User Manual HandyTone-486 Analog Telephone Adaptor For Firmware Version 1.0.6.0 Grandstream Networks, Inc. www.grandstream.
HandyTone-486 User Manual Grandstream Networks, Inc. Table of Contents 1 WELCOME..................................................................................................................... 3 2 INSTALLATION ............................................................................................................ 4 3 WHAT IS INCLUDED IN THE PACKAGE ............................................................... 5 3.1 4 PRODUCT OVERVIEW ......................................................
HandyTone-486 User Manual 1 Grandstream Networks, Inc. Welcome Congratulations on becoming an owner of HandyTone-486. You made an excellent choice and we hope you will enjoy all its capabilities. Grandstream's award-wining HandyTone-486 is an all-in-one VoIP integrated access device that features superb audio quality, rich functionalities, high level of integration, compactness and ultra-affordability.
HandyTone-486 User Manual 2 Grandstream Networks, Inc. Installation HandyTone-486 Analog Telephone Adaptor is an all-in-one VoIP integrated device designed to be a total solution for networks providing VoIP services. The HandyTone-486 VoIP functionalities are available via a regular analog telephone. The following photo illustrates the appearance of a HandyTone-486.
HandyTone-486 User Manual 3 Grandstream Networks, Inc. What is Included in the Package The HandyTone-486 package contains: 1) One HandyTone-486 2) One universal power adaptor 3) One Ethernet cable 3.1 Safety Compliances The HandyTone-486 is compliant with various safety standards including FCC/CE and C-tick. Its power adaptor is compliant with UL standard. The HandyTone-486 should only operate with the universal power adaptor provided in the package.
HandyTone-486 User Manual 4 Grandstream Networks, Inc. Product Overview 4.1 Key Features • • • • • • • • • • • • • • • Supports SIP 2.0(RFC 3261), TCP/UDP/IP, RTP/RTCP, HTTP, ICMP, ARP/RARP, DNS, DHCP (both client and server), NTP, PPPoE, STUN, TFTP, etc. Built-in router, NAT, Gateway and DMZ port forwarding Powerful digital signal processing (DSP) to ensure superb audio quality; advanced adaptive jitter control and packet loss concealment technology Support various codecs including G.
HandyTone-486 User Manual Grandstream Networks, Inc. 4.2 Hardware Specification The table below describes the features of the model. Model HandyTone-486 LAN interface WAN interface FXS telephone port PSTN port Button LED Universal Switching Power Adaptor 1xRJ45 10Base-T 1xRJ45 10Base-T 1xFXS 1x PSTN pass through or life line port 1 Green and red color Input: 100-240VAC 50-60 Hz Output: +5VDC, 1200mA, UL certified 70mm (W) 130mm (D) 27mm (H) 0.6lbs (0.
HandyTone-486 User Manual 5 Grandstream Networks, Inc. Basic Operations 5.1 Get Familiar with Key Pad and Voice Prompt HandyTone-486 has stored a voice prompt menu (Interactive Voice Response or IVR) for quick browsing and simple configuration. To enter this voice prompt menu, simply press the button or “***” from the analog phone.
HandyTone-486 User Manual Grandstream Networks, Inc. • • • • ‘*’ functions similar to ‘↓’ key of BT-100 phone to select the next menu option ‘#’ returns back to main MENU ‘9’ is similar to ENTER key in many cases to confirm an option All entered digit sequences have known lengths - 2 digits for menu option and 12 digits for IP address.
HandyTone-486 User Manual Grandstream Networks, Inc. *4 (encoding for “:”) followed by the encoded port number. Following is a table of the encoding scheme for the most commonly used characters: F 00 01 02 03 04 05 06 07 08 09 *0 *4 0 1 2 3 4 5 6 7 8 9 . (dot character) : (column character) Examples: If the target IP address is 192.168.0.
HandyTone-486 User Manual Grandstream Networks, Inc. • Call Flashing. When in conversation, user can also flash to the third party by pressing flash(or Flash Hook for old style phones) button to get a dial tone and then dial the third party number. 5.2.4 Blind Transfer Assume that call party A and B are in conversation. A wants to Blind Transfer B to C: 1. A presses FLASH (on the analog phone, or Hook Flash for old model phones) to get a dial tone. 2.
HandyTone-486 User Manual Grandstream Networks, Inc. 1. A presses FLASH (on the analog phone, or Hook Flash for old model phones) to get a dial tone 2. A then dial C’s number then # (or wait for 4 seconds), A and C now in conversation. 3. Then A can hang up. NOTES: • When intended Transfer failed, if A hangs up, the HandyTone 486 will ring user A back again to remind A that B is still on the call, by pressing FLASH or Hook again will restore conversation between A and B. 5.2.
