User Manual
Table Of Contents
- DOCUMENT PURPOSE
- CHANGE LOG
- GUI INTERFACE EXAMPLES
- WELCOME
- PRODUCT OVERVIEW
- GETTING STARTED
- BASIC OPERATIONS
- Turning the Handset ON / OFF
- Setup Wizard
- Register DP720 Handset to DP750 Base Station
- Using DP720 with Multiple DP750 Base Stations
- Unregister the DP720
- Obtain DP750 Base Station IP Address via paired DP720
- Setting the Key Lock
- Locating a DP720 Handset from DP750 Base station
- Checking System Status
- Basic Network Settings
- Change Menu and LCD Timeout
- Return to Idle Screen
- Register a SIP Account
- PHONE SETTINGS
- Editing the Handset’s name
- Changing the Base PIN Code
- Selecting Phone Language
- Activate/Deactivate Hands-Free Mode
- Muting the Microphone
- Adjusting Speaker and Earpiece Volume
- Ringtones
- Date and Time
- Outgoing Default Line
- Factory Functions
- DP720 Handset Firmware Upgrade
- Reboot DP750 Base Station
- Reset DP720 Handset
- CALL OPERATIONS
- RESTORE FACTORY DEFAULT SETTINGS
- EXPERIENCING DP750/DP720
P a g e | 55
DP750/DP720 User Guide
Version 1.0.3.31
Answering Calls
When receiving an incoming call, you can answer the call using following steps:
• Earpiece mode:
Press Dial Key to pick up the call, or “Accept” softkey (left softkey ).
• Speakerphone mode:
Press Speaker Key to pick up the call.
• Headset mode:
Press Dial Key to pick up the call, or “Accept” softkey (left softkey ) using a connected
headset.
Note:
- To answer an incoming call during an established call, press Dial Key , or the Speaker Key
, or the “Answer” softkey. The incoming call is answered, and the original call is placed on hold.
- You can switch off the ringer temporarily by pressing Silent softkey.
Auto Answer
Users can enable Auto Answer feature to accept and automatically answer incoming calls.
If enabled, DP720 Handset will automatically answer incoming calls using speaker mode.
To activate / deactivate the auto answer feature:
• Using DP720 Handset Menu
1. Press Menu (left softkey or the selection key ) to bring up operation menu.
2. Use arrow keys to reach Settings User Settings, and navigate to Auto Answer using the
up/down arrow keys.
3. Switch between Enabled/Disabled using left/right arrow keys and “Save” after Enabling / Disabling
the option.
• Using DP750 Base Station Web Interface
1. Access DP750 Base Station Web Interface.
2. Go to DECT Handset Settings HS# Settings.
3. Set “Enable Auto Answer” to “Yes”. (By default, set to “No”).