User Manual
Table Of Contents
- DOCUMENT PURPOSE
- CHANGE LOG
- GUI INTERFACE EXAMPLES
- WELCOME
- PRODUCT OVERVIEW
- GETTING STARTED
- BASIC OPERATIONS
- Turning the Handset ON / OFF
- Setup Wizard
- Register DP720 Handset to DP750 Base Station
- Using DP720 with Multiple DP750 Base Stations
- Unregister the DP720
- Obtain DP750 Base Station IP Address via paired DP720
- Setting the Key Lock
- Locating a DP720 Handset from DP750 Base station
- Checking System Status
- Basic Network Settings
- Change Menu and LCD Timeout
- Return to Idle Screen
- Register a SIP Account
- PHONE SETTINGS
- Editing the Handset’s name
- Changing the Base PIN Code
- Selecting Phone Language
- Activate/Deactivate Hands-Free Mode
- Muting the Microphone
- Adjusting Speaker and Earpiece Volume
- Ringtones
- Date and Time
- Outgoing Default Line
- Factory Functions
- DP720 Handset Firmware Upgrade
- Reboot DP750 Base Station
- Reset DP720 Handset
- CALL OPERATIONS
- RESTORE FACTORY DEFAULT SETTINGS
- EXPERIENCING DP750/DP720
P a g e | 32
DP750/DP720 User Guide
Version 1.0.3.31
Obtain DP750 Base Station IP Address via paired DP720
DP750 is by default configured to obtain IP address from DHCP server where the unit is located. In order to
know which IP address is assigned to your DP750, please follow below steps using a paired DP720 handset
with your DP750 base station. Please see Register DP720 Handset to DP750 Base Station .
1. Press “Menu” (left softkey) or OK button on DP720 to view operation menu.
2. Press Arrow (Up, Down, Left, Right) keys to move the cursor to Status icon , then press
“Select” (left softkey) or OK button .
3. Using arrow keys, navigate down to view the IP address of the DP750.
Setting the Key Lock
You can lock the keypad against unintentional entries. It is, however, still possible to pick up incoming calls
even with the keypad locked.
• To enable the Keypad Lock
1. Press the Pound key “#” and hold for approximately 2 seconds.
2. The display shows Keypad Locked briefly and the key lock icon appears in the display.