User Manual
Table Of Contents
- DOCUMENT PURPOSE
- CHANGE LOG
- GUI INTERFACE EXAMPLES
- WELCOME
- PRODUCT OVERVIEW
- GETTING STARTED
- BASIC OPERATIONS
- Turning the Handset ON / OFF
- Setup Wizard
- Register DP720 Handset to DP750 Base Station
- Using DP720 with Multiple DP750 Base Stations
- Unregister the DP720
- Obtain DP750 Base Station IP Address via paired DP720
- Setting the Key Lock
- Locating a DP720 Handset from DP750 Base station
- Checking System Status
- Basic Network Settings
- Change Menu and LCD Timeout
- Return to Idle Screen
- Register a SIP Account
- PHONE SETTINGS
- Editing the Handset’s name
- Changing the Base PIN Code
- Selecting Phone Language
- Activate/Deactivate Hands-Free Mode
- Muting the Microphone
- Adjusting Speaker and Earpiece Volume
- Ringtones
- Date and Time
- Outgoing Default Line
- Factory Functions
- DP720 Handset Firmware Upgrade
- Reboot DP750 Base Station
- Reset DP720 Handset
- CALL OPERATIONS
- RESTORE FACTORY DEFAULT SETTINGS
- EXPERIENCING DP750/DP720
P a g e | 29
DP750/DP720 User Guide
Version 1.0.3.31
Note: “Subscribe” softkey appears only if DP720 is not registered to any DP750 base station.
3. Select BaseX (X=1-4) corresponding to the desired base station DP750, then press Subscribe.
4. The DP720 will search for nearby base stations and will display the RFPI code and base station
name of the discovered DP750.
5. Press Subscribe to pair with the displayed DP750.
6. The DP720 will display Easy Pairing on the LCD and play an audible buzz when successful. Then it
will return to the home screen, displaying the handset name and number assigned by the registered
base station.
Figure 10: Registration process
Using DP720 with Multiple DP750 Base Stations
DP720 is able to be registered to up four different DP750 base stations.
Registering DP720 to an additional DP750 base station
Considering DP720 is previously registered to an initial base station, please follow below steps to register a
handset to an additional base station:
1. Press Menu (left softkey or the selection key ) to bring up operation menu.
2. Use arrow keys to reach Settings and navigate to Registration.