User Manual HandyTone-486 Analog Telephone Adaptor For SW Release Version 1.0.5.16 Grandstream Networks, Inc. www.grandstream.
HandyTone-486 User Manual Grandstream Networks, Inc. Table of Contents 1 WELCOME......................................................................................................... 3 2 INSTALLATION ................................................................................................. 4 3 WHAT IS INCLUDED IN THE PACKAGE ......................................................... 5 3.1 4 PRODUCT OVERVIEW....................................................................................
HandyTone-486 User Manual Grandstream Networks, Inc. 1 Welcome Congratulations on becoming an owner of HandyTone-486. You made an excellent choice and we hope you will enjoy all its capabilities. Grandstream's award-wining HandyTone-486 is an all-in-one VoIP integrated access device that features superb audio quality, rich functionalities, high level of integration, compactness and ultra-affordability.
HandyTone-486 User Manual Grandstream Networks, Inc. 2 Installation HandyTone-486 Analog Telephone Adaptor is an all-in-one VoIP integrated device designed to be a total solution for networks providing VoIP services. The HandyTone-486 VoIP functionalities are available via a regular analog telephone. The following photo illustrates the appearance of a HandyTone-486.
HandyTone-486 User Manual 3 Grandstream Networks, Inc. What is Included in the Package The HandyTone-486 package contains: 1) One HandyTone-486 2) One universal power adaptor 3) One Ethernet cable 3.1 Safety Compliances The HandyTone-486 is compliant with various safety standards including FCC/CE and C-tick. Its power adaptor is compliant with UL standard. The HandyTone-486 should only operate with the universal power adaptor provided in the package.
HandyTone-486 User Manual Grandstream Networks, Inc. 4 Product Overview 4.1 Key Features • • • • • • • • • • • • • • • Supports SIP 2.0(RFC 3261), TCP/UDP/IP, RTP/RTCP, HTTP, ICMP, ARP/RARP, DNS, DHCP (both client and server), NTP, PPPoE, STUN, TFTP, etc. Built-in router, NAT, Gateway and DMZ port forwarding Powerful digital signal processing (DSP) to ensure superb audio quality; advanced adaptive jitter control and packet loss concealment technology Support various vocoders including G.
HandyTone-486 User Manual Grandstream Networks, Inc. 4.2 Hardware Specification The table below describes the difference among these models. Model HandyTone-486 LAN interface WAN interface FXS telephone port PSTN port Button LED Universal Switching Power Adaptor 1xRJ45 10Base-T 1xRJ45 10Base-T 1xFXS 1x life line port 1 Green and red color Input: 100-240VAC 50-60 Hz Output: +5VDC, 1200mA, UL certified 70mm (W) 130mm (D) 27mm (H) 0.6lbs (0.
HandyTone-486 User Manual Grandstream Networks, Inc. 5 Basic Operations 5.1 Get Familiar with Key Pad and Voice Prompt HandyTone-486 has stored a voice prompt menu for quick browsing and simple configuration. To enter this voice prompt menu, simply press the button or “***” from the analog phone.
HandyTone-486 User Manual Grandstream Networks, Inc. 5.2 Make Phone Calls 5.2.1 Calling phone or extension numbers There are currently two methods to make an extension number call: a) Dial the numbers number directly and wait for 4 (default) seconds. b) Dial the numbers directly, and press # (assuming that “use #” as dial key is selected in web configuration). Other functions available during the call are call-waiting/flash, call-transfer, and callforwarding. 5.2.
HandyTone-486 User Manual Grandstream Networks, Inc. Examples: If the target IP address is 192.168.0.160, the dialing convention is Voice Prompt with option 47, then 192168000160 followed by pressing the “#” key if it is configured as a send key or wait for more than 5 seconds. In this case, the default destination port 5060 is used if no port is specified. If the target IP address/port is 192.168.1.
HandyTone-486 User Manual Grandstream Networks, Inc. 1. A presses FLASH (on the analog phone, or Hook Flash for old model phones) to get a dial tone 2. A then dial C’s number then # (or wait for 4 seconds), A and C now in conversation. 3. Then A can hang up. Note: When intended Transfer failed, if A hangs up, the HandyTone 486 will ring user A again to remind A that B is still on the call, by pressing FLASH or Hook again will restore conversation between A and B. 5.2.
HandyTone-486 User Manual Grandstream Networks, Inc. dial the forward number and hang up. *93 Cancel Delayed Call Forward To cancel this Forward, dial “*93” and get the dial tone, then hang up Flash/Hook When in conversation, this action will switch to the new incoming call if user heard the call waiting sound. When in conversation and no incoming call heard, this action will switch to a new channel for a new call. 5.3.
HandyTone-486 User Manual 6 Grandstream Networks, Inc. Configuration Guide 6.1 Configuring HandyTone-486 WAN IP through Voice Prompt 6.1.1 DHCP Mode Follow section 5.1 with voice menu option 01 to enable HandyTone-486 to use DHCP. 6.1.2 STATIC IP Mode Follow section 5.1 with voice menu option 01 to enable HandyTone-486 to use STATIC IP mode, then use option 02, 03, 04 to set up HandyTone’s IP, Subnet Mask, Gateway respectively. 6.
HandyTone-486 User Manual Grandstream Networks, Inc. Welcome to Grandstream HandyTone-486 Password Login The password is case sensitive and the factory default password for End User password is ‘123’. After the correct password is entered in the login screen, the embedded Web server inside the HandyTone-486 will respond with the Configuration Menu screen which is explained in details below. Grandstream HandyTone 486 Configuration MAC Address: WAN IP Address: Product Model: Software Version: 00.0B.82.
