User's Manual

P a g e | 45
GXW42xx User Manual
Version 1.0.5.43
Syslog
Syslog Server
The IP address or URL of System log server. The server collects system
log information from the device.
Syslog Level
Select the GXW42XX to report the log level. Default is NONE. The level
is one of DEBUG, INFO, WARNING or ERROR. Syslog messages are
sent based on the following events:
1. product model/version on boot up (INFO level)
2. NAT related info (INFO level)
3. sent or received SIP message (DEBUG level)
4. SIP message summary (INFO level)
5. inbound and outbound calls (INFO level)
6. registration status change (INFO level)
7. negotiated codec (INFO level)
8. Ethernet link up (INFO level)
9. SLIC chip exception (WARNING and ERROR levels)
10. memory exception (ERROR level)
The Syslog uses USER facility. In addition to standard Syslog payload, it
contains the following components:
GS_LOG: [device MAC address][error code] error message
Example: May 19 02:40:38 192.168.1.14 GS_LOG:
[00:0b:82:00:a1:be][000] Ethernet link is up
Print SIP in Syslog
Enable or disable printing of full SIP messages in Syslog.
Save Syslog
Save Syslog to device. 3 rotate files save syslog. Each file could save at
maximum 3 MB
TABLE 9: ADVANCED SETTINGS
Ring Tones
System Ring Cadence
Configuration option for all FXS ports ring cadence for all incoming calls.
(Syntax: c=on1/off1-on2/off2-on3/off3; [...]) Default is set to
c=2000/4000; (US standards)