideostream? Logintothehomepageof theGXV3674_HD/FHD_VFwebGUI,clickPlaytowatchthevideostream. Towatchasecondaryvideostream,rightclickonthevideo,andselect SecondaryStreamon thepopupmenu.
14.WhytheIPaddressofthedeviceNOT resetwhenclicking the“Restore”button? The GXV3674_HD/FHD_VFcouldbeinstalledinareas thatarenoteasy toaccess. Forexample,it couldbeinstalledontheroofof abuildingorthe ceilingofanoffice. Thismakesit difficultto reinstallthedevice,thereforethe“Restore” functionwillnotcleartheIP address. 15.Why can’t thelivevideo streambeviewedusing amobile phoneorGSurf_Pro afterchangingthe HTTPPortofthedevice? MakesurethattheRTSP portofthedeviceissetto2000plustheHTTP Portnumber.
17.Tested PCdisplayadapters. DisplayAdapter TestResult SiS 650/651/740/661 FX/741/760Series Intel®82945R Express ChipsetFamily Worksnormally Worksnormally VIA/S3G UniChromeProIGP NIVDIAGeforce 7300GS SiS 661FX SiS MirageGraphics SiS 661 Series Intel®G33/G31Express SiS Mirage3Graphics SiS 661FX/GXMirageGraphics S3 GraphicsProSavageDDR(Microsoft Corporation) XGI Velari Z7/Z9/Z9S V1.08.
FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
