User Manual
Table Of Contents
- DOCUMENT PURPOSE
- CHANGE LOG
- GUI INTERFACE EXAMPLES
- WELCOME
- PRODUCT OVERVIEW
- GETTING STARTED
- BASIC OPERATIONS
- Turning the Handset ON / OFF
- Setup Wizard
- Register DP720 Handset to DP750 Base Station
- Using DP720 with Multiple DP750 Base Stations
- Unregister the DP720
- Obtain DP750 Base Station IP Address via paired DP720
- Setting the Key Lock
- Locating a DP720 Handset from DP750 Base station
- Checking System Status
- Basic Network Settings
- Change Menu and LCD Timeout
- Return to Idle Screen
- Register a SIP Account
- PHONE SETTINGS
- Editing the Handset’s name
- Changing the Base PIN Code
- Selecting Phone Language
- Activate/Deactivate Hands-Free Mode
- Muting the Microphone
- Adjusting Speaker and Earpiece Volume
- Ringtones
- Date and Time
- Outgoing Default Line
- Factory Functions
- DP720 Handset Firmware Upgrade
- Reboot DP750 Base Station
- Reset DP720 Handset
- CALL OPERATIONS
- RESTORE FACTORY DEFAULT SETTINGS
- EXPERIENCING DP750/DP720
P a g e | 19
DP750/DP720 User Guide
Version 1.0.3.31
Connecting DP750
To setup the DP750 Base Station, please follow the steps below:
Figure 3: DP750 Back View
You have two options for power and network connection of the base station: AC power or Power over
Ethernet (PoE)
Note: For better signal range, we recommend to install DP750 horizontally with LED side facing toward the
usage area. For example, if you just put it on a desk, the LED better face up, if you mount it on the ceiling, it
better LED face down, in both cases, it toward the space area.
Connecting via AC power
1. Connect the micro-USB connector into the related port on the base station and connect the other
end of the power adapter into an electrical power outlet.
2. Connect the supplied Ethernet cable between the Internet port on the base station and the Internet
port in your network or the switch/hub device port.
Figure 4: Connecting the Base station
Connecting via PoE
To connect the base station using PoE, you need to connect the Ethernet cable provided (or 3rd party
network cable) between the Network Socket on the base station to Ethernet port of your PoE switch/hub.
Reset Button
Power Input
Radio / Page Button
Network Socket