User's Manual

P a g e | 9
GXW42xx User Manual
Version 1.0.5.43
Firmware version 1.0.5.5
• Added option [Enable Fast RFC2833] to set DTMF duration by RFC2833.
• Added SNMP support. Added [SNMP] section.
• Added QoS settings for SIP and RTP packets. Rearranged options [Layer 2 QoS Settings] and [Layer
3 QoS Settings].
• Added star code [*98] to play registration ID
• Added star code [*99] to trigger provisioning process.
• Added support to download device configuration file.
Firmware version 1.0.4.22
• Added support for audio codec G.722
• Added option [Always send HTTP Basic Authentication Information] to enable sending HTTP
authentication without server challenge
• Added the options to enable/disable [Use P-Preferred-Identity Header] and [Use Privacy Header]
• Added the options to enable/disable [Do Not Escape '#' as %23 in SIP URI]
Firmware version 1.0.4.17
• Added [Use Request Routing ID in SIP Headers] to enable/disable device to use configured Request
URI Routing ID for certain FXS port in its SIP message Header when a trunk SIP account is used.
• Added option [Add Auth Header on Initial REGISTER] to enable/disable including authentication header
in the initial REGISTER.
Firmware version 1.0.4.7
• Added option [Enable LLDP] to enable/disable LLDP.
• Added field [Request URI Routing ID] to allow device to route the calls to individual FXS ports based on
the DID, when only have one sip registration.
Firmware version 1.0.4.4
• Added option [Display Language] to choose language for LCD display.
• Added option [Prompt Dial Tone Code] to configure dial code.