User's Manual

P a g e | 8
GXW42xx User Manual
Version 1.0.5.43
Added option “Prefer Primary Outbound Proxyto enable registration through primary outbound proxy
if registration expires. [Prefer Primary Outbound Proxy]
Added feature “White list for WAN sideand Black list for WAN sidefor remote management. [Access
Control Lists]
Added feature Lockout time interval to change banning time after too many failed login attempts.
[Lockout Time Interval].
Added option “Web Access Modeto choose between “HTTPSand “HTTPto access device Web UI.
[Web Access Mode]
Added option “HTTPS Web Portto set HTTPS web port instead of using default web port. [HTTPS
Web Port]
Added local firmware upgrade support. [Upload Device Firmware]
Change “Disable Telnetoption to “Disable SSHoption for more security. [Disable SSH]
Firmware version 1.0.5.16
Added option [DTMF-RELAY Tag Respect SIP INFO] [Use Request Routing ID in SIP Headers] for
Profile 1-4 audio settings.
Added the option of [Crypto Life Time] to support RTP settings.
Added option [Play busy/reorder tone before Loop Current Disconnect] for Profile 1-4 audio settings.
Added the option of [Disable Connected Line ID] to support not display the connected line ID.
Added the option of [Flash Digit Control] [Crypto Life Time] to overrides the default settings for call
control.
Added option to configure [Local RTP port].
Added the option to configure [SIP Registration Failure Retry Wait Time upon 403 Forbidden].
Added the option to enable/disable [Hold Target Before Refer].
Added the option to enable/disable [Authenticate server certificate domain].
Added the option to enable/disable [Authenticate server certificate chain].
Added the option to configure [Trusted CA]
Added the function of [Automatic Reboot].
Added the option to [Allow DHCP Option 42 to NTP Server] to support Time and Date settings.
Added the option to [Allow DHCP Option 2 to override time zone] to support Time and Date settings.
Added the option to enable/disable [3CX Auto Provision] to support multicast SUBSCRIBE for provision.
Firmware version 1.0.5.8
Added option [SIP REGISTER Contact Header Uses] [Use Request Routing ID in SIP Headers] for
Profile 1-4 to support NAT transfer feature.