User's Manual

P a g e | 60
GXW42xx User Manual
Version 1.0.5.43
Anonymous Call Rejection
Default is No. If set to Yes, incoming calls with anonymous Caller ID will
be rejected with 486 Busy message.
Hunting Group Type
Linear and Circular. Linear style will sort the call to the lowest-numbered
available line, this is also called “serial hunting”. Circular style will
distribute the calls "round-robin". If a call is assigned to line 1, the next
call goes to 2 and the next to 3. The succession throughout each of the
lines continues even if one of the previous lines becomes available.
When the end of the hunt group is reached, the hunting starts over at
the first line. Lines are skipped if they are still busy on a previous call.
These two hunting styles can be configured from the Profile X page.
Hunting Group Ring Timeout
Default is 20 seconds. If call is not answered within this designated
time period, the call will be forwarded to the next member of a Hunt
Group.
Special Feature
Default is Standard. Choose the selection to meet some special
requirements from Softswitch vendors. Example of vendors - CBCOM,
RNK.
Call Features Settings
Enable Call Features
When enabled, Do not Disturb, Call Forward and other call features can
be used via the local feature code on the phone. Otherwise, the ITSP
feature code will be used.
Enable All will override all individual features enable setting.
Note: When call features on GXW42xx are enabled (UCF, DND...), if
picking up the
handset, GXW42xx play stutter tone to indicate that a call feature is
active then the dial tone will be played after that.
SRTP Feature
Default is Yes, and star code is Enable-16, Disable-17.
SRTP per call Feature
Default is Yes, and star code is Enable-18, Disable-19.
CID Feature
Default is Yes, and star code is Enable-31, Disable-30.
CID per call Feature
Default is Yes, and star code is Enable-82, Disable-67.
Direct IP calling Feature
Default is Yes, and active star code is 47.
CW Feature
Default is Yes, and star code is Enable-51, Disable-50.