HandyTone-486 User Manual *70 *71 *72 *73 *90 *91 *92 *93 Flash/Hook Grandstream Networks, Inc. Disable Call Waiting. (Per Call) Enable Call Waiting (Per Call) Unconditional Call Forward. To use this feature, dial “*72”, wait for the dial tone. Then dial the forward number, wait for dial tone, hang up. Cancel Unconditional Call Forward To cancel “Unconditional Call Forward”, dial “*73” and get the dial tone, then hang up. Busy Call Forward To use this feature, dial “*90”, wait for the dial tone.
HandyTone-486 User Manual Grandstream Networks, Inc. 5.5 Sending and Receiving Fax Grandstream HandyTone series support two modes for Fax over IP, one is T.38, the other is Fax pass through. T.38 mode is used by default. 5.6 LED Light Pattern Indication Following are the LED light pattern indication.
HandyTone-486 User Manual 6 Grandstream Networks, Inc. Configuration Guide 6.1 Configuring HandyTone-486 WAN IP through Voice Prompt 6.1.1 DHCP Mode Follow section 5.1 with voice menu option 01 to enable HandyTone-486 to use DHCP. 6.1.2 STATIC IP Mode Follow section 5.1 with voice menu option 01 to enable HandyTone-486 to use STATIC IP mode, then use option 02, 03, 04 to set up HandyTone’s IP, Subnet Mask, Gateway respectively. 6.
HandyTone-486 User Manual Grandstream Networks, Inc. http://HandyTone-IP-Address, where the HandyTone-IP-Address is the WAN IP address of the HandyTone486. NOTE: • If typing IP address into address of browser to get into the configuration page, please strip out the “0” announced in IVR or displayed in the phone if using BT or GXP phones as the browser will parse in octet. e.g.: If IVR announce the IP address: 192.168.001.014, please just key in IP address into the address field by: 192.168.1.14.
HandyTone-486 User Manual Grandstream Networks, Inc. Following are configuration pages End User will see once log in correctly: • Basic Settings Page: Grandstream Device Configuration STATUS BASIC SETTINGS End User Password: IP Address: ADVANCED SETTINGS (purposely not displayed for security protection) dynamically assigned via DHCP (default) or PPPoE (will attempt PPPoE if DHCP fails and following is nonblank) PPPoE account ID: PPPoE password: Preferred DNS server: 0 . 0 . 0 .
HandyTone-486 User Manual Grandstream Networks, Inc.
HandyTone-486 User Manual Grandstream Networks, Inc. This parameter controls how the displayed date/time will be adjusted according to the specified time zone. Time Zone Savings This parameter controls whether the displayed time will be daylight savings time or not. If set to Yes, then the displayed time will be 1 hour ahead of normal time. Daylight Time Cloned WAN MAC Allow the user to set a specific MAC address. Set in Hex format Address: LAN Subnet Mask Sets the LAN subnet mask.
HandyTone-486 User Manual PPPoE Link Up: NAT: NAT Mapped IP: NAT Mapped Port: Total Inbound Calls: Total Outbound Calls: Total Missed Calls: Total Call Time (in minutes): Total SIP Message Sent: Total SIP Message Received: Total RTP Packet Sent: Total RTP Packet Received: Total RTP Packet Loss: Grandstream Networks, Inc. disabled detected NAT type is full cone 70.22.149.194 61063 0 1 0 1 12 14 341 392 1 All Rights Reserved Grandstream Networks, Inc. 2005 MAC Address The device ID, in HEX format.
HandyTone-486 User Manual NAT Mapped IP Grandstream Networks, Inc. WAN side public IP if connected to LAN of a SOHO router. Other Statistical Self explainable, see the page displayed. Status of ATA BASIC SETTINGS: End User Password This contains the password to access the Web Configuration Menu. This field is case sensitive with max.
HandyTone-486 User Manual LAN Subnet Mask Grandstream Networks, Inc. Sets the LAN subnet mask. Default value is 255.255.255.0 LAN DHCP Base Base IP for the LAN port, which function as a Gateway for the subnet. Default value is 192.168.2.1 IP: DHCP Time: IP Lease Value is set in units of hours. Default value is 120hr (5 Days.
HandyTone-486 User Manual Grandstream Networks, Inc. Traversal Setting and other miscellaneous configurations. Following is the snap shot of the configuration page. Grandstream Device Configuration STATUS BASIC SETTINGS ADVANCED SETTINGS Admin Password: SIP Server: (purposely not displayed for security protection) sip.serviceprovider.com Outbound Proxy: (e.g., proxy.myprovider.