HandyTone-486 User Manual Grandstream Networks, Inc. Cloned WAN MAC Addr: LAN Subnet Mask: LAN DHCP Base IP: DHCP IP Lease Time: (in hex format) 255.255.255.0 (default is 255.255.255.0) 192.168.2.1 (base IP for the LAN port, default is 192.168.2.
HandyTone-486 User Manual Grandstream Networks, Inc. MAC Address The device ID, in HEX format. This is very important ID for ISP troubleshooting. WAN IP Address This field shows WAN port IP address. Product Model This field contains the product model info. Software Version Program: This is the main software release, its number is always used for firmware upgrade. Bootloader: This is normally not changed. HTML: This is the user interface, normally not changed.
HandyTone-486 User Manual Grandstream Networks, Inc. LAN DHCP Base IP: Base IP for the LAN port, which function as a Gateway for the subnet. Default value is 192.168.2.1 DHCP IP Lease Time: Value is set in units of hours. Default value is 120hr (5 Days.) The time IP address are assigned to the LAN clients DMZ IP: Forward all WAN IP traffic to a specific IP address if no matching port is used by HandyTone-486 itself or in the defined port forwarding.
HandyTone-486 User Manual Grandstream Networks, Inc. (will attempt PPPoE if DHCP fails and following is non-blank) PPPoE account ID: PPPoE password: 0 Use this DNS server (if specified): . 0 . 0 . 0 statically configured as: SIP Server: IP Address: 192 Subnet Mask: 255 Default Router: 192 DNS Server 1: 192 DNS Server 2: 0 sip.mycompany.com Outbound Proxy: 168 . 255 . 168 . 168 . 0 . . . . . . 0 255 0 0 0 . . . . . 108 0 1 1 0 (e.g., sip.mycompany.com, or IP address) (e.
HandyTone-486 User Manual Grandstream Networks, Inc. 0 Layer 2 QoS: 802.
HandyTone-486 User Manual FXS Impedance: NTP Server: Time Zone: Grandstream Networks, Inc. current setting is "600 Ohm (North America)" time.nist.
HandyTone-486 User Manual Grandstream Networks, Inc. Preferred Vocoder The HandyTone ATA supports up to 6 different vocoder types including G.711 A-/Ulaw，G.723.1, G.726, G.728, G.729A/B, iLBC. Depending on the product model, some of these vocoders may not be provided in standard release. A user can configure vocoders in a preference list that will be included with the same preference order in SDP message. The first vocoder in this list can be entered by choosing the appropriate option in “Choice 1”.
HandyTone-486 User Manual Grandstream Networks, Inc. Register Expiration This parameter allows the user to specify the time frequency (in minutes) the HandyTone ATA will refresh its registration with the specified registrar. The default interval is 60 minutes (or 1 hour). The maximum interval is 65535 minutes (about 45 days). Early Dial Default is No. Use only if proxy supports 484 response Dial Plan Prefix Sets the prefix added to each dialed number No Key Entry timeout Default is 4 seconds.
HandyTone-486 User Manual Grandstream Networks, Inc. Auto Upgrade Choose Yes to enable HTTP upgrade and provisioning. In “Check for new firmware every” field, enter the number of days to check the HTTP server for firmware upgrade or configuration. Subscribe for MWI: Default is NO. When set to Yes a SUBSCRIBE for Message Waiting Indication will be sent periodically. Offhook Auto-Dial This parameter allows a user to configure a User ID or extension number to be automatically dialed upon offhook.
HandyTone-486 User Manual Grandstream Networks, Inc. 6.2.4 Saving the Configuration Changes Once a change is made, the user should press the “Update” button in the Configuration Menu. The HandyTone ATA will then display the following screen to confirm that the changes have been saved. Grandstream HandyTone-486 Configuration Update Status Your configuration changes have been saved. They will take effect on next reboot.
HandyTone-486 User Manual Grandstream Networks, Inc. 6.3 Configuration through a Central Server Grandstream HandyTone ATAs can be automatically configured from a central provisioning system. When HandyTone ATA boot up, it will send TFTP or HTTP request to download configuration files, there are two configuration files, one is “cfg.txt” and the other is “cfg000b82xxxxxx”, where “000b82xxxxxx” is the MAC address of the HandyTone ATA.
HandyTone-486 User Manual Grandstream Networks, Inc. 7 Software Upgrade 7.1 Upgrade through HTTP To upgrade software, HandyTone ATAs can be configured with an HTTP server where the new code image file is located. For example, following URL in the HTTP Upgrade Server: http://firmware.mycompany.com:6688/Grandstream/1.0.5.16 Here, firmware.mycompany.com is the FQDN of the HTTP server, “:6688” is the TCP port the HTTP server listening to, “/Grandstream/1.0.5.
HandyTone-486 User Manual Grandstream Networks, Inc. environment if possible. For users who do not have local TFTP server, Grandstream provides a NAT-friendly TFTP server on the public Internet for users to download the latest firmware upgrade automatically. Please check the Service or Support section of Grandstream’s Web site to obtain this TFTP server IP address.
HandyTone-486 User Manual 8 Grandstream Networks, Inc. Restore Factory Default Setting Warning: Restore the Factory Default Setting will delete all configuration information of the device. Step one: Find the MAC Address of the device. The MAC address of the device is located on the bottom of the device. It is a 12 digits number. Step two: Encode the MAC address. The encode rule is: “2” is the first letter on the button “2” so its encoding is “2”.
