User Manual
Table Of Contents
- DOCUMENT PURPOSE
- CHANGE LOG
- GUI INTERFACE EXAMPLES
- WELCOME
- PRODUCT OVERVIEW
- GETTING STARTED
- BASIC OPERATIONS
- Turning the Handset ON / OFF
- Setup Wizard
- Register DP720 Handset to DP750 Base Station
- Using DP720 with Multiple DP750 Base Stations
- Unregister the DP720
- Obtain DP750 Base Station IP Address via paired DP720
- Setting the Key Lock
- Locating a DP720 Handset from DP750 Base station
- Checking System Status
- Basic Network Settings
- Change Menu and LCD Timeout
- Return to Idle Screen
- Register a SIP Account
- PHONE SETTINGS
- Editing the Handset’s name
- Changing the Base PIN Code
- Selecting Phone Language
- Activate/Deactivate Hands-Free Mode
- Muting the Microphone
- Adjusting Speaker and Earpiece Volume
- Ringtones
- Date and Time
- Outgoing Default Line
- Factory Functions
- DP720 Handset Firmware Upgrade
- Reboot DP750 Base Station
- Reset DP720 Handset
- CALL OPERATIONS
- RESTORE FACTORY DEFAULT SETTINGS
- EXPERIENCING DP750/DP720
P a g e | 35
DP750/DP720 User Guide
Version 1.0.3.31
1. Press Menu (left softkey or the selection key ) to bring up operation menu.
2. Use arrow keys to reach Settings and access Network Settings menu.
3. Enter the system PIN code (default: 0000) and press the softkey “Done” (left softkey ).
4. To change to static IP, press or to select Static from the IP Settings field.
5. Enter valid values in the IP Address, Subnet Mask, Gateway, DNS Server fields.
6. Press softkey “Save” ( ) to save and apply the new changes.
Note: A prompt message will be displayed to confirm that the new settings are saved successfully
7. The DP720 will display a reboot confirmation message, select “Yes” to apply the new settings or “No”
to avoid rebooting the DP750.
Figure 15: Network Settings configuration
Change Menu and LCD Timeout
1. Press Menu (left softkey or the selection key ) to bring up operation menu.
2. Use arrow keys to reach Settings .