User Manual
Table Of Contents
- DOCUMENT PURPOSE
- CHANGE LOG
- GUI INTERFACE EXAMPLES
- WELCOME
- PRODUCT OVERVIEW
- GETTING STARTED
- BASIC OPERATIONS
- Turning the Handset ON / OFF
- Setup Wizard
- Register DP720 Handset to DP750 Base Station
- Using DP720 with Multiple DP750 Base Stations
- Unregister the DP720
- Obtain DP750 Base Station IP Address via paired DP720
- Setting the Key Lock
- Locating a DP720 Handset from DP750 Base station
- Checking System Status
- Basic Network Settings
- Change Menu and LCD Timeout
- Return to Idle Screen
- Register a SIP Account
- PHONE SETTINGS
- Editing the Handset’s name
- Changing the Base PIN Code
- Selecting Phone Language
- Activate/Deactivate Hands-Free Mode
- Muting the Microphone
- Adjusting Speaker and Earpiece Volume
- Ringtones
- Date and Time
- Outgoing Default Line
- Factory Functions
- DP720 Handset Firmware Upgrade
- Reboot DP750 Base Station
- Reset DP720 Handset
- CALL OPERATIONS
- RESTORE FACTORY DEFAULT SETTINGS
- EXPERIENCING DP750/DP720
P a g e | 34
DP750/DP720 User Guide
Version 1.0.3.31
Locate via DP750 Base station
1. On DP750 Base station back side, press Radio/Page button .
2. All registered handsets will receive Paging call.
3. Once located, you can end the paging calling by pressing any key on the handsets or by pressing
again Radio/Page button.
Checking System Status
You can view the system status on your handset including the following information of the system:
Table 9: DP720 Info description
Item
Description
Model (RF)
Displays the product model, hardware version and DECT region of DP720.
i.e.: DP720 1.4A (EU)
Firmware
Current firmware version installed on DP720. i.e.: 1.0.3.31
IP Address
IP address of the base station DP750 if registered.
Subnet Mask
Subnet Mask of the base station DP750 if registered.
Gateway
Gateway IP of the base station DP750 if registered.
MAC address
MAC address of the base station DP750 if registered.
IPEI
International Portable Equipment Identifier.
Unique “serial number” for DECT handsets.
• To check the handset status
1. Press Menu (left softkey or the selection key ) to bring up operation menu.
2. Use arrow keys to reach Status menu .
Basic Network Settings
Once connected to the network, DP750 base station will attempt to contact a DHCP server to obtain valid
network settings (e.g., IP address, subnet mask, gateway address and DNS address) by default.
The users could also configure basic network settings manually from a registered DP720 Handset. In order
to configure the network settings manually, please follow the steps below: