Grandstream Networks, Inc.
Table of Contents CHANGE LOG ................................................................................................................ 4 Firmware Version 1.0.0.1 ....................................................................................................................... 4 INTRODUCTION ............................................................................................................. 7 PRODUCT OVERVIEW ..............................................................................
Table of Tables Table 1: HA100 Features at a Glance ........................................................................................................... 8 Table 2: HA100 Technical Specifications ...................................................................................................... 8 Table of Figures Figure 1: High Availability..............................................................................................................................
CHANGE LOG This section documents significant changes from previous firmware versions. Only major new features or major document updates are listed here. Minor updates for corrections or editing are not documented here. Firmware Version 1.0.0.1 • This is the initial version for HA100.
COPYRIGHT ©2017 Grandstream Networks, Inc. http://www.grandstream.com All rights reserved. Information in this document is subject to change without notice. Reproduction or transmittal of the entire or any part, in any form or by any means, electronic or print, for any purpose without the express written permission of Grandstream Networks, Inc. is not permitted. The latest electronic version of this user manual is available for download here: http://www.grandstream.
GNU GPL INFORMATION HA100 firmware contains third-party software licensed under the GNU General Public License (GPL). Grandstream uses software under the specific terms of the GPL. Please see the GNU General Public License (GPL) for the exact terms and conditions of the license. Grandstream GNU GPL related source code can be downloaded from Grandstream web site from: http://www.grandstream.
INTRODUCTION Thank you for using Grandstream HA100. To meet the requirements of our customers, Grandstream releases the HA100 which is a module designed to achieve High Availability function for our enterprise grad IP-PBX UCM6510. It contains a set of external ports and splits each of them into two internal ports: Port A and Port B. The ports on the 2 UCM6510s should be connected to each Port A and Port B respectively and the external ports on the HA100 provide PBX service.
PRODUCT OVERVIEW Feature Highlights The following tables contain the major features of the HA100: Table 1: HA100 Features at a Glance HA100 • Designed to provide a failover solution for the UCM6510. • Connect two UCM6510s to the HA100 to create a back-up solution and automatically switch to a secondary UCM6510 if the main one fails. • An ideal complimentary connector to the UCM6510 for businesses that need a reliable UC system without any interruptions or failures.
Equipment Packaging The following diagram illustrate the equipment packaging for the HA100: 1x HA100 1x Power Adapter 1x Quick Installation Guide 2x USB-to-RS485 Cable Figure 2: HA100 Package Contents Note: Check the package before installation. If you find anything missing, contact your reseller/distributor.
INSTALLATION Before deploying and configuring the HA100, the unit needs to be properly powered up and connected. This section describes detailed information about the HA100 interfaces and also the steps needed for installing and connecting the HA100. HA100 Interfaces The HA100 device contains 24 ports, 1 reset button and 1 ground interface. The 24 ports include 7 pairs of internal ports, 7 external ports, 2 RS485 ports and 1 power port.
HA100 Front Panel The following screenshot illustrates the front panel of the HA100 containing the external ports: 2x WAN 2x LAN T1/E1/J1 4x FXO 4x FXS Ports LEDs Ports Ports Ports Ports Ports Indication Figure 4: HA100 Front Panel The front panel contains the internal HA100 ports: - 1 pair of internal WAN ports (WAN-A, WAN-B) - 1 pair of LAN ports (LAN-A, LAN-B) - 1 pair of T1/E1/J1 ports (T1/E1/J1-A, T1/E1/J1-B) - 2 pairs of internal FXS ports (FXS 1-A, FXS 1-B, FXS 2-A, FXS 2-B) -
Figure 6: HA100 LEDs HA100 User Manual P a g e | 12
HA100 CONNECTION This section provides the connection types and steps needed for connecting the HA100 with 2 UCM6510. Powering And Connecting the HA100 The external connections are used on the external ports for following purposes: Powering up the HA100, network connection, PSTN lines connection, Analog/Fax connection and also digital (T1/E1/J1) connections. Please refer to following steps for the basic connection on the HA100: 1.
Connecting The HA100 with 2 UCM6510 This is the connection between HA100 and the 2 UCM6510s, one acting as primary server (providing online service) and the other as backup server (it doesn’t provide service until the primary server is down). Environment For the internal connection, we will assume that users have already the following environment items ready: - 4 Ethernet cables and 2 T1/E1/J1 cables. - 8 PSTN cables. - 2 USB-to-RS485 serial cables. - 2 UCM6510 (UCM A and UCM B).
Figure 8: HA100 Connection with UCM A and UCM B HA100 User Manual P a g e | 15
Function Description HA100 separates the external port into the corresponding internal ports (A and B). By default, port A is always connected and port B is always disconnected, so only one UCM device is successfully connected at one time. When the 2 UCMs connect to HA100 via port A and port B, the primary UCM uses the external port on HA100 for data transmission. Additionally, the RS485 port on HA100 receives signaling from UCM to achieve the switch between port A and port B.
EXPERIENCING HA100 Please visit our Website: http://www.grandstream.com to receive the most up- to-date updates on firmware releases, additional features, FAQs, documentation and news on new products. We encourage you to browse our product related documentation, FAQs and User and Developer Forum for answers to your general questions. If you have purchased our products through a Grandstream Certified Partner or Reseller, please contact them directly for immediate support.
FCC Compliance Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Important: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