HandyTone-486 User Manual Grandstream Networks, Inc. Layer 2 QoS: 802.1Q/VLAN Tag Use DNS SRV: No User ID is phone number: No SIP Registration: Yes No Unregister On Reboot: Yes No Register Expiration: 60 Early Dial: 802.
HandyTone-486 User Manual Grandstream Networks, Inc. Disable CallWaiting: No Send DTMF: in-audio DTMF Payload Type: Send Flash Event: FXS Impedance: Caller ID Scheme: Onhook Voltage: Polarity Reversal: NTP Server: Yes via RTP (RFC2833) via SIP INFO 101 No Yes (Flash will be sent as a DTMF event if set to Yes) current setting is " 600 Ohm (North America)" current setting is " Bellcore" current setting is " 36V" No Yes (reverse polarity upon call establishment and termination) time.nist.
HandyTone-486 User Manual Grandstream Networks, Inc. Authentication Password Account information, password for ATA to register to (SIP) servers of ITSP. Name Field for user to put in additional information to be displayed when calling, like caller ID. Preferred Vocoder The HandyTone ATA supports up to 7 different codec types including G.711 A/U law，G.723.1, G.726, G.728, G.729A/B, iLBC. Depending on the product model, some of these codecs may not be provided in standard release.
HandyTone-486 User Manual Grandstream Networks, Inc. Unregister on Reboot Default is No. If set to yes, the SIP user will be unregistered on reboot. Register Expiration This parameter allows the user to specify the time frequency (in minutes) the HandyTone ATA will refresh its registration with the specified registrar. The default interval is 60 minutes (or 1 hour). The maximum interval is 65535 minutes (about 45 days). Early Dial Default is No.
HandyTone-486 User Manual Via HTTP Server Grandstream Networks, Inc. Upgrade The URL for the web server used for firmware upgrade and configuration via HTTP. For example, http://provisioning.mycompany.com:6688/Grandstream/1.0.6.0 Here “:6688” is the specific TCP port that the HTTP server is listening to, it can be omitted if using default port 80. Note: Auto Upgrade has to be set to Yes to enable HTTP upgrade. TFTP and HTTP options are mutual exclusive.
HandyTone-486 User Manual Grandstream Networks, Inc. PSTN Access Code Default is “*00”. By press the code, user can switch the phone connected to ATA to PSTN line connected to the Line port of ATA and call out using PSTN. User can change this to other access code like “8” or “9” or whatever user prefer. This is very useful when emergence happens to call “911”.
HandyTone-486 User Manual Grandstream Networks, Inc. 6.2.4 Saving the Configuration Changes Once a change is made, the user should click the “Update” button in the Configuration Menu. The HandyTone ATA will then display the following screen to confirm that the changes have been saved. Grandstream Device Configuration STATUS BASIC SETTINGS ADVANCED SETTINGS Your configuration changes have been saved. They will take effect on next reboot. All Rights Reserved Grandstream Networks, Inc. 2005 6.2.
HandyTone-486 User Manual Grandstream Networks, Inc. 6.3 Configuration through a Central Server Grandstream HandyTone ATAs can be automatically configured from a central provisioning system. When HandyTone ATA boot up, it will send TFTP or HTTP request to download configuration files, there are two configuration files, one is “cfg.txt” and the other is “cfg000b82xxxxxx”, where “000b82xxxxxx” is the MAC address of the HandyTone ATA.
HandyTone-486 User Manual 7 Grandstream Networks, Inc. Software Upgrade 7.1 Upgrade through HTTP To upgrade software, HandyTone ATAs can be configured with an HTTP server where the new code image file is located. For example, following URL in the HTTP Upgrade Server: http://firmware.mycompany.com:6688/Grandstream/1.0.6.0 Here, firmware.mycompany.com is the FQDN of the HTTP server, “:6688” is the TCP port the HTTP server listening to, “/Grandstream/1.0.6.
HandyTone-486 User Manual Grandstream Networks, Inc. Once the TFTP server is configured, power cycle the HandyTone ATA to start TFTP upgrade. TFTP checking is only performed during the initial power up. If the configured TFTP server is found and a new code image is available, the HandyTone ATA will attempt to retrieve the new image files by downloading them into the HandyTone ATA’s SRAM. During this stage, the HandyTone ATA’s LEDs will blink in red until the checking/downloading process is completed.
HandyTone-486 User Manual 8 Grandstream Networks, Inc. Restore Factory Default Setting Warning: Restore the Factory Default Setting will erase all configuration information of the device. • Step one: Find the MAC Address of the device. The MAC address of the device is located on the bottom of the device. It is a 12 digits hex number. • Step two: Encode the MAC address to decimal digits. The encode rule is: “2” is the first letter on the button “2” so its encoding is “2”.
