User Manual
Table Of Contents
- DOCUMENT PURPOSE
- CHANGE LOG
- GUI INTERFACE EXAMPLES
- WELCOME
- PRODUCT OVERVIEW
- GETTING STARTED
- BASIC OPERATIONS
- Turning the Handset ON / OFF
- Setup Wizard
- Register DP720 Handset to DP750 Base Station
- Using DP720 with Multiple DP750 Base Stations
- Unregister the DP720
- Obtain DP750 Base Station IP Address via paired DP720
- Setting the Key Lock
- Locating a DP720 Handset from DP750 Base station
- Checking System Status
- Basic Network Settings
- Change Menu and LCD Timeout
- Return to Idle Screen
- Register a SIP Account
- PHONE SETTINGS
- Editing the Handset’s name
- Changing the Base PIN Code
- Selecting Phone Language
- Activate/Deactivate Hands-Free Mode
- Muting the Microphone
- Adjusting Speaker and Earpiece Volume
- Ringtones
- Date and Time
- Outgoing Default Line
- Factory Functions
- DP720 Handset Firmware Upgrade
- Reboot DP750 Base Station
- Reset DP720 Handset
- CALL OPERATIONS
- RESTORE FACTORY DEFAULT SETTINGS
- EXPERIENCING DP750/DP720
P a g e | 56
DP750/DP720 User Guide
Version 1.0.3.31
Off-Cradle Pickup
Users can enable Off-Cradle Pickup feature to automatically answer incoming calls after picking up DP720
Handset from its cradle. Incoming calls will be automatically answered using earpiece mode.
Notes:
▪ DP720 Handset should be resting on its cradling and then picked up for this feature to work.
▪ “Auto Answer” feature should be set to “No” to work properly.
To activate / deactivate the off-cradle pickup:
• Using DP720 Handset Menu
1. Press Menu (left softkey or the selection key ) to bring up operation menu.
2. Use arrow keys to reach Settings User Settings, and navigate to Off-Cradle Pickup using
the up/down arrow keys.
3. Switch between Enabled/Disabled using left/right arrow keys and “Save” after Enabling / Disabling
the option.
• Using DP750 Base Station Web Interface
1. Access DP750 Base Station Web Interface.
2. Go to DECT Handset Settings HS# Settings.
3. Set “Enable Onhook on Cradle Reposition” to “Yes”. (By default, set to “No”).
Ending Calls
To terminate the calls, press Hang-Up key .
On-Cradle Hang-up
Users can enable On-Cradle Hang-up feature to automatically end ongoing calls after placing DP720
Handset on its cradle.
To activate / deactivate the on-cradle hang-up feature:
• Using DP720 Handset Menu
1. Press Menu (left softkey or the selection key ) to bring up operation menu.